mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-25 03:18:51 +09:00
![TsiChung Liew](/assets/img/avatar_default.png)
Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in cmd_init.c. Add CONFIG_MII_INIT to board configuration files that use mii_init() in cmd_init.c. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
434 lines
14 KiB
C
434 lines
14 KiB
C
/*
|
|
* (C) Copyright 2006
|
|
* Markus Klotzbuecher, DENX Software Engineering, mk@denx.de
|
|
*
|
|
* Configuation settings for the SPC1920 board.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_SPC1920 1 /* SPC1920 board */
|
|
#define CONFIG_MPC885 1 /* MPC885 CPU */
|
|
|
|
#define CONFIG_8xx_CONS_SMC1 /* Console is on SMC1 */
|
|
#undef CONFIG_8xx_CONS_SMC2
|
|
#undef CONFIG_8xx_CONS_NONE
|
|
|
|
#define CONFIG_MII
|
|
#define CONFIG_MII_INIT 1
|
|
#undef CONFIG_ETHER_ON_FEC1
|
|
#define CONFIG_ETHER_ON_FEC2
|
|
#define FEC_ENET
|
|
#define CONFIG_FEC2_PHY 1
|
|
|
|
#define CONFIG_BAUDRATE 19200
|
|
|
|
/* use PLD CLK4 instead of brg */
|
|
#define CFG_SPC1920_SMC1_CLK4
|
|
|
|
#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */
|
|
#define CONFIG_8xx_CPUCLK_DEFAULT 50000000
|
|
#define CFG_8xx_CPUCLK_MIN 40000000
|
|
#define CFG_8xx_CPUCLK_MAX 133000000
|
|
|
|
#define CFG_RESET_ADDRESS 0xC0000000
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_LAST_STAGE_INIT
|
|
|
|
#if 0
|
|
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
|
|
#else
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
#endif
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"dhcp;" \
|
|
"setenv bootargs root=/dev/nfs rw nfsroot=$rootpath " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \
|
|
"bootm"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs root=/dev/mtdblock2 rw mtdparts=phys:1280K(ROM)ro,-(root) "\
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \
|
|
"bootm fe080000"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_ECHO
|
|
#define CONFIG_CMD_IMMAP
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_MII
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=>" /* Monitor Command Prompt */
|
|
#define CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_LOAD_ADDR 0x00100000
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
#define CFG_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 }
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Internal Memory Mapped Register
|
|
*/
|
|
#define CFG_IMMR 0xF0000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
#define CFG_INIT_RAM_ADDR CFG_IMMR
|
|
#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
|
|
#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
|
|
|
|
#ifdef CONFIG_BZIP2
|
|
#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
|
|
#else
|
|
#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
|
|
#endif /* CONFIG_BZIP2 */
|
|
|
|
#define CFG_ALLOC_DPRAM 1 /* use allocation routines */
|
|
|
|
/*
|
|
* Flash
|
|
*/
|
|
/*-----------------------------------------------------------------------
|
|
* Flash organisation
|
|
*/
|
|
#define CFG_FLASH_BASE 0xFE000000
|
|
#define CFG_FLASH_CFI /* The flash is CFI compatible */
|
|
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
|
|
#define CFG_MAX_FLASH_SECT 128 /* Max num of sects on one chip */
|
|
|
|
/* Environment is in flash */
|
|
#define CFG_ENV_IS_IN_FLASH
|
|
#define CFG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */
|
|
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
|
|
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
|
|
|
|
#ifdef CONFIG_CMD_DATE
|
|
# define CONFIG_RTC_DS3231
|
|
# define CFG_I2C_RTC_ADDR 0x68
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C configuration
|
|
*/
|
|
#if defined(CONFIG_CMD_I2C)
|
|
/* enable I2C and select the hardware/software driver */
|
|
#undef CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
|
|
|
|
#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */
|
|
#define CFG_I2C_SLAVE 0xFE
|
|
|
|
#ifdef CONFIG_SOFT_I2C
|
|
/*
|
|
* Software (bit-bang) I2C driver configuration
|
|
*/
|
|
#define PB_SCL 0x00000020 /* PB 26 */
|
|
#define PB_SDA 0x00000010 /* PB 27 */
|
|
|
|
#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
|
|
#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
|
|
#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
|
|
#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
|
|
#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
|
|
else immr->im_cpm.cp_pbdat &= ~PB_SDA
|
|
#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
|
|
else immr->im_cpm.cp_pbdat &= ~PB_SCL
|
|
#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
|
|
#endif /* CONFIG_SOFT_I2C */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SYPCR - System Protection Control 11-9
|
|
* SYPCR can only be written once after reset!
|
|
*-----------------------------------------------------------------------
|
|
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
|
|
*/
|
|
#if defined(CONFIG_WATCHDOG)
|
|
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
|
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
|
#else
|
|
#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SIUMCR - SIU Module Configuration 11-6
|
|
*-----------------------------------------------------------------------
|
|
* PCMCIA config., multi-function pin tri-state
|
|
*/
|
|
#define CFG_SIUMCR (SIUMCR_FRC)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* TBSCR - Time Base Status and Control 11-26
|
|
*-----------------------------------------------------------------------
|
|
* Clear Reference Interrupt Status, Timebase freezing enabled
|
|
*/
|
|
#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PISCR - Periodic Interrupt Status and Control 11-31
|
|
*-----------------------------------------------------------------------
|
|
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
|
*/
|
|
#define CFG_PISCR (PISCR_PS | PISCR_PITF)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SCCR - System Clock and reset Control Register 15-27
|
|
*-----------------------------------------------------------------------
|
|
* Set clock output, timebase and RTC source and divider,
|
|
* power management and some other internal clocks
|
|
*/
|
|
#define SCCR_MASK SCCR_EBDF11
|
|
/* #define CFG_SCCR SCCR_TBS */
|
|
#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
|
|
SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
|
|
SCCR_DFALCD00)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* DER - Debug Enable Register
|
|
*-----------------------------------------------------------------------
|
|
* Set to zero to prevent the processor from entering debug mode
|
|
*/
|
|
#define CFG_DER 0
|
|
|
|
|
|
/* Because of the way the 860 starts up and assigns CS0 the entire
|
|
* address space, we have to set the memory controller differently.
|
|
* Normally, you write the option register first, and then enable the
|
|
* chip select by writing the base register. For CS0, you must write
|
|
* the base register first, followed by the option register.
|
|
*/
|
|
|
|
|
|
/*
|
|
* Init Memory Controller:
|
|
*/
|
|
|
|
/* BR0 and OR0 (FLASH) */
|
|
#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
|
|
|
|
|
|
/* used to re-map FLASH both when starting from SRAM or FLASH:
|
|
* restrict access enough to keep SRAM working (if any)
|
|
* but not too much to meddle with FLASH accesses
|
|
*/
|
|
#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
|
|
#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
|
|
|
|
/*
|
|
* FLASH timing:
|
|
*/
|
|
#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
|
|
OR_SCY_6_CLK | OR_EHTR | OR_BI)
|
|
|
|
#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
|
|
#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
|
|
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
|
|
|
|
|
|
/*
|
|
* SDRAM CS1 UPMB
|
|
*/
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_SDRAM_BASE_PRELIM CFG_SDRAM_BASE
|
|
#define SDRAM_MAX_SIZE 0x4000000 /* max 64 MB */
|
|
|
|
#define CFG_PRELIM_OR1_AM 0xF0000000
|
|
/* #define CFG_OR1_TIMING OR_CSNT_SAM/\* | OR_G5LS /\\* *\\/ *\/ */
|
|
#define SDRAM_TIMING OR_SCY_0_CLK /* SDRAM-Timing */
|
|
|
|
#define CFG_OR1_PRELIM (CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING)
|
|
#define CFG_BR1_PRELIM ((CFG_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V)
|
|
|
|
/* #define CFG_OR1_FINAL ((CFG_OR1_AM & OR_AM_MSK) | CFG_OR1_TIMING) */
|
|
/* #define CFG_BR1_FINAL ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */
|
|
|
|
#define CFG_PTB_PER_CLK ((4096 * 16 * 1000) / (4 * 64))
|
|
#define CFG_PTA_PER_CLK 195
|
|
#define CFG_MBMR_PTB 195
|
|
#define CFG_MPTPR MPTPR_PTP_DIV16
|
|
#define CFG_MAR 0x88
|
|
|
|
#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
|
|
MBMR_AMB_TYPE_0 | \
|
|
MBMR_G0CLB_A10 | \
|
|
MBMR_DSB_1_CYCL | \
|
|
MBMR_RLFB_1X | \
|
|
MBMR_WLFB_1X | \
|
|
MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
|
|
|
|
#define CFG_MBMR_9COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
|
|
MBMR_AMB_TYPE_1 | \
|
|
MBMR_G0CLB_A10 | \
|
|
MBMR_DSB_1_CYCL | \
|
|
MBMR_RLFB_1X | \
|
|
MBMR_WLFB_1X | \
|
|
MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
|
|
|
|
|
|
/*
|
|
* DSP Host Port Interface CS3
|
|
*/
|
|
#define CFG_SPC1920_HPI_BASE 0x90000000
|
|
#define CFG_PRELIM_OR3_AM 0xF8000000
|
|
|
|
#define CFG_OR3 (CFG_PRELIM_OR3_AM | \
|
|
OR_G5LS | \
|
|
OR_SCY_0_CLK | \
|
|
OR_BI)
|
|
|
|
#define CFG_BR3 ((CFG_SPC1920_HPI_BASE & BR_BA_MSK) | \
|
|
BR_MS_UPMA | \
|
|
BR_PS_16 | \
|
|
BR_V);
|
|
|
|
#define CFG_MAMR (MAMR_GPL_A4DIS | \
|
|
MAMR_RLFA_5X | \
|
|
MAMR_WLFA_5X)
|
|
|
|
#define CONFIG_SPC1920_HPI_TEST
|
|
|
|
#ifdef CONFIG_SPC1920_HPI_TEST
|
|
#define HPI_REG(x) (*((volatile u16 *) (CFG_SPC1920_HPI_BASE + x)))
|
|
#define HPI_HPIC_1 HPI_REG(0)
|
|
#define HPI_HPIC_2 HPI_REG(2)
|
|
#define HPI_HPIA_1 HPI_REG(0x2000008)
|
|
#define HPI_HPIA_2 HPI_REG(0x2000008 + 2)
|
|
#define HPI_HPID_INC_1 HPI_REG(0x1000004)
|
|
#define HPI_HPID_INC_2 HPI_REG(0x1000004 + 2)
|
|
#define HPI_HPID_NOINC_1 HPI_REG(0x300000c)
|
|
#define HPI_HPID_NOINC_2 HPI_REG(0x300000c + 2)
|
|
#endif /* CONFIG_SPC1920_HPI_TEST */
|
|
|
|
/*
|
|
* Ramtron FM18L08 FRAM 32KB on CS4
|
|
*/
|
|
#define CFG_SPC1920_FRAM_BASE 0x80100000
|
|
#define CFG_PRELIM_OR4_AM 0xffff8000
|
|
#define CFG_OR4 (CFG_PRELIM_OR4_AM | \
|
|
OR_ACS_DIV2 | \
|
|
OR_BI | \
|
|
OR_SCY_4_CLK | \
|
|
OR_TRLX)
|
|
|
|
#define CFG_BR4 ((CFG_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
|
|
|
|
/*
|
|
* PLD CS5
|
|
*/
|
|
#define CFG_SPC1920_PLD_BASE 0x80000000
|
|
#define CFG_PRELIM_OR5_AM 0xffff8000
|
|
|
|
#define CFG_OR5_PRELIM (CFG_PRELIM_OR5_AM | \
|
|
OR_CSNT_SAM | \
|
|
OR_ACS_DIV1 | \
|
|
OR_BI | \
|
|
OR_SCY_0_CLK | \
|
|
OR_TRLX)
|
|
|
|
#define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#endif /* __CONFIG_H */
|