mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-09 06:13:21 +09:00
cfa460adfd
A lot changed in the Linux MTD code, since it was last ported from Linux to U-Boot. This patch takes U-Boot NAND support to the level of Linux 2.6.22.1 and will enable support for very large NAND devices (4KB pages) and ease the compatibility between U-Boot and Linux filesystems. This patch is tested on two custom boards with PPC and ARM processors running YAFFS in U-Boot and Linux using gcc-4.1.2 cross compilers. MAKEALL ppc/arm has some issues: * DOC/OneNand/nand_spl is not building (I have not tried porting these parts, and since I do not have any HW and I am not familiar with this code/HW I think its best left to someone else.) Except for the issues mentioned above, I have ported all drivers necessary to run MAKEALL ppc/arm without errors and warnings. Many drivers were trivial to port, but some were not so trivial. The following drivers must be examined carefully and maybe rewritten to some degree: cpu/ppc4xx/ndfc.c cpu/arm926ejs/davinci/nand.c board/delta/nand.c board/zylonite/nand.c Signed-off-by: William Juul <william.juul@tandberg.com> Signed-off-by: Stig Olsen <stig.olsen@tandberg.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
105 lines
2.7 KiB
C
105 lines
2.7 KiB
C
/*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/immap.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_CMD_NAND)
|
|
#include <nand.h>
|
|
#include <linux/mtd/mtd.h>
|
|
|
|
#define SET_CLE 0x10
|
|
#define CLR_CLE ~SET_CLE
|
|
#define SET_ALE 0x08
|
|
#define CLR_ALE ~SET_ALE
|
|
|
|
static void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtdinfo->priv;
|
|
/* volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; TODO: handle wp */
|
|
u32 nand_baseaddr = (u32) this->IO_ADDR_W;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
if ( ctrl & NAND_CLE )
|
|
nand_baseaddr |= SET_CLE;
|
|
else
|
|
nand_baseaddr &= CLR_CLE;
|
|
if ( ctrl & NAND_ALE )
|
|
nand_baseaddr |= SET_ALE;
|
|
else
|
|
nand_baseaddr &= CLR_ALE;
|
|
}
|
|
this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
|
|
|
|
if (cmd != NAND_CMD_NONE)
|
|
writeb(cmd, this->IO_ADDR_W);
|
|
}
|
|
|
|
static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
|
|
{
|
|
struct nand_chip *this = mtdinfo->priv;
|
|
*((volatile u8 *)(this->IO_ADDR_W)) = byte;
|
|
}
|
|
|
|
static u8 nand_read_byte(struct mtd_info *mtdinfo)
|
|
{
|
|
struct nand_chip *this = mtdinfo->priv;
|
|
return (u8) (*((volatile u8 *)this->IO_ADDR_R));
|
|
}
|
|
|
|
static int nand_dev_ready(struct mtd_info *mtdinfo)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
|
|
|
|
*((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
|
|
|
|
/* set up pin configuration */
|
|
gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
|
|
gpio->pddr_timer |= 0x08;
|
|
gpio->ppd_timer |= 0x08;
|
|
gpio->pclrr_timer = 0;
|
|
gpio->podr_timer = 0;
|
|
|
|
nand->chip_delay = 50;
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
nand->cmd_ctrl = nand_hwcontrol;
|
|
nand->read_byte = nand_read_byte;
|
|
nand->write_byte = nand_write_byte;
|
|
nand->dev_ready = nand_dev_ready;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|