mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Poonam Aggrwal](/assets/img/avatar_default.png)
Boot methods supported: NOR Flash, SPI Flash and SDCARD This patch adds the following basic interfaces: DDR3, eTSEC, DUART, I2C, SD/MMC, USB, SATA, PCIe, NOR Flash, SPI Flash. P1010RDB Overview ----------------- 1Gbyte DDR3 (on board DDR) Local Bus (IFC): 32Mbyte 16bit NOR flash 32Mbyte SLC NAND Flash 64KB CPLD device(GPCM interface) SPI Flash: 128 Mbit SPI Flash memory SD/MMC: connector to interface with the SD memory card SATA: 1 internal SATA connect to 2.5. 160G SATA2 HDD 1 eSATA connector to rear panel USB 2.0: x1 USB 2.0 port: connected via a UTMI PHY to Mini-AB interface. x1 USB 2.0 port: directly connected to Mini-AB interface Ethernet eTSEC: eTSEC1: Connected to RGMII PHY VSC8641XKO eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY VSC8221 eCAN: Two DB-9 female connectors for Field bus interface UART: supports two UARTs up to 115200 bps for console TDM: 2 FXS ports connected via an external SLIC to the TDM interface. SLIC: SPI SLIC I2C: Serial EEprom Real time clock 256 Kbit M24256 I2C EEPROM PCIe: PCIe and mPCIe connectors. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
251 lines
7.3 KiB
C
251 lines
7.3 KiB
C
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/fsl_ddr_dimm_params.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_law.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef CONFIG_DDR_RAW_TIMING
|
|
#define CONFIG_SYS_DRAM_SIZE 1024
|
|
|
|
fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
|
|
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
|
|
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
|
|
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
|
|
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
|
|
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
|
|
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
|
|
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
|
|
.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
|
|
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
|
|
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
|
|
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
|
|
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
|
|
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
|
|
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
|
|
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
|
|
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
|
|
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
|
|
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
|
|
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
|
|
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
|
|
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
|
|
.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
|
|
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
|
|
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
|
|
};
|
|
|
|
fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = {
|
|
.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
|
|
.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
|
|
.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
|
|
.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_667,
|
|
.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_667,
|
|
.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_667,
|
|
.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_667,
|
|
.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
|
|
.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
|
|
.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_667,
|
|
.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_667,
|
|
.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
|
|
.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_667,
|
|
.ddr_data_init = CONFIG_MEM_INIT_VALUE,
|
|
.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_667,
|
|
.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
|
|
.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
|
|
.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
|
|
.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
|
|
.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
|
|
.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_667,
|
|
.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
|
|
.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
|
|
.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
|
|
};
|
|
|
|
fixed_ddr_parm_t fixed_ddr_parm_0[] = {
|
|
{750, 850, &ddr_cfg_regs_800},
|
|
{607, 749, &ddr_cfg_regs_667},
|
|
{0, 0, NULL}
|
|
};
|
|
|
|
unsigned long get_sdram_size(void)
|
|
{
|
|
struct cpu_type *cpu;
|
|
phys_size_t ddr_size;
|
|
|
|
cpu = gd->cpu;
|
|
/* P1014 and it's derivatives support max 16it DDR width */
|
|
if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E)
|
|
ddr_size = (CONFIG_SYS_DRAM_SIZE / 2);
|
|
else
|
|
ddr_size = CONFIG_SYS_DRAM_SIZE;
|
|
|
|
return ddr_size;
|
|
}
|
|
|
|
/*
|
|
* Fixed sdram init -- doesn't use serial presence detect.
|
|
*/
|
|
phys_size_t fixed_sdram(void)
|
|
{
|
|
int i;
|
|
char buf[32];
|
|
fsl_ddr_cfg_regs_t ddr_cfg_regs;
|
|
phys_size_t ddr_size;
|
|
ulong ddr_freq, ddr_freq_mhz;
|
|
struct cpu_type *cpu;
|
|
|
|
#if defined(CONFIG_SYS_RAMBOOT)
|
|
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
#endif
|
|
|
|
ddr_freq = get_ddr_freq(0);
|
|
ddr_freq_mhz = ddr_freq / 1000000;
|
|
|
|
printf("Configuring DDR for %s MT/s data rate\n",
|
|
strmhz(buf, ddr_freq));
|
|
|
|
for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
|
|
if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
|
|
(ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
|
|
memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
|
|
sizeof(ddr_cfg_regs));
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (fixed_ddr_parm_0[i].max_freq == 0)
|
|
panic("Unsupported DDR data rate %s MT/s data rate\n",
|
|
strmhz(buf, ddr_freq));
|
|
|
|
cpu = gd->cpu;
|
|
/* P1014 and it's derivatives support max 16bit DDR width */
|
|
if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E) {
|
|
ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_16_BE;
|
|
ddr_cfg_regs.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS >> 1;
|
|
ddr_cfg_regs.ddr_sdram_cfg &= ~0x00180000;
|
|
ddr_cfg_regs.ddr_sdram_cfg |= 0x001080000;
|
|
}
|
|
|
|
ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
|
|
|
|
if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
|
|
LAW_TRGT_IF_DDR_1) < 0) {
|
|
printf("ERROR setting Local Access Windows for DDR\n");
|
|
return 0;
|
|
}
|
|
|
|
return ddr_size;
|
|
}
|
|
|
|
#else /* CONFIG_DDR_RAW_TIMING */
|
|
/*
|
|
* Samsung K4B2G0846C-HCF8
|
|
* The following timing are for "downshift"
|
|
* i.e. to use CL9 part as CL7
|
|
* otherwise, tAA, tRCD, tRP will be 13500ps
|
|
* and tRC will be 49500ps
|
|
*/
|
|
dimm_params_t ddr_raw_timing = {
|
|
.n_ranks = 1,
|
|
.rank_density = 1073741824u,
|
|
.capacity = 1073741824u,
|
|
.primary_sdram_width = 32,
|
|
.ec_sdram_width = 0,
|
|
.registered_dimm = 0,
|
|
.mirrored_dimm = 0,
|
|
.n_row_addr = 15,
|
|
.n_col_addr = 10,
|
|
.n_banks_per_sdram_device = 8,
|
|
.edc_config = 0,
|
|
.burst_lengths_bitmask = 0x0c,
|
|
|
|
.tCKmin_X_ps = 1875,
|
|
.caslat_X = 0x1e << 4, /* 5,6,7,8 */
|
|
.tAA_ps = 13125,
|
|
.tWR_ps = 15000,
|
|
.tRCD_ps = 13125,
|
|
.tRRD_ps = 7500,
|
|
.tRP_ps = 13125,
|
|
.tRAS_ps = 37500,
|
|
.tRC_ps = 50625,
|
|
.tRFC_ps = 160000,
|
|
.tWTR_ps = 7500,
|
|
.tRTP_ps = 7500,
|
|
.refresh_rate_ps = 7800000,
|
|
.tFAW_ps = 37500,
|
|
};
|
|
|
|
int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
|
|
unsigned int controller_number,
|
|
unsigned int dimm_number)
|
|
{
|
|
const char dimm_model[] = "Fixed DDR on board";
|
|
|
|
if ((controller_number == 0) && (dimm_number == 0)) {
|
|
memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
|
|
memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
|
|
memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void fsl_ddr_board_options(memctl_options_t *popts,
|
|
dimm_params_t *pdimm,
|
|
unsigned int ctrl_num)
|
|
{
|
|
struct cpu_type *cpu;
|
|
int i;
|
|
popts->clk_adjust = 6;
|
|
popts->cpo_override = 0x1f;
|
|
popts->write_data_delay = 2;
|
|
popts->half_strength_driver_enable = 1;
|
|
/* Write leveling override */
|
|
popts->wrlvl_en = 1;
|
|
popts->wrlvl_override = 1;
|
|
popts->wrlvl_sample = 0xf;
|
|
popts->wrlvl_start = 0x8;
|
|
popts->trwt_override = 1;
|
|
popts->trwt = 0;
|
|
|
|
cpu = gd->cpu;
|
|
/* P1014 and it's derivatives support max 16it DDR width */
|
|
if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E)
|
|
popts->data_bus_width = DDR_DATA_BUS_WIDTH_16;
|
|
|
|
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
|
|
popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
|
|
popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
|
|
}
|
|
}
|
|
|
|
#endif /* CONFIG_DDR_RAW_TIMING */
|