u-boot-brain/include/configs/pumpkin.h
Fabien Parent bb4c5d6055 board: mediatek: Add pumpkin board support
The pumpkin board is made by Gossamer Engineering and is using
a MediaTek SoC. The board currently comes in two available version:
MT8516 SoC and MT8167 SoC.
The board provides the following IOs: eMMC, NAND, SD card, USB type-A,
Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in),
serial over USB, and an expansion header.

Additionally there is a HDMI port, DSI port, and camera port only
on the MT8167 version of the board.

The board can be powered by battery and/or via a USB Type-C port and
is using a PMIC MT6392.

The eMMC and NAND are sharing pins and cannot be used together.

This commit is adding the basic boot support for the Pumpkin MT8516
board on the eMMC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
2019-07-29 09:32:11 -04:00

56 lines
1.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuration for Pumpkin board
*
* Copyright (C) 2019 BayLibre, SAS
* Author: Fabien Parent <fparent@baylibre.com
*/
#ifndef __PUMPKIN_H
#define __PUMPKIN_H
#include <linux/sizes.h>
#define CONFIG_ENV_SIZE SZ_4K
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN SZ_4M
#define CONFIG_CPU_ARMV8
#define COUNTER_FREQUENCY 13000000
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SYS_NS16550_COM1 0x11005000
#define CONFIG_SYS_NS16550_CLK 26000000
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_BOOTM_LEN SZ_64M
/* Environment settings */
#include <config_distro_bootcmd.h>
#define MMCBOOT \
"mmcdev=0\0" \
"kernel_partition=2\0" \
"rootfs_partition=3\0" \
"mmc_discover_partition=" \
"part start mmc ${mmcdev} ${kernel_partition} kernel_part_addr;" \
"part size mmc ${mmcdev} ${kernel_partition} kernel_part_size;\0" \
"mmcboot=" \
"mmc dev ${mmcdev};" \
"run mmc_discover_partition;" \
"mmc read ${kerneladdr} ${kernel_part_addr} ${kernel_part_size};" \
"setenv bootargs ${bootargs} root=/dev/mmcblk${mmcdev}p${rootfs_partition} rootwait; " \
"bootm ${kerneladdr}; \0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"kerneladdr=0x4A000000\0" \
MMCBOOT \
"bootcmd=run mmcboot;\0"
#endif