u-boot-brain/arch/arm/include/asm/arch-omap3
Axel Lin 87bd05d78f ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5
The omap_gpio driver is used by AM33XX, OMAP3/4, OMAP54XX and DRA7XX SoCs.
These SoCs have different gpio count but currently omap_gpio driver uses hard
coded 192 which is wrong.

This patch fixes this issue by:
1. Move define of OMAP_MAX_GPIO to all arch/arm/include/asm/arch-omap*/gpio.h.
2. Update gpio bank settings and enable GPIO modules 7 & 8 clocks for OMAP5.

Thanks for Lubomir Popov to provide valuable comments to fix this issue.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Lubomir Popov <lpopov@mm-sol.com>
Acked-by: Heiko Schocher <hs@denx.de>
2013-07-02 09:21:16 -04:00
..
am35x_def.h OMAP3: am35x_def.h: add USB defines 2012-11-20 00:16:07 +01:00
clock.h ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.h 2013-06-10 08:43:09 -04:00
clocks_omap3.h AM3517: Changed default clock rate for AM3517 2012-02-12 10:11:31 +01:00
cpu.h omap3/cpu.h: add BCH support 2013-04-08 11:29:05 -04:00
dma.h omap3: Add interface for omap3 DMA 2011-10-27 21:56:34 +02:00
dss.h omap3: allow dynamic selection of gfx_format 2013-03-08 16:41:13 -05:00
ehci.h ehci-omap: Clean up added ehci-omap.c 2012-02-12 10:11:31 +01:00
emac_defs.h AM35xx: add EMAC support 2011-12-06 23:59:36 +01:00
emif4.h AM35x: Add support for EMIF4 2010-06-08 10:07:19 -05:00
gpio.h ARM: OMAP: GPIO: Fix valid range and enable usage of all GPIOs on OMAP5 2013-07-02 09:21:16 -04:00
i2c.h ARMV7: Modify i2c driver for more reliable operation on OMAP4 2010-08-05 10:11:24 -04:00
mem.h OMAP3: mem: Add Numonyx OneNAND 200MHz timing information 2012-09-01 14:58:11 +02:00
mmc_host_def.h omap: consolidate common mmc definitions 2013-03-08 16:41:12 -05:00
musb.h OMAP3: am35x: add musb functions 2012-11-20 00:16:07 +01:00
mux.h OMAP3: add definition of CTRL_WKUP_CTRL register 2012-09-04 17:05:38 -07:00
omap3-regs.h ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions 2011-04-27 19:38:09 +02:00
omap3.h OMAP3+: introduce generic ABB support 2013-06-10 08:43:09 -04:00
omap_gpmc.h omap3/omap_gpmc.h: add ooblayout for BCH8 as in kernel 2013-04-08 11:29:05 -04:00
spl.h OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMC 2013-04-08 11:29:34 -04:00
sys_proto.h omap_gpmc: change nandecc command 2013-04-08 11:29:05 -04:00