mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-30 22:08:52 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
The t3corp board has an Xilinx DS617 flash chip connected to the onboard FPGA. This patch adds support for these chips. Board specific flash accessor functions are needed, since the chips can only be read correctly in 16bit mode. Additionally the FPGA chip-selects are configured for device-paced transfers (ready is enabled). Signed-off-by: Stefan Roese <sr@denx.de>
553 lines
22 KiB
C
553 lines
22 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* t3corp.h - configuration for T3CORP (460GT)
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_460GT 1 /* Specific PPC460GT */
|
|
#define CONFIG_440 1
|
|
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
|
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
|
|
#endif
|
|
|
|
#define CONFIG_HOSTNAME t3corp
|
|
|
|
/*
|
|
* Include common defines/options for all AMCC/APM eval boards
|
|
*/
|
|
#include "amcc-common.h"
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
|
#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
|
|
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
|
|
#define CONFIG_BOARD_TYPES 1 /* support board types */
|
|
#define CONFIG_FIT
|
|
#define CFG_ALT_MEMTEST
|
|
|
|
/*
|
|
* Base addresses -- Note these are effective addresses where the
|
|
* actual resources get mapped (not physical addresses)
|
|
*/
|
|
#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
|
|
#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
|
|
#define CONFIG_SYS_PCI_TARGBASE CONFIG_SYS_PCI_MEMBASE
|
|
|
|
#define CONFIG_SYS_PCIE_MEMBASE 0xb0000000 /* mapped PCIe mem */
|
|
#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* incr for PCIe */
|
|
#define CONFIG_SYS_PCIE_BASE 0xc4000000 /* PCIe UTL regs */
|
|
|
|
#define CONFIG_SYS_PCIE0_CFGBASE 0xc0000000
|
|
#define CONFIG_SYS_PCIE1_CFGBASE 0xc1000000
|
|
#define CONFIG_SYS_PCIE0_XCFGBASE 0xc3000000
|
|
#define CONFIG_SYS_PCIE1_XCFGBASE 0xc3001000
|
|
|
|
#define CONFIG_SYS_PCIE0_UTLBASE 0xc08010000ULL /* 36bit phys addr */
|
|
|
|
/* base address of inbound PCIe window */
|
|
#define CONFIG_SYS_PCIE_INBOUND_BASE 0x000000000ULL /* 36bit phys addr */
|
|
|
|
/* EBC stuff */
|
|
#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* later mapped here */
|
|
#define CONFIG_SYS_FLASH_SIZE (64 << 20)
|
|
|
|
#define CONFIG_SYS_FPGA1_BASE 0xe0000000
|
|
#define CONFIG_SYS_FPGA2_BASE 0xe2000000
|
|
#define CONFIG_SYS_FPGA3_BASE 0xe4000000
|
|
|
|
#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS_L 0xCC000000
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS \
|
|
(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
|
|
| (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
|
|
|
|
#define CONFIG_SYS_OCM_BASE 0xE7000000 /* OCM: 64k */
|
|
#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */
|
|
#define CONFIG_SYS_SRAM_SIZE (256 << 10)
|
|
#define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000
|
|
|
|
/*
|
|
* Initial RAM & stack pointer (placed in OCM)
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10)
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*
|
|
* Serial Port
|
|
*/
|
|
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
/*
|
|
* Define here the location of the environment variables (flash).
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_FLASH /* use flash for environment vars */
|
|
|
|
/*
|
|
* Flash related
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
|
|
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */
|
|
#define CONFIG_SYS_FLASH_PROTECTION /* use hardware flash protection */
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \
|
|
(CONFIG_SYS_FPGA1_BASE + 0x01000000) }
|
|
#define CONFIG_SYS_CFI_FLASH_CONFIG_REGS { 0xffff, /* don't set */ \
|
|
0xbddf } /* set async read mode */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors p. chip*/
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms*/
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms*/
|
|
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buff'd writes (20x faster)*/
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
|
|
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* sector size */
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - \
|
|
CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE 0x4000 /* env sector size */
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
|
|
/*
|
|
* DDR2 SDRAM
|
|
*/
|
|
#define CONFIG_SYS_MBYTES_SDRAM 256
|
|
#define CONFIG_DDR_ECC
|
|
#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
|
|
#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
|
|
#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
|
|
#undef CONFIG_PPC4xx_DDR_METHOD_A
|
|
#define CONFIG_DDR_RFDC_FIXED 0x000001D7 /* optimal value */
|
|
|
|
/* DDR1/2 SDRAM Device Control Register Data Values */
|
|
/* Memory Queue */
|
|
#define CONFIG_SYS_SDRAM_R0BAS (SDRAM_RXBAS_SDBA_ENCODE(0) | \
|
|
SDRAM_RXBAS_SDSZ_256)
|
|
#define CONFIG_SYS_SDRAM_R1BAS 0x00000000
|
|
#define CONFIG_SYS_SDRAM_R2BAS 0x00000000
|
|
#define CONFIG_SYS_SDRAM_R3BAS 0x00000000
|
|
#define CONFIG_SYS_SDRAM_PLBADDULL 0x00000000
|
|
#define CONFIG_SYS_SDRAM_PLBADDUHB 0x00000008
|
|
#define CONFIG_SYS_SDRAM_CONF1LL 0x80001C00
|
|
#define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80
|
|
#define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000
|
|
|
|
#define CAS_LATENCY JEDEC_MA_MR_CL_DDR2_5_0_CLK
|
|
|
|
/* DDR1/2 SDRAM Device Control Register Data Values */
|
|
#define CONFIG_SYS_SDRAM0_MB0CF (SDRAM_RXBAS_SDAM_MODE7 | \
|
|
SDRAM_RXBAS_SDBE_ENABLE)
|
|
#define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
|
|
#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
|
|
#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
|
|
#define CONFIG_SYS_SDRAM0_MCOPT1 (SDRAM_MCOPT1_MCHK_GEN | \
|
|
SDRAM_MCOPT1_PMU_OPEN | \
|
|
SDRAM_MCOPT1_DMWD_32 | \
|
|
SDRAM_MCOPT1_8_BANKS | \
|
|
SDRAM_MCOPT1_DDR2_TYPE | \
|
|
SDRAM_MCOPT1_QDEP | \
|
|
SDRAM_MCOPT1_RWOO_DISABLED | \
|
|
SDRAM_MCOPT1_WOOO_DISABLED | \
|
|
SDRAM_MCOPT1_DREF_NORMAL)
|
|
#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
|
|
#define CONFIG_SYS_SDRAM0_MODT0 SDRAM_MODT_EB0W_ENABLE
|
|
#define CONFIG_SYS_SDRAM0_MODT1 0x00000000
|
|
#define CONFIG_SYS_SDRAM0_MODT2 0x00000000
|
|
#define CONFIG_SYS_SDRAM0_MODT3 0x00000000
|
|
#define CONFIG_SYS_SDRAM0_CODT (SDRAM_CODT_RK0R_ON | \
|
|
SDRAM_CODT_DQS_1_8_V_DDR2 | \
|
|
SDRAM_CODT_IO_NMODE)
|
|
#define CONFIG_SYS_SDRAM0_RTR SDRAM_RTR_RINT_ENCODE(1560)
|
|
#define CONFIG_SYS_SDRAM0_INITPLR0 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(80) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR1 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(3) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR2 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR3 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(0))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR4 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_ENABLE | \
|
|
JEDEC_MA_EMR_RTT_150OHM))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR5 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(200) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
|
|
CAS_LATENCY | \
|
|
JEDEC_MA_MR_BLEN_4 | \
|
|
JEDEC_MA_MR_DLL_RESET))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR6 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(3) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(0x0) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR7 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(26) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR8 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(26) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR9 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(26) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR10 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(26) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR11 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
|
|
CAS_LATENCY | \
|
|
JEDEC_MA_MR_BLEN_4))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR12 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \
|
|
JEDEC_MA_EMR_RDQS_DISABLE | \
|
|
JEDEC_MA_EMR_DQS_ENABLE | \
|
|
JEDEC_MA_EMR_RTT_150OHM | \
|
|
JEDEC_MA_EMR_ODS_NORMAL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR13 \
|
|
(SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \
|
|
JEDEC_MA_EMR_RDQS_DISABLE | \
|
|
JEDEC_MA_EMR_DQS_ENABLE | \
|
|
JEDEC_MA_EMR_RTT_150OHM | \
|
|
JEDEC_MA_EMR_ODS_NORMAL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR14 SDRAM_INITPLR_DISABLE
|
|
#define CONFIG_SYS_SDRAM0_INITPLR15 SDRAM_INITPLR_DISABLE
|
|
#define CONFIG_SYS_SDRAM0_RQDC (SDRAM_RQDC_RQDE_ENABLE | \
|
|
SDRAM_RQDC_RQFD_ENCODE(56))
|
|
#define CONFIG_SYS_SDRAM0_RFDC SDRAM_RFDC_RFFD_ENCODE(599)
|
|
#define CONFIG_SYS_SDRAM0_RDCC (SDRAM_RDCC_RDSS_T2)
|
|
#define CONFIG_SYS_SDRAM0_DLCR (SDRAM_DLCR_DCLM_AUTO | \
|
|
SDRAM_DLCR_DLCS_CONT_DONE | \
|
|
SDRAM_DLCR_DLCV_ENCODE(155))
|
|
#define CONFIG_SYS_SDRAM0_CLKTR SDRAM_CLKTR_CLKP_90_DEG_ADV
|
|
#define CONFIG_SYS_SDRAM0_WRDTR SDRAM_WRDTR_WTR_90_DEG_ADV
|
|
#define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \
|
|
SDRAM_SDTR1_RTW_2_CLK | \
|
|
SDRAM_SDTR1_RTRO_1_CLK)
|
|
#define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK | \
|
|
SDRAM_SDTR2_WTR_2_CLK | \
|
|
SDRAM_SDTR2_XSNR_32_CLK | \
|
|
SDRAM_SDTR2_WPC_4_CLK | \
|
|
SDRAM_SDTR2_RPC_2_CLK | \
|
|
SDRAM_SDTR2_RP_3_CLK | \
|
|
SDRAM_SDTR2_RRD_2_CLK)
|
|
#define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(8) | \
|
|
SDRAM_SDTR3_RC_ENCODE(11) | \
|
|
SDRAM_SDTR3_XCS | \
|
|
SDRAM_SDTR3_RFC_ENCODE(26))
|
|
#define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \
|
|
CAS_LATENCY | \
|
|
SDRAM_MMODE_BLEN_4)
|
|
#define CONFIG_SYS_SDRAM0_MEMODE (SDRAM_MEMODE_DQS_ENABLE | \
|
|
SDRAM_MEMODE_RTT_150OHM)
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed */
|
|
|
|
#define CONFIG_SYS_I2C_MULTI_EEPROMS
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1)
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/* I2C bootstrap EEPROM */
|
|
#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52
|
|
#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
|
|
#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
|
|
|
|
/*
|
|
* Ethernet
|
|
*/
|
|
#define CONFIG_IBM_EMAC4_V4 1
|
|
|
|
#define CONFIG_HAS_ETH0
|
|
|
|
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
|
|
#define CONFIG_M88E1111_PHY
|
|
/* Disable fiber since fiber/copper auto-selection doesn't seem to work */
|
|
#define CONFIG_M88E1111_DISABLE_FIBER
|
|
|
|
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
|
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
|
|
#define CONFIG_PHY_DYNAMIC_ANEG 1
|
|
|
|
/*
|
|
* Default environment variables
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_AMCC_DEF_ENV \
|
|
CONFIG_AMCC_DEF_ENV_POWERPC \
|
|
CONFIG_AMCC_DEF_ENV_NOR_UPD \
|
|
"kernel_addr=fc000000\0" \
|
|
"fdt_addr=fc1e0000\0" \
|
|
"ramdisk_addr=fc200000\0" \
|
|
"pciconfighost=1\0" \
|
|
"pcie_mode=RP:RP\0" \
|
|
"unlock=yes\0" \
|
|
""
|
|
|
|
/*
|
|
* Commands additional to the ones defined in amcc-common.h
|
|
*/
|
|
#define CONFIG_CMD_CHIP_CONFIG
|
|
#define CONFIG_CMD_ECCTEST
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_SDRAM
|
|
|
|
/*
|
|
* PCI stuff
|
|
*/
|
|
/* General PCI */
|
|
#define CONFIG_PCI /* include pci support */
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
|
|
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
|
|
|
|
/* Board-specific PCI, no PCI support, only PCIe */
|
|
#undef CONFIG_SYS_PCI_TARGET_INIT
|
|
#undef CONFIG_SYS_PCI_MASTER_INIT
|
|
|
|
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
|
|
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
|
|
|
|
|
|
/*
|
|
* External Bus Controller (EBC) Setup
|
|
*/
|
|
|
|
/*
|
|
* T3CORP has 64MBytes of NOR flash (Spansion 29GL512), but the
|
|
* boot EBC mapping only supports a maximum of 16MBytes
|
|
* (4.ff00.0000 - 4.ffff.ffff).
|
|
* To solve this problem, the flash has to get remapped to another
|
|
* EBC address which accepts bigger regions:
|
|
*
|
|
* 0xfc00.0000 -> 4.cc00.0000
|
|
*/
|
|
|
|
/* Memory Bank 0 (NOR-flash) */
|
|
#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \
|
|
EBC_BXAP_TWT_ENCODE(16) | \
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
EBC_BXAP_CSN_ENCODE(1) | \
|
|
EBC_BXAP_OEN_ENCODE(1) | \
|
|
EBC_BXAP_WBN_ENCODE(1) | \
|
|
EBC_BXAP_WBF_ENCODE(1) | \
|
|
EBC_BXAP_TH_ENCODE(7) | \
|
|
EBC_BXAP_RE_DISABLED | \
|
|
EBC_BXAP_SOR_DELAYED | \
|
|
EBC_BXAP_BEM_WRITEONLY | \
|
|
EBC_BXAP_PEN_DISABLED)
|
|
#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_BOOT_BASE_ADDR) | \
|
|
EBC_BXCR_BS_16MB | \
|
|
EBC_BXCR_BU_RW | \
|
|
EBC_BXCR_BW_16BIT)
|
|
|
|
/* Memory Bank 1 (FPGA 1) */
|
|
#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \
|
|
EBC_BXAP_TWT_ENCODE(5) | \
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
EBC_BXAP_OEN_ENCODE(3) | \
|
|
EBC_BXAP_WBN_ENCODE(0) | \
|
|
EBC_BXAP_WBF_ENCODE(0) | \
|
|
EBC_BXAP_TH_ENCODE(1) | \
|
|
EBC_BXAP_RE_ENABLED | \
|
|
EBC_BXAP_SOR_DELAYED | \
|
|
EBC_BXAP_BEM_RW | \
|
|
EBC_BXAP_PEN_DISABLED)
|
|
#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
|
|
EBC_BXCR_BS_32MB | \
|
|
EBC_BXCR_BU_RW | \
|
|
EBC_BXCR_BW_32BIT)
|
|
|
|
/* Memory Bank 2 (FPGA 2) */
|
|
#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \
|
|
EBC_BXAP_TWT_ENCODE(5) | \
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
EBC_BXAP_OEN_ENCODE(3) | \
|
|
EBC_BXAP_WBN_ENCODE(0) | \
|
|
EBC_BXAP_WBF_ENCODE(0) | \
|
|
EBC_BXAP_TH_ENCODE(1) | \
|
|
EBC_BXAP_RE_ENABLED | \
|
|
EBC_BXAP_SOR_DELAYED | \
|
|
EBC_BXAP_BEM_RW | \
|
|
EBC_BXAP_PEN_DISABLED)
|
|
#define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \
|
|
EBC_BXCR_BS_16MB | \
|
|
EBC_BXCR_BU_RW | \
|
|
EBC_BXCR_BW_32BIT)
|
|
|
|
/* Memory Bank 3 (FPGA 3) */
|
|
#define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_DISABLED | \
|
|
EBC_BXAP_TWT_ENCODE(5) | \
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
EBC_BXAP_OEN_ENCODE(3) | \
|
|
EBC_BXAP_WBN_ENCODE(0) | \
|
|
EBC_BXAP_WBF_ENCODE(0) | \
|
|
EBC_BXAP_TH_ENCODE(1) | \
|
|
EBC_BXAP_RE_ENABLED | \
|
|
EBC_BXAP_SOR_DELAYED | \
|
|
EBC_BXAP_BEM_RW | \
|
|
EBC_BXAP_PEN_DISABLED)
|
|
#define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \
|
|
EBC_BXCR_BS_16MB | \
|
|
EBC_BXCR_BU_RW | \
|
|
EBC_BXCR_BW_32BIT)
|
|
|
|
/*
|
|
* PPC4xx GPIO Configuration
|
|
*/
|
|
|
|
#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \
|
|
{ \
|
|
/* GPIO Core 0 */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
|
|
{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
|
|
{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
|
|
}, \
|
|
{ \
|
|
/* GPIO Core 1 */ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
|
|
{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
|
|
{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
|
|
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
|
|
} \
|
|
}
|
|
|
|
#endif /* __CONFIG_H */
|