mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
1271 lines
31 KiB
C
1271 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2011-2012 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <env.h>
|
|
#include <i2c.h>
|
|
#include <init.h>
|
|
#include <irq_func.h>
|
|
#include <netdev.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <fm_eth.h>
|
|
#include <hwconfig.h>
|
|
|
|
#include "../common/qixis.h"
|
|
#include "../common/vsc3316_3308.h"
|
|
#include "../common/idt8t49n222a_serdes_clk.h"
|
|
#include "../common/zm7300.h"
|
|
#include "b4860qds.h"
|
|
#include "b4860qds_qixis.h"
|
|
#include "b4860qds_crossbar_con.h"
|
|
|
|
#define CLK_MUX_SEL_MASK 0x4
|
|
#define ETH_PHY_CLK_OUT 0x4
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
u8 sw;
|
|
struct cpu_type *cpu = gd->arch.cpu;
|
|
static const char *const freq[] = {"100", "125", "156.25", "161.13",
|
|
"122.88", "122.88", "122.88"};
|
|
int clock;
|
|
|
|
printf("Board: %sQDS, ", cpu->name);
|
|
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
|
|
QIXIS_READ(id), QIXIS_READ(arch));
|
|
|
|
sw = QIXIS_READ(brdcfg[0]);
|
|
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw >= 0x8 && sw <= 0xE)
|
|
puts("NAND\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
|
|
|
printf("FPGA: v%d (%s), build %d",
|
|
(int)QIXIS_READ(scver), qixis_read_tag(buf),
|
|
(int)qixis_read_minor());
|
|
/* the timestamp string contains "\n" at the end */
|
|
printf(" on %s", qixis_read_time(buf));
|
|
|
|
/*
|
|
* Display the actual SERDES reference clocks as configured by the
|
|
* dip switches on the board. Note that the SWx registers could
|
|
* technically be set to force the reference clocks to match the
|
|
* values that the SERDES expects (or vice versa). For now, however,
|
|
* we just display both values and hope the user notices when they
|
|
* don't match.
|
|
*/
|
|
puts("SERDES Reference Clocks: ");
|
|
sw = QIXIS_READ(brdcfg[2]);
|
|
clock = (sw >> 5) & 7;
|
|
printf("Bank1=%sMHz ", freq[clock]);
|
|
sw = QIXIS_READ(brdcfg[4]);
|
|
clock = (sw >> 6) & 3;
|
|
printf("Bank2=%sMHz\n", freq[clock]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int select_i2c_ch_pca(u8 ch)
|
|
{
|
|
int ret;
|
|
|
|
/* Selecting proper channel via PCA*/
|
|
ret = i2c_write(I2C_MUX_PCA_ADDR, 0x0, 1, &ch, 1);
|
|
if (ret) {
|
|
printf("PCA: failed to select proper channel.\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* read_voltage from sensor on I2C bus
|
|
* We use average of 4 readings, waiting for 532us befor another reading
|
|
*/
|
|
#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */
|
|
#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */
|
|
|
|
static inline int read_voltage(void)
|
|
{
|
|
int i, ret, voltage_read = 0;
|
|
u16 vol_mon;
|
|
|
|
for (i = 0; i < NUM_READINGS; i++) {
|
|
ret = i2c_read(I2C_VOL_MONITOR_ADDR,
|
|
I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2);
|
|
if (ret) {
|
|
printf("VID: failed to read core voltage\n");
|
|
return ret;
|
|
}
|
|
if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
|
|
printf("VID: Core voltage sensor error\n");
|
|
return -1;
|
|
}
|
|
debug("VID: bus voltage reads 0x%04x\n", vol_mon);
|
|
/* LSB = 4mv */
|
|
voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
|
|
udelay(WAIT_FOR_ADC);
|
|
}
|
|
/* calculate the average */
|
|
voltage_read /= NUM_READINGS;
|
|
|
|
return voltage_read;
|
|
}
|
|
|
|
static int adjust_vdd(ulong vdd_override)
|
|
{
|
|
int re_enable = disable_interrupts();
|
|
ccsr_gur_t __iomem *gur =
|
|
(void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 fusesr;
|
|
u8 vid;
|
|
int vdd_target, vdd_last;
|
|
int existing_voltage, temp_voltage, voltage; /* all in 1/10 mV */
|
|
int ret;
|
|
unsigned int orig_i2c_speed;
|
|
unsigned long vdd_string_override;
|
|
char *vdd_string;
|
|
static const uint16_t vdd[32] = {
|
|
0, /* unused */
|
|
9875, /* 0.9875V */
|
|
9750,
|
|
9625,
|
|
9500,
|
|
9375,
|
|
9250,
|
|
9125,
|
|
9000,
|
|
8875,
|
|
8750,
|
|
8625,
|
|
8500,
|
|
8375,
|
|
8250,
|
|
8125,
|
|
10000, /* 1.0000V */
|
|
10125,
|
|
10250,
|
|
10375,
|
|
10500,
|
|
10625,
|
|
10750,
|
|
10875,
|
|
11000,
|
|
0, /* reserved */
|
|
};
|
|
struct vdd_drive {
|
|
u8 vid;
|
|
unsigned voltage;
|
|
};
|
|
|
|
ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR);
|
|
if (ret) {
|
|
printf("VID: I2c failed to switch channel\n");
|
|
ret = -1;
|
|
goto exit;
|
|
}
|
|
|
|
/* get the voltage ID from fuse status register */
|
|
fusesr = in_be32(&gur->dcfg_fusesr);
|
|
vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
|
|
FSL_CORENET_DCFG_FUSESR_VID_MASK;
|
|
if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) {
|
|
vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
|
|
FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
|
|
}
|
|
vdd_target = vdd[vid];
|
|
debug("VID:Reading from from fuse,vid=%x vdd is %dmV\n",
|
|
vid, vdd_target/10);
|
|
|
|
/* check override variable for overriding VDD */
|
|
vdd_string = env_get("b4qds_vdd_mv");
|
|
if (vdd_override == 0 && vdd_string &&
|
|
!strict_strtoul(vdd_string, 10, &vdd_string_override))
|
|
vdd_override = vdd_string_override;
|
|
if (vdd_override >= 819 && vdd_override <= 1212) {
|
|
vdd_target = vdd_override * 10; /* convert to 1/10 mV */
|
|
debug("VDD override is %lu\n", vdd_override);
|
|
} else if (vdd_override != 0) {
|
|
printf("Invalid value.\n");
|
|
}
|
|
|
|
if (vdd_target == 0) {
|
|
printf("VID: VID not used\n");
|
|
ret = 0;
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* Read voltage monitor to check real voltage.
|
|
* Voltage monitor LSB is 4mv.
|
|
*/
|
|
vdd_last = read_voltage();
|
|
if (vdd_last < 0) {
|
|
printf("VID: abort VID adjustment\n");
|
|
ret = -1;
|
|
goto exit;
|
|
}
|
|
|
|
debug("VID: Core voltage is at %d mV\n", vdd_last);
|
|
ret = select_i2c_ch_pca(I2C_MUX_CH_DPM);
|
|
if (ret) {
|
|
printf("VID: I2c failed to switch channel to DPM\n");
|
|
ret = -1;
|
|
goto exit;
|
|
}
|
|
|
|
/* Round up to the value of step of Voltage regulator */
|
|
voltage = roundup(vdd_target, ZM_STEP);
|
|
debug("VID: rounded up voltage = %d\n", voltage);
|
|
|
|
/* lower the speed to 100kHz to access ZM7300 device */
|
|
debug("VID: Setting bus speed to 100KHz if not already set\n");
|
|
orig_i2c_speed = i2c_get_bus_speed();
|
|
if (orig_i2c_speed != 100000)
|
|
i2c_set_bus_speed(100000);
|
|
|
|
/* Read the existing level on board, if equal to requsted one,
|
|
no need to re-set */
|
|
existing_voltage = zm_read_voltage();
|
|
|
|
/* allowing the voltage difference of one step 0.0125V acceptable */
|
|
if ((existing_voltage >= voltage) &&
|
|
(existing_voltage < (voltage + ZM_STEP))) {
|
|
debug("VID: voltage already set as requested,returning\n");
|
|
ret = existing_voltage;
|
|
goto out;
|
|
}
|
|
debug("VID: Changing voltage for board from %dmV to %dmV\n",
|
|
existing_voltage/10, voltage/10);
|
|
|
|
if (zm_disable_wp() < 0) {
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
/* Change Voltage: the change is done through all the steps in the
|
|
way, to avoid reset to the board due to power good signal fail
|
|
in big voltage change gap jump.
|
|
*/
|
|
if (existing_voltage > voltage) {
|
|
temp_voltage = existing_voltage - ZM_STEP;
|
|
while (temp_voltage >= voltage) {
|
|
ret = zm_write_voltage(temp_voltage);
|
|
if (ret == temp_voltage) {
|
|
temp_voltage -= ZM_STEP;
|
|
} else {
|
|
/* ZM7300 device failed to set
|
|
* the voltage */
|
|
printf
|
|
("VID:Stepping down vol failed:%dmV\n",
|
|
temp_voltage/10);
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
}
|
|
} else {
|
|
temp_voltage = existing_voltage + ZM_STEP;
|
|
while (temp_voltage < (voltage + ZM_STEP)) {
|
|
ret = zm_write_voltage(temp_voltage);
|
|
if (ret == temp_voltage) {
|
|
temp_voltage += ZM_STEP;
|
|
} else {
|
|
/* ZM7300 device failed to set
|
|
* the voltage */
|
|
printf
|
|
("VID:Stepping up vol failed:%dmV\n",
|
|
temp_voltage/10);
|
|
ret = -1;
|
|
goto out;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (zm_enable_wp() < 0)
|
|
ret = -1;
|
|
|
|
/* restore the speed to 400kHz */
|
|
out: debug("VID: Restore the I2C bus speed to %dKHz\n",
|
|
orig_i2c_speed/1000);
|
|
i2c_set_bus_speed(orig_i2c_speed);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR);
|
|
if (ret) {
|
|
printf("VID: I2c failed to switch channel\n");
|
|
ret = -1;
|
|
goto exit;
|
|
}
|
|
vdd_last = read_voltage();
|
|
select_i2c_ch_pca(I2C_CH_DEFAULT);
|
|
|
|
if (vdd_last > 0)
|
|
printf("VID: Core voltage %d mV\n", vdd_last);
|
|
else
|
|
ret = -1;
|
|
|
|
exit:
|
|
if (re_enable)
|
|
enable_interrupts();
|
|
return ret;
|
|
}
|
|
|
|
int configure_vsc3316_3308(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
unsigned int num_vsc16_con, num_vsc08_con;
|
|
u32 serdes1_prtcl, serdes2_prtcl;
|
|
int ret;
|
|
char buffer[HWCONFIG_BUFFER_SIZE];
|
|
char *buf = NULL;
|
|
|
|
serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
if (!serdes1_prtcl) {
|
|
printf("SERDES1 is not enabled\n");
|
|
return 0;
|
|
}
|
|
serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
|
|
|
|
serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
|
|
if (!serdes2_prtcl) {
|
|
printf("SERDES2 is not enabled\n");
|
|
return 0;
|
|
}
|
|
serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
|
|
debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
|
|
|
|
switch (serdes1_prtcl) {
|
|
case 0x29:
|
|
case 0x2a:
|
|
case 0x2C:
|
|
case 0x2D:
|
|
case 0x2E:
|
|
/*
|
|
* Configuration:
|
|
* SERDES: 1
|
|
* Lanes: A,B: SGMII
|
|
* Lanes: C,D,E,F,G,H: CPRI
|
|
*/
|
|
debug("Configuring crossbar to use onboard SGMII PHYs:"
|
|
"srds_prctl:%x\n", serdes1_prtcl);
|
|
num_vsc16_con = NUM_CON_VSC3316;
|
|
/* Configure VSC3316 crossbar switch */
|
|
ret = select_i2c_ch_pca(I2C_CH_VSC3316);
|
|
if (!ret) {
|
|
ret = vsc3316_config(VSC3316_TX_ADDRESS,
|
|
vsc16_tx_4sfp_sgmii_12_56,
|
|
num_vsc16_con);
|
|
if (ret)
|
|
return ret;
|
|
ret = vsc3316_config(VSC3316_RX_ADDRESS,
|
|
vsc16_rx_4sfp_sgmii_12_56,
|
|
num_vsc16_con);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
return ret;
|
|
}
|
|
break;
|
|
|
|
case 0x01:
|
|
case 0x02:
|
|
case 0x04:
|
|
case 0x05:
|
|
case 0x06:
|
|
case 0x07:
|
|
case 0x08:
|
|
case 0x09:
|
|
case 0x0A:
|
|
case 0x0B:
|
|
case 0x0C:
|
|
case 0x2F:
|
|
case 0x30:
|
|
case 0x32:
|
|
case 0x33:
|
|
case 0x34:
|
|
case 0x39:
|
|
case 0x3A:
|
|
case 0x3C:
|
|
case 0x3D:
|
|
case 0x5C:
|
|
case 0x5D:
|
|
/*
|
|
* Configuration:
|
|
* SERDES: 1
|
|
* Lanes: A,B: AURORA
|
|
* Lanes: C,d: SGMII
|
|
* Lanes: E,F,G,H: CPRI
|
|
*/
|
|
debug("Configuring crossbar for Aurora, SGMII 3 and 4,"
|
|
" and CPRI. srds_prctl:%x\n", serdes1_prtcl);
|
|
num_vsc16_con = NUM_CON_VSC3316;
|
|
/* Configure VSC3316 crossbar switch */
|
|
ret = select_i2c_ch_pca(I2C_CH_VSC3316);
|
|
if (!ret) {
|
|
ret = vsc3316_config(VSC3316_TX_ADDRESS,
|
|
vsc16_tx_sfp_sgmii_aurora,
|
|
num_vsc16_con);
|
|
if (ret)
|
|
return ret;
|
|
ret = vsc3316_config(VSC3316_RX_ADDRESS,
|
|
vsc16_rx_sfp_sgmii_aurora,
|
|
num_vsc16_con);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
return ret;
|
|
}
|
|
break;
|
|
|
|
#ifdef CONFIG_ARCH_B4420
|
|
case 0x17:
|
|
case 0x18:
|
|
/*
|
|
* Configuration:
|
|
* SERDES: 1
|
|
* Lanes: A,B,C,D: SGMII
|
|
* Lanes: E,F,G,H: CPRI
|
|
*/
|
|
debug("Configuring crossbar to use onboard SGMII PHYs:"
|
|
"srds_prctl:%x\n", serdes1_prtcl);
|
|
num_vsc16_con = NUM_CON_VSC3316;
|
|
/* Configure VSC3316 crossbar switch */
|
|
ret = select_i2c_ch_pca(I2C_CH_VSC3316);
|
|
if (!ret) {
|
|
ret = vsc3316_config(VSC3316_TX_ADDRESS,
|
|
vsc16_tx_sgmii_lane_cd, num_vsc16_con);
|
|
if (ret)
|
|
return ret;
|
|
ret = vsc3316_config(VSC3316_RX_ADDRESS,
|
|
vsc16_rx_sgmii_lane_cd, num_vsc16_con);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
return ret;
|
|
}
|
|
break;
|
|
#endif
|
|
|
|
case 0x3E:
|
|
case 0x0D:
|
|
case 0x0E:
|
|
case 0x12:
|
|
num_vsc16_con = NUM_CON_VSC3316;
|
|
/* Configure VSC3316 crossbar switch */
|
|
ret = select_i2c_ch_pca(I2C_CH_VSC3316);
|
|
if (!ret) {
|
|
ret = vsc3316_config(VSC3316_TX_ADDRESS,
|
|
vsc16_tx_sfp, num_vsc16_con);
|
|
if (ret)
|
|
return ret;
|
|
ret = vsc3316_config(VSC3316_RX_ADDRESS,
|
|
vsc16_rx_sfp, num_vsc16_con);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
return ret;
|
|
}
|
|
break;
|
|
default:
|
|
printf("WARNING:VSC crossbars programming not supported for:%x"
|
|
" SerDes1 Protocol.\n", serdes1_prtcl);
|
|
return -1;
|
|
}
|
|
|
|
num_vsc08_con = NUM_CON_VSC3308;
|
|
/* Configure VSC3308 crossbar switch */
|
|
ret = select_i2c_ch_pca(I2C_CH_VSC3308);
|
|
switch (serdes2_prtcl) {
|
|
#ifdef CONFIG_ARCH_B4420
|
|
case 0x9d:
|
|
#endif
|
|
case 0x9E:
|
|
case 0x9A:
|
|
case 0x98:
|
|
case 0x48:
|
|
case 0x49:
|
|
case 0x4E:
|
|
case 0x79:
|
|
case 0x7A:
|
|
if (!ret) {
|
|
ret = vsc3308_config(VSC3308_TX_ADDRESS,
|
|
vsc08_tx_amc, num_vsc08_con);
|
|
if (ret)
|
|
return ret;
|
|
ret = vsc3308_config(VSC3308_RX_ADDRESS,
|
|
vsc08_rx_amc, num_vsc08_con);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
return ret;
|
|
}
|
|
break;
|
|
case 0x80:
|
|
case 0x81:
|
|
case 0x82:
|
|
case 0x83:
|
|
case 0x84:
|
|
case 0x85:
|
|
case 0x86:
|
|
case 0x87:
|
|
case 0x88:
|
|
case 0x89:
|
|
case 0x8a:
|
|
case 0x8b:
|
|
case 0x8c:
|
|
case 0x8d:
|
|
case 0x8e:
|
|
case 0xb1:
|
|
case 0xb2:
|
|
if (!ret) {
|
|
/*
|
|
* Extract hwconfig from environment since environment
|
|
* is not setup properly yet
|
|
*/
|
|
env_get_f("hwconfig", buffer, sizeof(buffer));
|
|
buf = buffer;
|
|
|
|
if (hwconfig_subarg_cmp_f("fsl_b4860_serdes2",
|
|
"sfp_amc", "sfp", buf)) {
|
|
#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
|
|
/* change default VSC3308 for XFI erratum */
|
|
ret = vsc3308_config_adjust(VSC3308_TX_ADDRESS,
|
|
vsc08_tx_sfp, num_vsc08_con);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = vsc3308_config_adjust(VSC3308_RX_ADDRESS,
|
|
vsc08_rx_sfp, num_vsc08_con);
|
|
if (ret)
|
|
return ret;
|
|
#else
|
|
ret = vsc3308_config(VSC3308_TX_ADDRESS,
|
|
vsc08_tx_sfp, num_vsc08_con);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = vsc3308_config(VSC3308_RX_ADDRESS,
|
|
vsc08_rx_sfp, num_vsc08_con);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
} else {
|
|
ret = vsc3308_config(VSC3308_TX_ADDRESS,
|
|
vsc08_tx_amc, num_vsc08_con);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = vsc3308_config(VSC3308_RX_ADDRESS,
|
|
vsc08_rx_amc, num_vsc08_con);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
} else {
|
|
return ret;
|
|
}
|
|
break;
|
|
default:
|
|
printf("WARNING:VSC crossbars programming not supported for: %x"
|
|
" SerDes2 Protocol.\n", serdes2_prtcl);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int calibrate_pll(serdes_corenet_t *srds_regs, int pll_num)
|
|
{
|
|
u32 rst_err;
|
|
|
|
/* Steps For SerDes PLLs reset and reconfiguration
|
|
* or PLL power-up procedure
|
|
*/
|
|
debug("CALIBRATE PLL:%d\n", pll_num);
|
|
clrbits_be32(&srds_regs->bank[pll_num].rstctl,
|
|
SRDS_RSTCTL_SDRST_B);
|
|
udelay(10);
|
|
clrbits_be32(&srds_regs->bank[pll_num].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B));
|
|
udelay(10);
|
|
setbits_be32(&srds_regs->bank[pll_num].rstctl,
|
|
SRDS_RSTCTL_RST);
|
|
setbits_be32(&srds_regs->bank[pll_num].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
|
|
| SRDS_RSTCTL_SDRST_B));
|
|
|
|
udelay(20);
|
|
|
|
/* Check whether PLL has been locked or not */
|
|
rst_err = in_be32(&srds_regs->bank[pll_num].rstctl) &
|
|
SRDS_RSTCTL_RSTERR;
|
|
rst_err >>= SRDS_RSTCTL_RSTERR_SHIFT;
|
|
debug("RST_ERR value for PLL %d is: 0x%x:\n", pll_num, rst_err);
|
|
if (rst_err)
|
|
return rst_err;
|
|
|
|
return rst_err;
|
|
}
|
|
|
|
static int check_pll_locks(serdes_corenet_t *srds_regs, int pll_num)
|
|
{
|
|
int ret = 0;
|
|
u32 fcap, dcbias, bcap, pllcr1, pllcr0;
|
|
|
|
if (calibrate_pll(srds_regs, pll_num)) {
|
|
/* STEP 1 */
|
|
/* Read fcap, dcbias and bcap value */
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
|
|
SRDS_PLLCR0_DCBIAS_OUT_EN);
|
|
fcap = in_be32(&srds_regs->bank[pll_num].pllsr2) &
|
|
SRDS_PLLSR2_FCAP;
|
|
fcap >>= SRDS_PLLSR2_FCAP_SHIFT;
|
|
bcap = in_be32(&srds_regs->bank[pll_num].pllsr2) &
|
|
SRDS_PLLSR2_BCAP_EN;
|
|
bcap >>= SRDS_PLLSR2_BCAP_EN_SHIFT;
|
|
setbits_be32(&srds_regs->bank[pll_num].pllcr0,
|
|
SRDS_PLLCR0_DCBIAS_OUT_EN);
|
|
dcbias = in_be32(&srds_regs->bank[pll_num].pllsr2) &
|
|
SRDS_PLLSR2_DCBIAS;
|
|
dcbias >>= SRDS_PLLSR2_DCBIAS_SHIFT;
|
|
debug("values of bcap:%x, fcap:%x and dcbias:%x\n",
|
|
bcap, fcap, dcbias);
|
|
if (fcap == 0 && bcap == 1) {
|
|
/* Step 3 */
|
|
clrbits_be32(&srds_regs->bank[pll_num].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
|
|
| SRDS_RSTCTL_SDRST_B));
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_BCAP_EN);
|
|
setbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_BCAP_OVD);
|
|
if (calibrate_pll(srds_regs, pll_num)) {
|
|
/*save the fcap, dcbias and bcap values*/
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
|
|
SRDS_PLLCR0_DCBIAS_OUT_EN);
|
|
fcap = in_be32(&srds_regs->bank[pll_num].pllsr2)
|
|
& SRDS_PLLSR2_FCAP;
|
|
fcap >>= SRDS_PLLSR2_FCAP_SHIFT;
|
|
bcap = in_be32(&srds_regs->bank[pll_num].pllsr2)
|
|
& SRDS_PLLSR2_BCAP_EN;
|
|
bcap >>= SRDS_PLLSR2_BCAP_EN_SHIFT;
|
|
setbits_be32(&srds_regs->bank[pll_num].pllcr0,
|
|
SRDS_PLLCR0_DCBIAS_OUT_EN);
|
|
dcbias = in_be32
|
|
(&srds_regs->bank[pll_num].pllsr2) &
|
|
SRDS_PLLSR2_DCBIAS;
|
|
dcbias >>= SRDS_PLLSR2_DCBIAS_SHIFT;
|
|
|
|
/* Step 4*/
|
|
clrbits_be32(&srds_regs->bank[pll_num].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
|
|
| SRDS_RSTCTL_SDRST_B));
|
|
setbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_BYP_CAL);
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_BCAP_EN);
|
|
setbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_BCAP_OVD);
|
|
/* change the fcap and dcbias to the saved
|
|
* values from Step 3 */
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_PLL_FCAP);
|
|
pllcr1 = (in_be32
|
|
(&srds_regs->bank[pll_num].pllcr1)|
|
|
(fcap << SRDS_PLLCR1_PLL_FCAP_SHIFT));
|
|
out_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
pllcr1);
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
|
|
SRDS_PLLCR0_DCBIAS_OVRD);
|
|
pllcr0 = (in_be32
|
|
(&srds_regs->bank[pll_num].pllcr0)|
|
|
(dcbias << SRDS_PLLCR0_DCBIAS_OVRD_SHIFT));
|
|
out_be32(&srds_regs->bank[pll_num].pllcr0,
|
|
pllcr0);
|
|
ret = calibrate_pll(srds_regs, pll_num);
|
|
if (ret)
|
|
return ret;
|
|
} else {
|
|
goto out;
|
|
}
|
|
} else { /* Step 5 */
|
|
clrbits_be32(&srds_regs->bank[pll_num].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
|
|
| SRDS_RSTCTL_SDRST_B));
|
|
udelay(10);
|
|
/* Change the fcap, dcbias, and bcap to the
|
|
* values from Step 1 */
|
|
setbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_BYP_CAL);
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_PLL_FCAP);
|
|
pllcr1 = (in_be32(&srds_regs->bank[pll_num].pllcr1)|
|
|
(fcap << SRDS_PLLCR1_PLL_FCAP_SHIFT));
|
|
out_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
pllcr1);
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr0,
|
|
SRDS_PLLCR0_DCBIAS_OVRD);
|
|
pllcr0 = (in_be32(&srds_regs->bank[pll_num].pllcr0)|
|
|
(dcbias << SRDS_PLLCR0_DCBIAS_OVRD_SHIFT));
|
|
out_be32(&srds_regs->bank[pll_num].pllcr0,
|
|
pllcr0);
|
|
clrbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_BCAP_EN);
|
|
setbits_be32(&srds_regs->bank[pll_num].pllcr1,
|
|
SRDS_PLLCR1_BCAP_OVD);
|
|
ret = calibrate_pll(srds_regs, pll_num);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
}
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
static int check_serdes_pll_locks(void)
|
|
{
|
|
serdes_corenet_t *srds1_regs =
|
|
(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
|
|
serdes_corenet_t *srds2_regs =
|
|
(void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
|
|
int i, ret1, ret2;
|
|
|
|
debug("\nSerDes1 Lock check\n");
|
|
for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
|
|
ret1 = check_pll_locks(srds1_regs, i);
|
|
if (ret1) {
|
|
printf("SerDes1, PLL:%d didnt lock\n", i);
|
|
return ret1;
|
|
}
|
|
}
|
|
debug("\nSerDes2 Lock check\n");
|
|
for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
|
|
ret2 = check_pll_locks(srds2_regs, i);
|
|
if (ret2) {
|
|
printf("SerDes2, PLL:%d didnt lock\n", i);
|
|
return ret2;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int config_serdes1_refclks(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
serdes_corenet_t *srds_regs =
|
|
(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
|
|
u32 serdes1_prtcl, lane;
|
|
unsigned int flag_sgmii_aurora_prtcl = 0;
|
|
int i;
|
|
int ret = 0;
|
|
|
|
serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
if (!serdes1_prtcl) {
|
|
printf("SERDES1 is not enabled\n");
|
|
return -1;
|
|
}
|
|
serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
|
|
|
|
/* To prevent generation of reset request from SerDes
|
|
* while changing the refclks, By setting SRDS_RST_MSK bit,
|
|
* SerDes reset event cannot cause a reset request
|
|
*/
|
|
setbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
|
|
|
|
/* Reconfigure IDT idt8t49n222a device for CPRI to work
|
|
* For this SerDes1's Refclk1 and refclk2 need to be set
|
|
* to 122.88MHz
|
|
*/
|
|
switch (serdes1_prtcl) {
|
|
case 0x29:
|
|
case 0x2A:
|
|
case 0x2C:
|
|
case 0x2D:
|
|
case 0x2E:
|
|
case 0x01:
|
|
case 0x02:
|
|
case 0x04:
|
|
case 0x05:
|
|
case 0x06:
|
|
case 0x07:
|
|
case 0x08:
|
|
case 0x09:
|
|
case 0x0A:
|
|
case 0x0B:
|
|
case 0x0C:
|
|
case 0x2F:
|
|
case 0x30:
|
|
case 0x32:
|
|
case 0x33:
|
|
case 0x34:
|
|
case 0x39:
|
|
case 0x3A:
|
|
case 0x3C:
|
|
case 0x3D:
|
|
case 0x5C:
|
|
case 0x5D:
|
|
debug("Configuring idt8t49n222a for CPRI SerDes clks:"
|
|
" for srds_prctl:%x\n", serdes1_prtcl);
|
|
ret = select_i2c_ch_pca(I2C_CH_IDT);
|
|
if (!ret) {
|
|
ret = set_serdes_refclk(IDT_SERDES1_ADDRESS, 1,
|
|
SERDES_REFCLK_122_88,
|
|
SERDES_REFCLK_122_88, 0);
|
|
if (ret) {
|
|
printf("IDT8T49N222A configuration failed.\n");
|
|
goto out;
|
|
} else
|
|
debug("IDT8T49N222A configured.\n");
|
|
} else {
|
|
goto out;
|
|
}
|
|
select_i2c_ch_pca(I2C_CH_DEFAULT);
|
|
|
|
/* Change SerDes1's Refclk1 to 125MHz for on board
|
|
* SGMIIs or Aurora to work
|
|
*/
|
|
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
|
|
enum srds_prtcl lane_prtcl = serdes_get_prtcl
|
|
(0, serdes1_prtcl, lane);
|
|
switch (lane_prtcl) {
|
|
case SGMII_FM1_DTSEC1:
|
|
case SGMII_FM1_DTSEC2:
|
|
case SGMII_FM1_DTSEC3:
|
|
case SGMII_FM1_DTSEC4:
|
|
case SGMII_FM1_DTSEC5:
|
|
case SGMII_FM1_DTSEC6:
|
|
case AURORA:
|
|
flag_sgmii_aurora_prtcl++;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (flag_sgmii_aurora_prtcl)
|
|
QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
|
|
|
|
/* Steps For SerDes PLLs reset and reconfiguration after
|
|
* changing SerDes's refclks
|
|
*/
|
|
for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
|
|
debug("For PLL%d reset and reconfiguration after"
|
|
" changing refclks\n", i+1);
|
|
clrbits_be32(&srds_regs->bank[i].rstctl,
|
|
SRDS_RSTCTL_SDRST_B);
|
|
udelay(10);
|
|
clrbits_be32(&srds_regs->bank[i].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B));
|
|
udelay(10);
|
|
setbits_be32(&srds_regs->bank[i].rstctl,
|
|
SRDS_RSTCTL_RST);
|
|
setbits_be32(&srds_regs->bank[i].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
|
|
| SRDS_RSTCTL_SDRST_B));
|
|
}
|
|
break;
|
|
default:
|
|
printf("WARNING:IDT8T49N222A configuration not"
|
|
" supported for:%x SerDes1 Protocol.\n",
|
|
serdes1_prtcl);
|
|
}
|
|
|
|
out:
|
|
/* Clearing SRDS_RST_MSK bit as now
|
|
* SerDes reset event can cause a reset request
|
|
*/
|
|
clrbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
|
|
return ret;
|
|
}
|
|
|
|
int config_serdes2_refclks(void)
|
|
{
|
|
ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
serdes_corenet_t *srds2_regs =
|
|
(void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
|
|
u32 serdes2_prtcl;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
|
|
if (!serdes2_prtcl) {
|
|
debug("SERDES2 is not enabled\n");
|
|
return -ENODEV;
|
|
}
|
|
serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
|
|
debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
|
|
|
|
/* To prevent generation of reset request from SerDes
|
|
* while changing the refclks, By setting SRDS_RST_MSK bit,
|
|
* SerDes reset event cannot cause a reset request
|
|
*/
|
|
setbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
|
|
|
|
/* Reconfigure IDT idt8t49n222a device for PCIe SATA to work
|
|
* For this SerDes2's Refclk1 need to be set to 100MHz
|
|
*/
|
|
switch (serdes2_prtcl) {
|
|
#ifdef CONFIG_ARCH_B4420
|
|
case 0x9d:
|
|
#endif
|
|
case 0x9E:
|
|
case 0x9A:
|
|
/* fallthrough */
|
|
case 0xb1:
|
|
case 0xb2:
|
|
debug("Configuring IDT for PCIe SATA for srds_prctl:%x\n",
|
|
serdes2_prtcl);
|
|
ret = select_i2c_ch_pca(I2C_CH_IDT);
|
|
if (!ret) {
|
|
ret = set_serdes_refclk(IDT_SERDES2_ADDRESS, 2,
|
|
SERDES_REFCLK_100,
|
|
SERDES_REFCLK_156_25, 0);
|
|
if (ret) {
|
|
printf("IDT8T49N222A configuration failed.\n");
|
|
goto out;
|
|
} else
|
|
debug("IDT8T49N222A configured.\n");
|
|
} else {
|
|
goto out;
|
|
}
|
|
select_i2c_ch_pca(I2C_CH_DEFAULT);
|
|
|
|
/* Steps For SerDes PLLs reset and reconfiguration after
|
|
* changing SerDes's refclks
|
|
*/
|
|
for (i = 0; i < CONFIG_SYS_FSL_SRDS_NUM_PLLS; i++) {
|
|
clrbits_be32(&srds2_regs->bank[i].rstctl,
|
|
SRDS_RSTCTL_SDRST_B);
|
|
udelay(10);
|
|
clrbits_be32(&srds2_regs->bank[i].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B));
|
|
udelay(10);
|
|
setbits_be32(&srds2_regs->bank[i].rstctl,
|
|
SRDS_RSTCTL_RST);
|
|
setbits_be32(&srds2_regs->bank[i].rstctl,
|
|
(SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B
|
|
| SRDS_RSTCTL_SDRST_B));
|
|
|
|
udelay(10);
|
|
}
|
|
break;
|
|
default:
|
|
printf("IDT configuration not supported for:%x S2 Protocol.\n",
|
|
serdes2_prtcl);
|
|
}
|
|
|
|
out:
|
|
/* Clearing SRDS_RST_MSK bit as now
|
|
* SerDes reset event can cause a reset request
|
|
*/
|
|
clrbits_be32(&gur->rstrqmr1, FSL_CORENET_RSTRQMR1_SRDS_RST_MSK);
|
|
return ret;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
int flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
int ret;
|
|
u32 svr = SVR_SOC_VER(get_svr());
|
|
|
|
/* Create law for MAPLE only for personalities having MAPLE */
|
|
if ((svr == SVR_B4860) || (svr == SVR_B4440) ||
|
|
(svr == SVR_B4420) || (svr == SVR_B4220)) {
|
|
set_next_law(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M,
|
|
LAW_TRGT_IF_MAPLE);
|
|
}
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
if (flash_esel == -1) {
|
|
/* very unlikely unless something is messed up */
|
|
puts("Error: Could not find TLB for FLASH BASE\n");
|
|
flash_esel = 2; /* give our best effort to continue */
|
|
} else {
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
}
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1);
|
|
|
|
/*
|
|
* Adjust core voltage according to voltage ID
|
|
* This function changes I2C mux to channel 2.
|
|
*/
|
|
if (adjust_vdd(0) < 0)
|
|
printf("Warning: Adjusting core voltage failed\n");
|
|
|
|
/* SerDes1 refclks need to be set again, as default clks
|
|
* are not suitable for CPRI and onboard SGMIIs to work
|
|
* simultaneously.
|
|
* This function will set SerDes1's Refclk1 and refclk2
|
|
* as per SerDes1 protocols
|
|
*/
|
|
if (config_serdes1_refclks())
|
|
printf("SerDes1 Refclks couldn't set properly.\n");
|
|
else
|
|
printf("SerDes1 Refclks have been set.\n");
|
|
|
|
/* SerDes2 refclks need to be set again, as default clks
|
|
* are not suitable for PCIe SATA to work
|
|
* This function will set SerDes2's Refclk1 and refclk2
|
|
* for SerDes2 protocols having PCIe in them
|
|
* for PCIe SATA to work
|
|
*/
|
|
ret = config_serdes2_refclks();
|
|
if (!ret)
|
|
printf("SerDes2 Refclks have been set.\n");
|
|
else if (ret == -ENODEV)
|
|
printf("SerDes disable, Refclks couldn't change.\n");
|
|
else
|
|
printf("SerDes2 Refclk reconfiguring failed.\n");
|
|
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_A006384) || \
|
|
defined(CONFIG_SYS_FSL_ERRATUM_A006475)
|
|
/* Rechecking the SerDes locks after all SerDes configurations
|
|
* are done, As SerDes PLLs may not lock reliably at 5 G VCO
|
|
* and at cold temperatures.
|
|
* Following sequence ensure the proper locking of SerDes PLLs.
|
|
*/
|
|
if (SVR_MAJ(get_svr()) == 1) {
|
|
if (check_serdes_pll_locks())
|
|
printf("SerDes plls still not locked properly.\n");
|
|
else
|
|
printf("SerDes plls have been locked well.\n");
|
|
}
|
|
#endif
|
|
|
|
/* Configure VSC3316 and VSC3308 crossbar switches */
|
|
if (configure_vsc3316_3308())
|
|
printf("VSC:failed to configure VSC3316/3308.\n");
|
|
else
|
|
printf("VSC:VSC3316/3308 successfully configured.\n");
|
|
|
|
select_i2c_ch_pca(I2C_CH_DEFAULT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long get_board_sys_clk(void)
|
|
{
|
|
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch ((sysclk_conf & 0x0C) >> 2) {
|
|
case QIXIS_CLK_100:
|
|
return 100000000;
|
|
case QIXIS_CLK_125:
|
|
return 125000000;
|
|
case QIXIS_CLK_133:
|
|
return 133333333;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
unsigned long get_board_ddr_clk(void)
|
|
{
|
|
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch (ddrclk_conf & 0x03) {
|
|
case QIXIS_CLK_100:
|
|
return 100000000;
|
|
case QIXIS_CLK_125:
|
|
return 125000000;
|
|
case QIXIS_CLK_133:
|
|
return 133333333;
|
|
}
|
|
return 66666666;
|
|
}
|
|
|
|
static int serdes_refclock(u8 sw, u8 sdclk)
|
|
{
|
|
unsigned int clock;
|
|
int ret = -1;
|
|
u8 brdcfg4;
|
|
|
|
if (sdclk == 1) {
|
|
brdcfg4 = QIXIS_READ(brdcfg[4]);
|
|
if ((brdcfg4 & CLK_MUX_SEL_MASK) == ETH_PHY_CLK_OUT)
|
|
return SRDS_PLLCR0_RFCK_SEL_125;
|
|
else
|
|
clock = (sw >> 5) & 7;
|
|
} else
|
|
clock = (sw >> 6) & 3;
|
|
|
|
switch (clock) {
|
|
case 0:
|
|
ret = SRDS_PLLCR0_RFCK_SEL_100;
|
|
break;
|
|
case 1:
|
|
ret = SRDS_PLLCR0_RFCK_SEL_125;
|
|
break;
|
|
case 2:
|
|
ret = SRDS_PLLCR0_RFCK_SEL_156_25;
|
|
break;
|
|
case 3:
|
|
ret = SRDS_PLLCR0_RFCK_SEL_161_13;
|
|
break;
|
|
case 4:
|
|
case 5:
|
|
case 6:
|
|
ret = SRDS_PLLCR0_RFCK_SEL_122_88;
|
|
break;
|
|
default:
|
|
ret = -1;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define NUM_SRDS_BANKS 2
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u8 sw;
|
|
serdes_corenet_t *srds_regs =
|
|
(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
|
|
u32 actual[NUM_SRDS_BANKS];
|
|
unsigned int i;
|
|
int clock;
|
|
|
|
sw = QIXIS_READ(brdcfg[2]);
|
|
clock = serdes_refclock(sw, 1);
|
|
if (clock >= 0)
|
|
actual[0] = clock;
|
|
else
|
|
printf("Warning: SDREFCLK1 switch setting is unsupported\n");
|
|
|
|
sw = QIXIS_READ(brdcfg[4]);
|
|
clock = serdes_refclock(sw, 2);
|
|
if (clock >= 0)
|
|
actual[1] = clock;
|
|
else
|
|
printf("Warning: SDREFCLK2 switch setting unsupported\n");
|
|
|
|
for (i = 0; i < NUM_SRDS_BANKS; i++) {
|
|
u32 pllcr0 = srds_regs->bank[i].pllcr0;
|
|
u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
|
|
if (expected != actual[i]) {
|
|
printf("Warning: SERDES bank %u expects reference clock"
|
|
" %sMHz, but actual is %sMHz\n", i + 1,
|
|
serdes_clock_to_string(expected),
|
|
serdes_clock_to_string(actual[i]));
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
phys_addr_t base;
|
|
phys_size_t size;
|
|
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
base = env_get_bootm_low();
|
|
size = env_get_bootm_size();
|
|
|
|
fdt_fixup_memory(blob, (u64)base, (u64)size);
|
|
|
|
#ifdef CONFIG_PCI
|
|
pci_of_setup(blob, bd);
|
|
#endif
|
|
|
|
fdt_fixup_liodn(blob);
|
|
|
|
#ifdef CONFIG_HAS_FSL_DR_USB
|
|
fsl_fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
fdt_fixup_fman_ethernet(blob);
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Dump board switch settings.
|
|
* The bits that cannot be read/sampled via some FPGA or some
|
|
* registers, they will be displayed as
|
|
* underscore in binary format. mask[] has those bits.
|
|
* Some bits are calculated differently than the actual switches
|
|
* if booting with overriding by FPGA.
|
|
*/
|
|
void qixis_dump_switch(void)
|
|
{
|
|
int i;
|
|
u8 sw[5];
|
|
|
|
/*
|
|
* Any bit with 1 means that bit cannot be reverse engineered.
|
|
* It will be displayed as _ in binary format.
|
|
*/
|
|
static const u8 mask[] = {0x07, 0, 0, 0xff, 0};
|
|
char buf[10];
|
|
u8 brdcfg[16], dutcfg[16];
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
|
|
dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
|
|
}
|
|
|
|
sw[0] = ((brdcfg[0] & 0x0f) << 4) | \
|
|
(brdcfg[9] & 0x08);
|
|
sw[1] = ((dutcfg[1] & 0x01) << 7) | \
|
|
((dutcfg[2] & 0x07) << 4) | \
|
|
((dutcfg[6] & 0x10) >> 1) | \
|
|
((dutcfg[6] & 0x80) >> 5) | \
|
|
((dutcfg[1] & 0x40) >> 5) | \
|
|
(dutcfg[6] & 0x01);
|
|
sw[2] = dutcfg[0];
|
|
sw[3] = 0;
|
|
sw[4] = ((brdcfg[1] & 0x30) << 2) | \
|
|
((brdcfg[1] & 0xc0) >> 2) | \
|
|
(brdcfg[1] & 0x0f);
|
|
|
|
puts("DIP switch settings:\n");
|
|
for (i = 0; i < 5; i++) {
|
|
printf("SW%d = 0b%s (0x%02x)\n",
|
|
i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
|
|
}
|
|
}
|