mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-13 00:03:26 +09:00
![Hannes Petermaier](/assets/img/avatar_default.png)
At this time I2C and responsible pin-mux is setup during PMIC initialziation within common.c, this is possible because today PMIC is always connected on I2C0. In Future this will be changed, PMIC isn't anymore connected to bus0 in call cases. So we do following: - rename enable_i2c_pin_mux0 to enable_i2c_pin_mux to be generic for enabling pin-mux on different or more busses. - move the call to i2c_pin_mux and i2c_init from common.c to the specific board.c Signed-off-by: Hannes Petermaier <hannes.petermaier@br-automation.com> Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
249 lines
10 KiB
C
249 lines
10 KiB
C
/*
|
|
* mux.c
|
|
*
|
|
* Pinmux Setting for B&R LEIT Board(s)
|
|
*
|
|
* Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
|
|
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/io.h>
|
|
#include <i2c.h>
|
|
|
|
static struct module_pin_mux uart0_pin_mux[] = {
|
|
/* UART0_CTS */
|
|
{OFFSET(uart0_ctsn), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* UART0_RXD */
|
|
{OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* UART0_TXD */
|
|
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
|
|
{-1},
|
|
};
|
|
static struct module_pin_mux uart1_pin_mux[] = {
|
|
/* UART0_RXD */
|
|
{OFFSET(uart1_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* UART0_TXD */
|
|
{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
|
|
{-1},
|
|
};
|
|
#ifdef CONFIG_MMC
|
|
static struct module_pin_mux mmc1_pin_mux[] = {
|
|
{OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT7 */
|
|
{OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT6 */
|
|
{OFFSET(gpmc_ad5), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT5 */
|
|
{OFFSET(gpmc_ad4), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT4 */
|
|
|
|
{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */
|
|
{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */
|
|
{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */
|
|
{OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */
|
|
{OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CLK */
|
|
{OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */
|
|
{OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUP_EN)}, /* MMC1_WP */
|
|
{OFFSET(gpmc_advn_ale), (MODE(7) | RXACTIVE | PULLUP_EN)},/* MMC1_CD */
|
|
{-1},
|
|
};
|
|
#endif
|
|
static struct module_pin_mux i2c0_pin_mux[] = {
|
|
/* I2C_DATA */
|
|
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
|
|
/* I2C_SCLK */
|
|
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
|
|
{-1},
|
|
};
|
|
|
|
static struct module_pin_mux spi0_pin_mux[] = {
|
|
/* SPI0_SCLK */
|
|
{OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)},
|
|
/* SPI0_D0 */
|
|
{OFFSET(spi0_d0), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)},
|
|
/* SPI0_D1 */
|
|
{OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)},
|
|
/* SPI0_CS0 */
|
|
{OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | PULLUDEN | PULLUP_EN)},
|
|
{-1},
|
|
};
|
|
|
|
static struct module_pin_mux mii1_pin_mux[] = {
|
|
{OFFSET(mii1_crs), MODE(0) | RXACTIVE}, /* MII1_CRS */
|
|
{OFFSET(mii1_col), MODE(0) | RXACTIVE}, /* MII1_COL */
|
|
{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, /* MII1_RXERR */
|
|
{OFFSET(mii1_txen), MODE(0)}, /* MII1_TXEN */
|
|
{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, /* MII1_RXDV */
|
|
{OFFSET(mii1_txd3), MODE(0)}, /* MII1_TXD3 */
|
|
{OFFSET(mii1_txd2), MODE(0)}, /* MII1_TXD2 */
|
|
{OFFSET(mii1_txd1), MODE(0)}, /* MII1_TXD1 */
|
|
{OFFSET(mii1_txd0), MODE(0)}, /* MII1_TXD0 */
|
|
{OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, /* MII1_TXCLK */
|
|
{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, /* MII1_RXCLK */
|
|
{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, /* MII1_RXD3 */
|
|
{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, /* MII1_RXD2 */
|
|
{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, /* MII1_RXD1 */
|
|
{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, /* MII1_RXD0 */
|
|
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
|
|
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
|
|
{-1},
|
|
};
|
|
|
|
static struct module_pin_mux mii2_pin_mux[] = {
|
|
{OFFSET(gpmc_a0), MODE(1)}, /* MII2_TXEN */
|
|
{OFFSET(gpmc_a1), MODE(1) | RXACTIVE}, /* MII2_RXDV */
|
|
{OFFSET(gpmc_a2), MODE(1)}, /* MII2_TXD3 */
|
|
{OFFSET(gpmc_a3), MODE(1)}, /* MII2_TXD2 */
|
|
{OFFSET(gpmc_a4), MODE(1)}, /* MII2_TXD1 */
|
|
{OFFSET(gpmc_a5), MODE(1)}, /* MII2_TXD0 */
|
|
{OFFSET(gpmc_a6), MODE(1) | RXACTIVE}, /* MII2_TXCLK */
|
|
{OFFSET(gpmc_a7), MODE(1) | RXACTIVE}, /* MII2_RXCLK */
|
|
{OFFSET(gpmc_a8), MODE(1) | RXACTIVE}, /* MII2_RXD3 */
|
|
{OFFSET(gpmc_a9), MODE(1) | RXACTIVE}, /* MII2_RXD2 */
|
|
{OFFSET(gpmc_a10), MODE(1) | RXACTIVE}, /* MII2_RXD1 */
|
|
{OFFSET(gpmc_a11), MODE(1) | RXACTIVE}, /* MII2_RXD0 */
|
|
{OFFSET(gpmc_wpn), (MODE(1) | RXACTIVE)},/* MII2_RXERR */
|
|
{OFFSET(gpmc_wait0), (MODE(1) | RXACTIVE | PULLUP_EN)},
|
|
/*
|
|
* MII2_CRS is shared with
|
|
* NAND_WAIT0
|
|
*/
|
|
{OFFSET(gpmc_be1n), (MODE(1) | RXACTIVE)},/* MII1_COL */
|
|
{-1},
|
|
};
|
|
#ifdef CONFIG_NAND
|
|
static struct module_pin_mux nand_pin_mux[] = {
|
|
{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
|
|
{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
|
|
{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
|
|
{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
|
|
{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
|
|
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
|
|
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
|
|
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
|
|
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
|
|
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
|
|
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
|
|
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
|
|
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
|
|
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
|
|
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
|
|
{-1},
|
|
};
|
|
#endif
|
|
static struct module_pin_mux gpIOs[] = {
|
|
/* GPIO0_6 (SPI0_CS1) - 3v3_PWR_nEN (Display Power Supply) */
|
|
{OFFSET(spi0_cs1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* TIMER5 (MMC0_DAT3) - TIMER5 (Buzzer) */
|
|
{OFFSET(mmc0_dat3), (MODE(3) | PULLUDEN | RXACTIVE)},
|
|
/* TIMER6 (MMC0_DAT2) - PWM_BACK_3V3 */
|
|
{OFFSET(mmc0_dat2), (MODE(3) | PULLUDEN | RXACTIVE)},
|
|
/* GPIO2_28 (MMC0_DAT1) - MII_nNAND */
|
|
{OFFSET(mmc0_dat1), (MODE(7) | PULLUDEN | RXACTIVE)},
|
|
/* GPIO2_29 (MMC0_DAT0) - NAND_1n0 */
|
|
{OFFSET(mmc0_dat0), (MODE(7) | PULLUDEN | RXACTIVE)},
|
|
/* GPIO2_30 (MMC0_CLK) - nRESET (PHY) */
|
|
{OFFSET(mmc0_clk), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* GPIO3_18 (MCASP0_ACLKR) - CPLD JTAG TDI */
|
|
{OFFSET(mcasp0_aclkr), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* GPIO3_19 (MCASP0_FSR) - CPLD JTAG TMS */
|
|
{OFFSET(mcasp0_fsr), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* GPIO3_20 (MCASP0_AXR1) - CPLD JTAG TCK */
|
|
{OFFSET(mcasp0_axr1), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* GPIO3_21 (MCASP0_AHCLKX) - CPLD JTAG TDO */
|
|
{OFFSET(mcasp0_ahclkx), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* GPIO2_0 (GPMC_nCS3) - DCOK */
|
|
{OFFSET(gpmc_csn3), (MODE(7) | PULLUDDIS | RXACTIVE) },
|
|
/* GPIO0_29 (RMII1_REFCLK) - eMMC nRST */
|
|
{OFFSET(rmii1_refclk), (MODE(7) | PULLUDDIS | RXACTIVE) },
|
|
/*
|
|
* GPIO0_7 (PWW0 OUT)
|
|
* DISPLAY_ONOFF (Backlight Enable at LVDS Versions)
|
|
*/
|
|
{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN | RXACTIVE)},
|
|
/* GPIO0_19 (DMA_INTR0) - DISPLAY_MODE (CPLD) */
|
|
{OFFSET(xdma_event_intr0), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
|
|
/* GPIO0_20 (DMA_INTR1) - REP-Switch */
|
|
{OFFSET(xdma_event_intr1), (MODE(7) | PULLUP_EN | RXACTIVE)},
|
|
/* GPIO3_14 (MCASP0_ACLKX) - frei / PP709 */
|
|
{OFFSET(mcasp0_aclkx), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE) },
|
|
/* GPIO3_15 (MCASP0_FSX) - PMIC_nRESET */
|
|
{OFFSET(mcasp0_fsx), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE) },
|
|
/* GPIO3_16 (MCASP0_AXR0) - ETH1_LEDY */
|
|
{OFFSET(mcasp0_axr0), (MODE(7) | PULLUDDIS) },
|
|
/* GPIO3_17 (MCASP0_AHCLKR) - ETH2_LEDY */
|
|
{OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS) },
|
|
#ifndef CONFIG_NAND
|
|
/* GPIO2_3 - NAND_OE */
|
|
{OFFSET(gpmc_oen_ren), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
|
|
/* GPIO2_4 - NAND_WEN */
|
|
{OFFSET(gpmc_wen), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
|
|
/* GPIO2_5 - NAND_BE_CLE */
|
|
{OFFSET(gpmc_be0n_cle), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
|
|
#endif
|
|
{-1},
|
|
};
|
|
|
|
static struct module_pin_mux lcd_pin_mux[] = {
|
|
{OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD-Data(0) */
|
|
{OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD-Data(1) */
|
|
{OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD-Data(2) */
|
|
{OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD-Data(3) */
|
|
{OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD-Data(4) */
|
|
{OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD-Data(5) */
|
|
{OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD-Data(6) */
|
|
{OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD-Data(7) */
|
|
{OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD-Data(8) */
|
|
{OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD-Data(9) */
|
|
{OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD-Data(10) */
|
|
{OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD-Data(11) */
|
|
{OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD-Data(12) */
|
|
{OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD-Data(13) */
|
|
{OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD-Data(14) */
|
|
{OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD-Data(15) */
|
|
|
|
{OFFSET(gpmc_ad8), (MODE(1) | PULLUDDIS)}, /* LCD-Data(16) */
|
|
{OFFSET(gpmc_ad9), (MODE(1) | PULLUDDIS)}, /* LCD-Data(17) */
|
|
{OFFSET(gpmc_ad10), (MODE(1) | PULLUDDIS)}, /* LCD-Data(18) */
|
|
{OFFSET(gpmc_ad11), (MODE(1) | PULLUDDIS)}, /* LCD-Data(19) */
|
|
{OFFSET(gpmc_ad12), (MODE(1) | PULLUDDIS)}, /* LCD-Data(20) */
|
|
{OFFSET(gpmc_ad13), (MODE(1) | PULLUDDIS)}, /* LCD-Data(21) */
|
|
{OFFSET(gpmc_ad14), (MODE(1) | PULLUDDIS)}, /* LCD-Data(22) */
|
|
{OFFSET(gpmc_ad15), (MODE(1) | PULLUDDIS)}, /* LCD-Data(23) */
|
|
|
|
{OFFSET(lcd_vsync), (MODE(0) | PULLUDDIS)}, /* LCD-VSync */
|
|
{OFFSET(lcd_hsync), (MODE(0) | PULLUDDIS)}, /* LCD-HSync */
|
|
{OFFSET(lcd_ac_bias_en), (MODE(0) | PULLUDDIS)},/* LCD-DE */
|
|
{OFFSET(lcd_pclk), (MODE(0) | PULLUDDIS)}, /* LCD-CLK */
|
|
|
|
{-1},
|
|
};
|
|
|
|
void enable_uart0_pin_mux(void)
|
|
{
|
|
configure_module_pin_mux(uart0_pin_mux);
|
|
}
|
|
|
|
void enable_i2c_pin_mux(void)
|
|
{
|
|
configure_module_pin_mux(i2c0_pin_mux);
|
|
}
|
|
|
|
void enable_board_pin_mux(void)
|
|
{
|
|
configure_module_pin_mux(i2c0_pin_mux);
|
|
configure_module_pin_mux(mii1_pin_mux);
|
|
configure_module_pin_mux(mii2_pin_mux);
|
|
#ifdef CONFIG_NAND
|
|
configure_module_pin_mux(nand_pin_mux);
|
|
#elif defined(CONFIG_MMC)
|
|
configure_module_pin_mux(mmc1_pin_mux);
|
|
#endif
|
|
configure_module_pin_mux(spi0_pin_mux);
|
|
configure_module_pin_mux(lcd_pin_mux);
|
|
configure_module_pin_mux(uart1_pin_mux);
|
|
configure_module_pin_mux(gpIOs);
|
|
}
|