u-boot-brain/drivers/mtd/spi/stmicro.c
Mike Frysinger 9726ba4aba sf: stmicro: drop redundant id read
The common SPI flash code reads the idcode and passes it down to the SPI
flash driver, so there is no need to read it again ourselves.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
CC: Jason McMullan <mcmullan@netapp.com>
CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
2009-04-02 06:50:17 -04:00

352 lines
8.3 KiB
C

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright 2008, Network Appliance Inc.
* Jason McMullan <mcmullan@netapp.com>
*
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <spi_flash.h>
#include "spi_flash_internal.h"
/* M25Pxx-specific commands */
#define CMD_M25PXX_WREN 0x06 /* Write Enable */
#define CMD_M25PXX_WRDI 0x04 /* Write Disable */
#define CMD_M25PXX_RDSR 0x05 /* Read Status Register */
#define CMD_M25PXX_WRSR 0x01 /* Write Status Register */
#define CMD_M25PXX_READ 0x03 /* Read Data Bytes */
#define CMD_M25PXX_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */
#define CMD_M25PXX_PP 0x02 /* Page Program */
#define CMD_M25PXX_SE 0xd8 /* Sector Erase */
#define CMD_M25PXX_BE 0xc7 /* Bulk Erase */
#define CMD_M25PXX_DP 0xb9 /* Deep Power-down */
#define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */
#define STM_ID_M25P16 0x15
#define STM_ID_M25P20 0x12
#define STM_ID_M25P32 0x16
#define STM_ID_M25P40 0x13
#define STM_ID_M25P64 0x17
#define STM_ID_M25P80 0x14
#define STM_ID_M25P128 0x18
#define STMICRO_SR_WIP (1 << 0) /* Write-in-Progress */
struct stmicro_spi_flash_params {
u8 idcode1;
u16 page_size;
u16 pages_per_sector;
u16 nr_sectors;
const char *name;
};
/* spi_flash needs to be first so upper layers can free() it */
struct stmicro_spi_flash {
struct spi_flash flash;
const struct stmicro_spi_flash_params *params;
};
static inline struct stmicro_spi_flash *to_stmicro_spi_flash(struct spi_flash
*flash)
{
return container_of(flash, struct stmicro_spi_flash, flash);
}
static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = {
{
.idcode1 = STM_ID_M25P16,
.page_size = 256,
.pages_per_sector = 256,
.nr_sectors = 32,
.name = "M25P16",
},
{
.idcode1 = STM_ID_M25P20,
.page_size = 256,
.pages_per_sector = 256,
.nr_sectors = 4,
.name = "M25P20",
},
{
.idcode1 = STM_ID_M25P32,
.page_size = 256,
.pages_per_sector = 256,
.nr_sectors = 64,
.name = "M25P32",
},
{
.idcode1 = STM_ID_M25P40,
.page_size = 256,
.pages_per_sector = 256,
.nr_sectors = 8,
.name = "M25P40",
},
{
.idcode1 = STM_ID_M25P64,
.page_size = 256,
.pages_per_sector = 256,
.nr_sectors = 128,
.name = "M25P64",
},
{
.idcode1 = STM_ID_M25P80,
.page_size = 256,
.pages_per_sector = 256,
.nr_sectors = 16,
.name = "M25P80",
},
{
.idcode1 = STM_ID_M25P128,
.page_size = 256,
.pages_per_sector = 1024,
.nr_sectors = 64,
.name = "M25P128",
},
};
static int stmicro_wait_ready(struct spi_flash *flash, unsigned long timeout)
{
struct spi_slave *spi = flash->spi;
unsigned long timebase;
int ret;
u8 status;
u8 cmd[4] = { CMD_M25PXX_RDSR, 0xff, 0xff, 0xff };
ret = spi_xfer(spi, 32, &cmd[0], NULL, SPI_XFER_BEGIN);
if (ret) {
debug("SF: Failed to send command %02x: %d\n", cmd[0], ret);
return ret;
}
timebase = get_timer(0);
do {
ret = spi_xfer(spi, 8, NULL, &status, 0);
if (ret)
return -1;
if ((status & STMICRO_SR_WIP) == 0)
break;
} while (get_timer(timebase) < timeout);
spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
if ((status & STMICRO_SR_WIP) == 0)
return 0;
/* Timed out */
return -1;
}
static int stmicro_read_fast(struct spi_flash *flash,
u32 offset, size_t len, void *buf)
{
struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
unsigned long page_addr;
unsigned long page_size;
u8 cmd[5];
page_size = stm->params->page_size;
page_addr = offset / page_size;
cmd[0] = CMD_READ_ARRAY_FAST;
cmd[1] = page_addr >> 8;
cmd[2] = page_addr;
cmd[3] = offset % page_size;
cmd[4] = 0x00;
return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
}
static int stmicro_write(struct spi_flash *flash,
u32 offset, size_t len, const void *buf)
{
struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
unsigned long page_addr;
unsigned long byte_addr;
unsigned long page_size;
size_t chunk_len;
size_t actual;
int ret;
u8 cmd[4];
page_size = stm->params->page_size;
page_addr = offset / page_size;
byte_addr = offset % page_size;
ret = spi_claim_bus(flash->spi);
if (ret) {
debug("SF: Unable to claim SPI bus\n");
return ret;
}
ret = 0;
for (actual = 0; actual < len; actual += chunk_len) {
chunk_len = min(len - actual, page_size - byte_addr);
cmd[0] = CMD_M25PXX_PP;
cmd[1] = page_addr >> 8;
cmd[2] = page_addr;
cmd[3] = byte_addr;
debug
("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %d\n",
buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
if (ret < 0) {
debug("SF: Enabling Write failed\n");
break;
}
ret = spi_flash_cmd_write(flash->spi, cmd, 4,
buf + actual, chunk_len);
if (ret < 0) {
debug("SF: STMicro Page Program failed\n");
break;
}
ret = stmicro_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
if (ret < 0) {
debug("SF: STMicro page programming timed out\n");
break;
}
page_addr++;
byte_addr = 0;
}
debug("SF: STMicro: Successfully programmed %u bytes @ 0x%x\n",
len, offset);
spi_release_bus(flash->spi);
return ret;
}
int stmicro_erase(struct spi_flash *flash, u32 offset, size_t len)
{
struct stmicro_spi_flash *stm = to_stmicro_spi_flash(flash);
unsigned long sector_size;
size_t actual;
int ret;
u8 cmd[4];
/*
* This function currently uses sector erase only.
* probably speed things up by using bulk erase
* when possible.
*/
sector_size = stm->params->page_size * stm->params->pages_per_sector;
if (offset % sector_size || len % sector_size) {
debug("SF: Erase offset/length not multiple of sector size\n");
return -1;
}
len /= sector_size;
cmd[0] = CMD_M25PXX_SE;
cmd[2] = 0x00;
cmd[3] = 0x00;
ret = spi_claim_bus(flash->spi);
if (ret) {
debug("SF: Unable to claim SPI bus\n");
return ret;
}
ret = 0;
for (actual = 0; actual < len; actual++) {
cmd[1] = (offset / sector_size) + actual;
ret = spi_flash_cmd(flash->spi, CMD_M25PXX_WREN, NULL, 0);
if (ret < 0) {
debug("SF: Enabling Write failed\n");
break;
}
ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
if (ret < 0) {
debug("SF: STMicro page erase failed\n");
break;
}
/* Up to 2 seconds */
ret = stmicro_wait_ready(flash, 2 * CONFIG_SYS_HZ);
if (ret < 0) {
debug("SF: STMicro page erase timed out\n");
break;
}
}
debug("SF: STMicro: Successfully erased %u bytes @ 0x%x\n",
len * sector_size, offset);
spi_release_bus(flash->spi);
return ret;
}
struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode)
{
const struct stmicro_spi_flash_params *params;
struct stmicro_spi_flash *stm;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) {
params = &stmicro_spi_flash_table[i];
if (params->idcode1 == idcode[2]) {
break;
}
}
if (i == ARRAY_SIZE(stmicro_spi_flash_table)) {
debug("SF: Unsupported STMicro ID %02x\n", idcode[1]);
return NULL;
}
stm = malloc(sizeof(struct stmicro_spi_flash));
if (!stm) {
debug("SF: Failed to allocate memory\n");
return NULL;
}
stm->params = params;
stm->flash.spi = spi;
stm->flash.name = params->name;
stm->flash.write = stmicro_write;
stm->flash.erase = stmicro_erase;
stm->flash.read = stmicro_read_fast;
stm->flash.size = params->page_size * params->pages_per_sector
* params->nr_sectors;
debug("SF: Detected %s with page size %u, total %u bytes\n",
params->name, params->page_size, stm->flash.size);
return &stm->flash;
}