mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 16:08:53 +09:00
![Stoica Cosmin-Stefan](/assets/img/avatar_default.png)
The Linflex module is integrated on some NXP automotive SoCs part of the former Freescale portfolio, like S32V234, an SoC for Advanced Driver Assistance Systems. Original-signed-off-by: Stoica Cosmin-Stefan <cosminstefan.stoica@freescale.com> Original-signed-off-by: Chircu Bogdan <Bogdan.Chircu@freescale.com> Original-signed-off-by: Depons Eric <eric.depons@freescale.com> Original-signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com> Signed-off-by: Eddy Petrișor <eddy.petrisor@gmail.com>
224 lines
5.3 KiB
C
224 lines
5.3 KiB
C
/*
|
|
* (C) Copyright 2013-2016 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <serial.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
#define US1_TDRE (1 << 7)
|
|
#define US1_RDRF (1 << 5)
|
|
#define UC2_TE (1 << 3)
|
|
#define LINCR1_INIT (1 << 0)
|
|
#define LINCR1_MME (1 << 4)
|
|
#define LINCR1_BF (1 << 7)
|
|
#define LINSR_LINS_INITMODE (0x00001000)
|
|
#define LINSR_LINS_MASK (0x0000F000)
|
|
#define UARTCR_UART (1 << 0)
|
|
#define UARTCR_WL0 (1 << 1)
|
|
#define UARTCR_PCE (1 << 2)
|
|
#define UARTCR_PC0 (1 << 3)
|
|
#define UARTCR_TXEN (1 << 4)
|
|
#define UARTCR_RXEN (1 << 5)
|
|
#define UARTCR_PC1 (1 << 6)
|
|
#define UARTSR_DTF (1 << 1)
|
|
#define UARTSR_DRF (1 << 2)
|
|
#define UARTSR_RMB (1 << 9)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef CONFIG_DM_SERIAL
|
|
#error "The linflex serial driver does not have non-DM support."
|
|
#endif
|
|
|
|
static void _linflex_serial_setbrg(struct linflex_fsl *base, int baudrate)
|
|
{
|
|
u32 clk = mxc_get_clock(MXC_UART_CLK);
|
|
u32 ibr, fbr;
|
|
|
|
if (!baudrate)
|
|
baudrate = CONFIG_BAUDRATE;
|
|
|
|
ibr = (u32) (clk / (16 * gd->baudrate));
|
|
fbr = (u32) (clk % (16 * gd->baudrate)) * 16;
|
|
|
|
__raw_writel(ibr, &base->linibrr);
|
|
__raw_writel(fbr, &base->linfbrr);
|
|
}
|
|
|
|
static int _linflex_serial_getc(struct linflex_fsl *base)
|
|
{
|
|
char c;
|
|
|
|
if (!(__raw_readb(&base->uartsr) & UARTSR_DRF))
|
|
return -EAGAIN;
|
|
|
|
if (!(__raw_readl(&base->uartsr) & UARTSR_RMB))
|
|
return -EAGAIN;
|
|
|
|
c = __raw_readl(&base->bdrm);
|
|
__raw_writeb((__raw_readb(&base->uartsr) | (UARTSR_DRF | UARTSR_RMB)),
|
|
&base->uartsr);
|
|
return c;
|
|
}
|
|
|
|
static int _linflex_serial_putc(struct linflex_fsl *base, const char c)
|
|
{
|
|
__raw_writeb(c, &base->bdrl);
|
|
|
|
|
|
if (!(__raw_readb(&base->uartsr) & UARTSR_DTF))
|
|
return -EAGAIN;
|
|
|
|
__raw_writeb((__raw_readb(&base->uartsr) | UARTSR_DTF), &base->uartsr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialise the serial port with the given baudrate. The settings
|
|
* are always 8 data bits, no parity, 1 stop bit, no start bits.
|
|
*/
|
|
static int _linflex_serial_init(struct linflex_fsl *base)
|
|
{
|
|
volatile u32 ctrl;
|
|
|
|
/* set the Linflex in master mode amd activate by-pass filter */
|
|
ctrl = LINCR1_BF | LINCR1_MME;
|
|
__raw_writel(ctrl, &base->lincr1);
|
|
|
|
/* init mode */
|
|
ctrl |= LINCR1_INIT;
|
|
__raw_writel(ctrl, &base->lincr1);
|
|
|
|
/* waiting for init mode entry - TODO: add a timeout */
|
|
while ((__raw_readl(&base->linsr) & LINSR_LINS_MASK) !=
|
|
LINSR_LINS_INITMODE);
|
|
|
|
/* set UART bit to allow writing other bits */
|
|
__raw_writel(UARTCR_UART, &base->uartcr);
|
|
|
|
/* provide data bits, parity, stop bit, etc */
|
|
serial_setbrg();
|
|
|
|
/* 8 bit data, no parity, Tx and Rx enabled, UART mode */
|
|
__raw_writel(UARTCR_PC1 | UARTCR_RXEN | UARTCR_TXEN | UARTCR_PC0
|
|
| UARTCR_WL0 | UARTCR_UART, &base->uartcr);
|
|
|
|
ctrl = __raw_readl(&base->lincr1);
|
|
ctrl &= ~LINCR1_INIT;
|
|
__raw_writel(ctrl, &base->lincr1); /* end init mode */
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct linflex_serial_platdata {
|
|
struct linflex_fsl *base_addr;
|
|
u8 port_id; /* do we need this? */
|
|
};
|
|
|
|
struct linflex_serial_priv {
|
|
struct linflex_fsl *lfuart;
|
|
};
|
|
|
|
int linflex_serial_setbrg(struct udevice *dev, int baudrate)
|
|
{
|
|
struct linflex_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
_linflex_serial_setbrg(priv->lfuart, baudrate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int linflex_serial_getc(struct udevice *dev)
|
|
{
|
|
struct linflex_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
return _linflex_serial_getc(priv->lfuart);
|
|
}
|
|
|
|
static int linflex_serial_putc(struct udevice *dev, const char ch)
|
|
{
|
|
|
|
struct linflex_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
return _linflex_serial_putc(priv->lfuart, ch);
|
|
}
|
|
|
|
static int linflex_serial_pending(struct udevice *dev, bool input)
|
|
{
|
|
struct linflex_serial_priv *priv = dev_get_priv(dev);
|
|
uint32_t uartsr = __raw_readl(&priv->lfuart->uartsr);
|
|
|
|
if (input)
|
|
return ((uartsr & UARTSR_DRF) && (uartsr & UARTSR_RMB)) ? 1 : 0;
|
|
else
|
|
return uartsr & UARTSR_DTF ? 0 : 1;
|
|
}
|
|
|
|
static void linflex_serial_init_internal(struct linflex_fsl *lfuart)
|
|
{
|
|
_linflex_serial_init(lfuart);
|
|
_linflex_serial_setbrg(lfuart, CONFIG_BAUDRATE);
|
|
return;
|
|
}
|
|
|
|
static int linflex_serial_probe(struct udevice *dev)
|
|
{
|
|
struct linflex_serial_platdata *plat = dev->platdata;
|
|
struct linflex_serial_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->lfuart = (struct linflex_fsl *)plat->base_addr;
|
|
linflex_serial_init_internal(priv->lfuart);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_serial_ops linflex_serial_ops = {
|
|
.putc = linflex_serial_putc,
|
|
.pending = linflex_serial_pending,
|
|
.getc = linflex_serial_getc,
|
|
.setbrg = linflex_serial_setbrg,
|
|
};
|
|
|
|
U_BOOT_DRIVER(serial_linflex) = {
|
|
.name = "serial_linflex",
|
|
.id = UCLASS_SERIAL,
|
|
.probe = linflex_serial_probe,
|
|
.ops = &linflex_serial_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
.priv_auto_alloc_size = sizeof(struct linflex_serial_priv),
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_UART_LINFLEXUART
|
|
|
|
#include <debug_uart.h>
|
|
|
|
|
|
static inline void _debug_uart_init(void)
|
|
{
|
|
struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
linflex_serial_init_internal(base);
|
|
}
|
|
|
|
static inline void _debug_uart_putc(int ch)
|
|
{
|
|
struct linflex_fsl *base = (struct linflex_fsl *)CONFIG_DEBUG_UART_BASE;
|
|
|
|
/* XXX: Is this OK? Should this use the non-DM version? */
|
|
_linflex_serial_putc(base, ch);
|
|
}
|
|
|
|
DEBUG_UART_FUNCS
|
|
|
|
#endif /* CONFIG_DEBUG_UART_LINFLEXUART */
|