mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-28 13:53:44 +09:00
12ffe75819
Modify dts files to add 'no-1-8-v' property for all the ZynqMP boards. User can remove this property to enable the UHS mode. This is to keep the same speed (HS) modes across all the stages of the Linux Boot. Due to power cycling limitation of some of the ZynqMP boards, some SD cards don't get power cycled and are failing in Linux. Signed-off-by: Manish Narani <manish.narani@xilinx.com>
597 lines
12 KiB
Plaintext
597 lines
12 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* dts file for Xilinx ZynqMP ZCU111
|
|
*
|
|
* (C) Copyright 2017 - 2020, Xilinx, Inc.
|
|
*
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "zynqmp.dtsi"
|
|
#include "zynqmp-clk-ccf.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
/ {
|
|
model = "ZynqMP ZCU111 RevA";
|
|
compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp";
|
|
|
|
aliases {
|
|
ethernet0 = &gem3;
|
|
gpio0 = &gpio;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
mmc0 = &sdhci1;
|
|
rtc0 = &rtc;
|
|
serial0 = &uart0;
|
|
serial1 = &dcc;
|
|
spi0 = &qspi;
|
|
usb0 = &usb0;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
xlnx,eeprom = &eeprom;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
|
|
/* Another 4GB connected to PL */
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
autorepeat;
|
|
sw19 {
|
|
label = "sw19";
|
|
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_DOWN>;
|
|
wakeup-source;
|
|
autorepeat;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
heartbeat-led {
|
|
label = "heartbeat";
|
|
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
ina226-u67 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>;
|
|
};
|
|
ina226-u59 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>;
|
|
};
|
|
ina226-u61 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>;
|
|
};
|
|
ina226-u60 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>;
|
|
};
|
|
ina226-u64 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>;
|
|
};
|
|
ina226-u69 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>;
|
|
};
|
|
ina226-u66 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>;
|
|
};
|
|
ina226-u65 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
|
|
};
|
|
ina226-u63 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>;
|
|
};
|
|
ina226-u3 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>;
|
|
};
|
|
ina226-u71 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>;
|
|
};
|
|
ina226-u77 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
|
|
};
|
|
ina226-u73 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>;
|
|
};
|
|
ina226-u79 {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
|
|
};
|
|
};
|
|
|
|
&dcc {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan6 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan7 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan8 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gem3 {
|
|
status = "okay";
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
phy0: ethernet-phy@c {
|
|
reg = <0xc>;
|
|
ti,rx-internal-delay = <0x8>;
|
|
ti,tx-internal-delay = <0xa>;
|
|
ti,fifo-depth = <0x1>;
|
|
ti,dp83867-rxctrl-strap-quirk;
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpu {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tca6416_u22: gpio@20 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x20>;
|
|
gpio-controller; /* interrupt not connected */
|
|
#gpio-cells = <2>;
|
|
/*
|
|
* IRQ not connected
|
|
* Lines:
|
|
* 0 - MAX6643_OT_B
|
|
* 1 - MAX6643_FANFAIL_B
|
|
* 2 - MIO26_PMU_INPUT_LS
|
|
* 4 - SFP_SI5382_INT_ALM
|
|
* 5 - IIC_MUX_RESET_B
|
|
* 6 - GEM3_EXP_RESET_B
|
|
* 10 - FMCP_HSPC_PRSNT_M2C_B
|
|
* 11 - CLK_SPI_MUX_SEL0
|
|
* 12 - CLK_SPI_MUX_SEL1
|
|
* 16 - IRPS5401_ALERT_B
|
|
* 17 - INA226_PMBUS_ALERT
|
|
* 3, 7, 13-15 - not connected
|
|
*/
|
|
};
|
|
|
|
i2c-mux@75 { /* u23 */
|
|
compatible = "nxp,pca9544";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x75>;
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
/* PS_PMBUS */
|
|
/* PMBUS_ALERT done via pca9544 */
|
|
u67: ina226@40 { /* u67 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u67";
|
|
reg = <0x40>;
|
|
shunt-resistor = <2000>;
|
|
};
|
|
u59: ina226@41 { /* u59 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u59";
|
|
reg = <0x41>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u61: ina226@42 { /* u61 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u61";
|
|
reg = <0x42>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u60: ina226@43 { /* u60 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u60";
|
|
reg = <0x43>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u64: ina226@45 { /* u64 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u64";
|
|
reg = <0x45>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u69: ina226@46 { /* u69 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u69";
|
|
reg = <0x46>;
|
|
shunt-resistor = <2000>;
|
|
};
|
|
u66: ina226@47 { /* u66 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u66";
|
|
reg = <0x47>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u65: ina226@48 { /* u65 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u65";
|
|
reg = <0x48>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u63: ina226@49 { /* u63 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u63";
|
|
reg = <0x49>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u3: ina226@4a { /* u3 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u3";
|
|
reg = <0x4a>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u71: ina226@4b { /* u71 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u71";
|
|
reg = <0x4b>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u77: ina226@4c { /* u77 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u77";
|
|
reg = <0x4c>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u73: ina226@4d { /* u73 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u73";
|
|
reg = <0x4d>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
u79: ina226@4e { /* u79 */
|
|
compatible = "ti,ina226";
|
|
#io-channel-cells = <1>;
|
|
label = "ina226-u79";
|
|
reg = <0x4e>;
|
|
shunt-resistor = <5000>;
|
|
};
|
|
};
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
/* NC */
|
|
};
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */
|
|
#clock-cells = <0>;
|
|
compatible = "infineon,irps5401";
|
|
reg = <0x43>;
|
|
};
|
|
irps5401_44: irps54012@44 { /* IRPS5401 - u55 */
|
|
#clock-cells = <0>;
|
|
compatible = "infineon,irps5401";
|
|
reg = <0x44>;
|
|
};
|
|
irps5401_45: irps54012@45 { /* IRPS5401 - u57 */
|
|
#clock-cells = <0>;
|
|
compatible = "infineon,irps5401";
|
|
reg = <0x45>;
|
|
};
|
|
/* u68 IR38064 +0 */
|
|
/* u70 IR38060 +1 */
|
|
/* u74 IR38060 +2 */
|
|
/* u75 IR38060 +6 */
|
|
/* J19 header too */
|
|
|
|
};
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
/* SYSMON */
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
i2c-mux@74 { /* u26 */
|
|
compatible = "nxp,pca9548";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x74>;
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
/*
|
|
* IIC_EEPROM 1kB memory which uses 256B blocks
|
|
* where every block has different address.
|
|
* 0 - 256B address 0x54
|
|
* 256B - 512B address 0x55
|
|
* 512B - 768B address 0x56
|
|
* 768B - 1024B address 0x57
|
|
*/
|
|
eeprom: eeprom@54 { /* u88 */
|
|
compatible = "atmel,24c08";
|
|
reg = <0x54>;
|
|
};
|
|
};
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
si5341: clock-generator@36 { /* SI5341 - u46 */
|
|
compatible = "si5341";
|
|
reg = <0x36>;
|
|
};
|
|
|
|
};
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
si570_1: clock-generator@5d { /* USER SI570 - u47 */
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
reg = <0x5d>;
|
|
temperature-stability = <50>;
|
|
factory-fout = <300000000>;
|
|
clock-frequency = <300000000>;
|
|
clock-output-names = "si570_user";
|
|
};
|
|
};
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */
|
|
#clock-cells = <0>;
|
|
compatible = "silabs,si570";
|
|
reg = <0x5d>;
|
|
temperature-stability = <50>;
|
|
factory-fout = <156250000>;
|
|
clock-frequency = <156250000>;
|
|
clock-output-names = "si570_mgt";
|
|
};
|
|
};
|
|
i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
si5328: clock-generator@69 { /* SI5328 - u48 */
|
|
compatible = "silabs,si5328";
|
|
reg = <0x69>;
|
|
};
|
|
};
|
|
i2c@5 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
sc18is603@2f { /* sc18is602 - u93 */
|
|
compatible = "nxp,sc18is603";
|
|
reg = <0x2f>;
|
|
/* 4 gpios for CS not handled by driver */
|
|
/*
|
|
* USB2ANY cable or
|
|
* LMK04208 - u90 or
|
|
* LMX2594 - u102 or
|
|
* LMX2594 - u103 or
|
|
* LMX2594 - u104
|
|
*/
|
|
};
|
|
};
|
|
i2c@6 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <6>;
|
|
/* FMC connector */
|
|
};
|
|
/* 7 NC */
|
|
};
|
|
|
|
i2c-mux@75 {
|
|
compatible = "nxp,pca9548"; /* u27 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x75>;
|
|
|
|
i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
/* FMCP_HSPC_IIC */
|
|
};
|
|
i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
/* NC */
|
|
};
|
|
i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
/* SYSMON */
|
|
};
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
/* DDR4 SODIMM */
|
|
};
|
|
i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
/* SFP3 */
|
|
};
|
|
i2c@5 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
/* SFP2 */
|
|
};
|
|
i2c@6 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <6>;
|
|
/* SFP1 */
|
|
};
|
|
i2c@7 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <7>;
|
|
/* SFP0 */
|
|
};
|
|
};
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
is-dual = <1>;
|
|
flash@0 {
|
|
compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>; /* FIXME also DUAL configuration possible */
|
|
spi-max-frequency = <108000000>; /* Based on DC1 spec */
|
|
partition@qspi-fsbl-uboot { /* for testing purpose */
|
|
label = "qspi-fsbl-uboot";
|
|
reg = <0x0 0x100000>;
|
|
};
|
|
partition@qspi-linux { /* for testing purpose */
|
|
label = "qspi-linux";
|
|
reg = <0x100000 0x500000>;
|
|
};
|
|
partition@qspi-device-tree { /* for testing purpose */
|
|
label = "qspi-device-tree";
|
|
reg = <0x600000 0x20000>;
|
|
};
|
|
partition@qspi-rootfs { /* for testing purpose */
|
|
label = "qspi-rootfs";
|
|
reg = <0x620000 0x5E0000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&sata {
|
|
status = "okay";
|
|
/* SATA OOB timing settings */
|
|
ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
|
|
ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
|
|
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
|
|
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
|
|
ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
|
|
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
|
|
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
|
|
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
|
|
phy-names = "sata-phy";
|
|
phys = <&lane3 PHY_TYPE_SATA 1 3 125000000>;
|
|
};
|
|
|
|
/* SD1 with level shifter */
|
|
&sdhci1 {
|
|
status = "okay";
|
|
disable-wp;
|
|
/*
|
|
* This property should be removed for supporting UHS mode
|
|
*/
|
|
no-1-8-v;
|
|
xlnx,mio_bank = <1>;
|
|
};
|
|
|
|
&serdes {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* ULPI SMSC USB3320 */
|
|
&usb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&dwc3_0 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
snps,usb3_lpm_capable;
|
|
phy-names = "usb3-phy";
|
|
phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
|
|
};
|