mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
60559d3575
Booting a mainline kernel in secure mode on i.MX7D causes only one CPU to be brought up. Change it to booting in non secure mode by default, which allows the two CPUs to be brought up. It does have a side effect of not probing the CAAM driver. If CAAM driver is needed then a secure world OS such as OPTEE needs to be used. Signed-off-by: Fabio Estevam <festevam@gmail.com>
93 lines
2.2 KiB
Plaintext
93 lines
2.2 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_MX7=y
|
|
CONFIG_SYS_TEXT_BASE=0x87800000
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_ENV_OFFSET=0xC0000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_TARGET_MX7DSABRESD=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
# CONFIG_ARMV7_VIRT is not set
|
|
CONFIG_IMX_RDC=y
|
|
CONFIG_IMX_BOOTAUX=y
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7dsabresd/imximage.cfg"
|
|
CONFIG_BOOTCOMMAND="run finduuid; run distro_bootcmd"
|
|
# CONFIG_CONSOLE_MUX is not set
|
|
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
|
CONFIG_BOUNCE_BUFFER=y
|
|
# CONFIG_CMD_BOOTD is not set
|
|
# CONFIG_BOOTM_NETBSD is not set
|
|
# CONFIG_BOOTM_PLAN9 is not set
|
|
# CONFIG_BOOTM_RTEMS is not set
|
|
# CONFIG_CMD_IMI is not set
|
|
# CONFIG_CMD_XIMG is not set
|
|
# CONFIG_CMD_EXPORTENV is not set
|
|
# CONFIG_CMD_IMPORTENV is not set
|
|
CONFIG_CMD_MEMTEST=y
|
|
CONFIG_CMD_DFU=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
CONFIG_CMD_BMP=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_PMIC=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
# CONFIG_ISO_PARTITION is not set
|
|
# CONFIG_EFI_PARTITION is not set
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="imx7d-sdb-qspi"
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_DFU_MMC=y
|
|
CONFIG_DFU_RAM=y
|
|
CONFIG_DM_74X164=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_DM_MMC=y
|
|
CONFIG_SUPPORT_EMMC_BOOT=y
|
|
CONFIG_MMC_IO_VOLTAGE=y
|
|
CONFIG_MMC_UHS_SUPPORT=y
|
|
CONFIG_MMC_HS200_SUPPORT=y
|
|
CONFIG_FSL_USDHC=y
|
|
CONFIG_MTD=y
|
|
CONFIG_DM_SPI_FLASH=y
|
|
CONFIG_SF_DEFAULT_MODE=0
|
|
CONFIG_SF_DEFAULT_SPEED=40000000
|
|
CONFIG_SPI_FLASH_EON=y
|
|
CONFIG_SPI_FLASH_MACRONIX=y
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_BROADCOM=y
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_DM_MDIO=y
|
|
CONFIG_DM_MDIO_MUX=y
|
|
CONFIG_FEC_MXC=y
|
|
CONFIG_RGMII=y
|
|
CONFIG_MII=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_IMX7=y
|
|
CONFIG_DM_PMIC=y
|
|
CONFIG_DM_PMIC_PFUZE100=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_PFUZE100=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_SOFT_SPI=y
|
|
CONFIG_FSL_QSPI=y
|
|
CONFIG_USB=y
|
|
CONFIG_DM_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_MXC_USB_OTG_HACTIVE=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="FSL"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
|
|
CONFIG_CI_UDC=y
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_VIDEO=y
|
|
CONFIG_ERRNO_STR=y
|