Nikhil Badola 11856919f2 fsl/usb: Workaround for USB erratum-A007075 ... Put a delay of 5 millisecond after reset so that ULPI phy gets enough time to come out of reset. Erratum A007075 applies to following SOCs and their variants, if any P1010 rev 1.0 B4860 rev 1.0, 2.0 P4080 rev 2.0, 3.0 Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>		2014-04-22 17:58:48 -07:00
..
ehci-armada100.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-atmel.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-exynos.c	usb: exynos5: arndale: Add network support	2014-01-13 12:23:28 +01:00
ehci-faraday.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-fsl.c	fsl/usb: Workaround for USB erratum-A007075	2014-04-22 17:58:48 -07:00
ehci-hcd.c	usb: ehci: fully align interrupt QHs/QTDs	2014-03-10 18:53:36 +01:00
ehci-marvell.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-mpc512x.c	powerpc/usb:Differentiate USB controller base address	2013-10-24 09:35:09 -07:00
ehci-mx5.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-mx6.c	usb: ehci-mx6: add support for otg port	2013-10-20 23:46:33 +02:00
ehci-mxc.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-mxs.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-omap.c	usb: ehci-omap: Reset the USB Host OMAP module	2013-12-06 07:02:32 -05:00
ehci-pci.c	usb: ehci-pci: Clarify and cleanup the EHCI controller detection	2013-12-18 19:53:19 +01:00
ehci-ppc4xx.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-spear.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-tegra.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci-vct.c	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
ehci.h	usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.	2013-10-20 23:46:27 +02:00
isp116x-hcd.c	usb: create common header virtual root hub descriptors	2014-03-10 18:53:36 +01:00
isp116x.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
Makefile	ARM: USB: Remove the IXP EHCI driver	2014-02-06 02:51:52 +01:00
ohci-at91.c	arm: atmel: get rid of too many ifdeffery	2013-11-04 20:32:37 +01:00
ohci-da8xx.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
ohci-hcd.c	usb: create common header virtual root hub descriptors	2014-03-10 18:53:36 +01:00
ohci-s3c24xx.c	usb: create common header virtual root hub descriptors	2014-03-10 18:53:36 +01:00
ohci-s3c24xx.h	dm: Move s3c24xx USB driver to a proper place	2012-10-18 06:54:18 +02:00
ohci.h	usb: new board-specific USB init interface	2013-10-20 23:42:40 +02:00
r8a66597-hcd.c	usb: create common header virtual root hub descriptors	2014-03-10 18:53:36 +01:00
r8a66597.h	usb: r8a66597: Fix argument mistake of inl	2011-08-08 21:40:40 +02:00
sl811-hcd.c	usb: add enum usb_init_type parameter to usb_lowlevel_init	2013-10-20 23:45:26 +02:00
sl811.h	drivers/usb: regorganisation	2009-04-06 20:40:46 +02:00
utmi-armada100.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
xhci-exynos5.c	exynos: usb: Switch USB VBUS GPIOs to be device tree configured	2013-10-20 23:42:38 +02:00
xhci-mem.c	USB: xHCI: Add stack support for xHCI	2013-10-20 23:42:38 +02:00
xhci-omap.c	usb: rename board_usb_init_type to usb_init_type	2013-10-22 17:33:09 -04:00
xhci-ring.c	USB: xHCI: Add stack support for xHCI	2013-10-20 23:42:38 +02:00
xhci.c	usb: add enum usb_init_type parameter to usb_lowlevel_init	2013-10-20 23:45:26 +02:00
xhci.h	USB: xHCI: Add stack support for xHCI	2013-10-20 23:42:38 +02:00