mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-06 11:16:15 +09:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
444 lines
12 KiB
C
444 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Vitesse PHY drivers
|
|
*
|
|
* Copyright 2010-2014 Freescale Semiconductor, Inc.
|
|
* Original Author: Andy Fleming
|
|
* Add vsc8662 phy support - Priyanka Jain
|
|
*/
|
|
#include <miiphy.h>
|
|
|
|
/* Cicada Auxiliary Control/Status Register */
|
|
#define MIIM_CIS82xx_AUX_CONSTAT 0x1c
|
|
#define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004
|
|
#define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020
|
|
#define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018
|
|
#define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010
|
|
#define MIIM_CIS82xx_AUXCONSTAT_100 0x0008
|
|
|
|
/* Cicada Extended Control Register 1 */
|
|
#define MIIM_CIS82xx_EXT_CON1 0x17
|
|
#define MIIM_CIS8201_EXTCON1_INIT 0x0000
|
|
|
|
/* Cicada 8204 Extended PHY Control Register 1 */
|
|
#define MIIM_CIS8204_EPHY_CON 0x17
|
|
#define MIIM_CIS8204_EPHYCON_INIT 0x0006
|
|
#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
|
|
|
|
/* Cicada 8204 Serial LED Control Register */
|
|
#define MIIM_CIS8204_SLED_CON 0x1b
|
|
#define MIIM_CIS8204_SLEDCON_INIT 0x1115
|
|
|
|
/* Vitesse VSC8601 Extended PHY Control Register 1 */
|
|
#define MII_VSC8601_EPHY_CTL 0x17
|
|
#define MII_VSC8601_EPHY_CTL_RGMII_SKEW (1 << 8)
|
|
|
|
#define PHY_EXT_PAGE_ACCESS 0x1f
|
|
#define PHY_EXT_PAGE_ACCESS_GENERAL 0x10
|
|
#define PHY_EXT_PAGE_ACCESS_EXTENDED3 0x3
|
|
|
|
/* Vitesse VSC8574 control register */
|
|
#define MIIM_VSC8574_MAC_SERDES_CON 0x10
|
|
#define MIIM_VSC8574_MAC_SERDES_ANEG 0x80
|
|
#define MIIM_VSC8574_GENERAL18 0x12
|
|
#define MIIM_VSC8574_GENERAL19 0x13
|
|
|
|
/* Vitesse VSC8574 gerenal purpose register 18 */
|
|
#define MIIM_VSC8574_18G_SGMII 0x80f0
|
|
#define MIIM_VSC8574_18G_QSGMII 0x80e0
|
|
#define MIIM_VSC8574_18G_CMDSTAT 0x8000
|
|
|
|
/* Vitesse VSC8514 control register */
|
|
#define MIIM_VSC8514_MAC_SERDES_CON 0x10
|
|
#define MIIM_VSC8514_GENERAL18 0x12
|
|
#define MIIM_VSC8514_GENERAL19 0x13
|
|
#define MIIM_VSC8514_GENERAL23 0x17
|
|
|
|
/* Vitesse VSC8514 gerenal purpose register 18 */
|
|
#define MIIM_VSC8514_18G_QSGMII 0x80e0
|
|
#define MIIM_VSC8514_18G_CMDSTAT 0x8000
|
|
|
|
/* Vitesse VSC8664 Control/Status Register */
|
|
#define MIIM_VSC8664_SERDES_AND_SIGDET 0x13
|
|
#define MIIM_VSC8664_ADDITIONAL_DEV 0x16
|
|
#define MIIM_VSC8664_EPHY_CON 0x17
|
|
#define MIIM_VSC8664_LED_CON 0x1E
|
|
|
|
#define PHY_EXT_PAGE_ACCESS_EXTENDED 0x0001
|
|
|
|
/* CIS8201 */
|
|
static int vitesse_config(struct phy_device *phydev)
|
|
{
|
|
/* Override PHY config settings */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
|
|
MIIM_CIS82xx_AUXCONSTAT_INIT);
|
|
/* Set up the interface mode */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1,
|
|
MIIM_CIS8201_EXTCON1_INIT);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vitesse_parse_status(struct phy_device *phydev)
|
|
{
|
|
int speed;
|
|
int mii_reg;
|
|
|
|
mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT);
|
|
|
|
if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX)
|
|
phydev->duplex = DUPLEX_FULL;
|
|
else
|
|
phydev->duplex = DUPLEX_HALF;
|
|
|
|
speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED;
|
|
switch (speed) {
|
|
case MIIM_CIS82xx_AUXCONSTAT_GBIT:
|
|
phydev->speed = SPEED_1000;
|
|
break;
|
|
case MIIM_CIS82xx_AUXCONSTAT_100:
|
|
phydev->speed = SPEED_100;
|
|
break;
|
|
default:
|
|
phydev->speed = SPEED_10;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vitesse_startup(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = genphy_update_link(phydev);
|
|
if (ret)
|
|
return ret;
|
|
return vitesse_parse_status(phydev);
|
|
}
|
|
|
|
static int cis8204_config(struct phy_device *phydev)
|
|
{
|
|
/* Override PHY config settings */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
|
|
MIIM_CIS82xx_AUXCONSTAT_INIT);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
if (phy_interface_is_rgmii(phydev))
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
|
|
MIIM_CIS8204_EPHYCON_INIT |
|
|
MIIM_CIS8204_EPHYCON_RGMII);
|
|
else
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
|
|
MIIM_CIS8204_EPHYCON_INIT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Vitesse VSC8601 */
|
|
/* This adds a skew for both TX and RX clocks, so the skew should only be
|
|
* applied to "rgmii-id" interfaces. It may not work as expected
|
|
* on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */
|
|
static int vsc8601_add_skew(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_read(phydev, MDIO_DEVAD_NONE, MII_VSC8601_EPHY_CTL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW;
|
|
return phy_write(phydev, MDIO_DEVAD_NONE, MII_VSC8601_EPHY_CTL, ret);
|
|
}
|
|
|
|
static int vsc8601_config(struct phy_device *phydev)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
|
|
ret = vsc8601_add_skew(phydev);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int vsc8574_config(struct phy_device *phydev)
|
|
{
|
|
u32 val;
|
|
/* configure register 19G for MAC */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
|
|
PHY_EXT_PAGE_ACCESS_GENERAL);
|
|
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19);
|
|
if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
|
|
/* set bit 15:14 to '01' for QSGMII mode */
|
|
val = (val & 0x3fff) | (1 << 14);
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_VSC8574_GENERAL19, val);
|
|
/* Enable 4 ports MAC QSGMII */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
|
|
MIIM_VSC8574_18G_QSGMII);
|
|
} else {
|
|
/* set bit 15:14 to '00' for SGMII mode */
|
|
val = val & 0x3fff;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val);
|
|
/* Enable 4 ports MAC SGMII */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18,
|
|
MIIM_VSC8574_18G_SGMII);
|
|
}
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
|
|
/* When bit 15 is cleared the command has completed */
|
|
while (val & MIIM_VSC8574_18G_CMDSTAT)
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18);
|
|
|
|
/* Enable Serdes Auto-negotiation */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
|
|
PHY_EXT_PAGE_ACCESS_EXTENDED3);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON);
|
|
val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vsc8514_config(struct phy_device *phydev)
|
|
{
|
|
u32 val;
|
|
int timeout = 1000000;
|
|
|
|
/* configure register to access 19G */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
|
|
PHY_EXT_PAGE_ACCESS_GENERAL);
|
|
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL19);
|
|
if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) {
|
|
/* set bit 15:14 to '01' for QSGMII mode */
|
|
val = (val & 0x3fff) | (1 << 14);
|
|
phy_write(phydev, MDIO_DEVAD_NONE,
|
|
MIIM_VSC8514_GENERAL19, val);
|
|
/* Enable 4 ports MAC QSGMII */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18,
|
|
MIIM_VSC8514_18G_QSGMII);
|
|
} else {
|
|
/*TODO Add SGMII functionality once spec sheet
|
|
* for VSC8514 defines complete functionality
|
|
*/
|
|
}
|
|
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
|
|
/* When bit 15 is cleared the command has completed */
|
|
while ((val & MIIM_VSC8514_18G_CMDSTAT) && timeout--)
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL18);
|
|
|
|
if (0 == timeout) {
|
|
printf("PHY 8514 config failed\n");
|
|
return -1;
|
|
}
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
|
|
|
|
/* configure register to access 23 */
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23);
|
|
/* set bits 10:8 to '000' */
|
|
val = (val & 0xf8ff);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
|
|
|
|
/* Enable Serdes Auto-negotiation */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
|
|
PHY_EXT_PAGE_ACCESS_EXTENDED3);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_MAC_SERDES_CON);
|
|
val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_MAC_SERDES_CON, val);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vsc8664_config(struct phy_device *phydev)
|
|
{
|
|
u32 val;
|
|
|
|
/* Enable MAC interface auto-negotiation */
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON);
|
|
val |= (1 << 13);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON, val);
|
|
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
|
|
PHY_EXT_PAGE_ACCESS_EXTENDED);
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET);
|
|
val |= (1 << 11);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET, val);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
|
|
|
|
/* Enable LED blink */
|
|
val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON);
|
|
val &= ~(1 << 2);
|
|
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON, val);
|
|
|
|
genphy_config_aneg(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver VSC8211_driver = {
|
|
.name = "Vitesse VSC8211",
|
|
.uid = 0xfc4b0,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vitesse_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8221_driver = {
|
|
.name = "Vitesse VSC8221",
|
|
.uid = 0xfc550,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8244_driver = {
|
|
.name = "Vitesse VSC8244",
|
|
.uid = 0xfc6c0,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8234_driver = {
|
|
.name = "Vitesse VSC8234",
|
|
.uid = 0xfc620,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8574_driver = {
|
|
.name = "Vitesse VSC8574",
|
|
.uid = 0x704a0,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vsc8574_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8514_driver = {
|
|
.name = "Vitesse VSC8514",
|
|
.uid = 0x70670,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vsc8514_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8584_driver = {
|
|
.name = "Vitesse VSC8584",
|
|
.uid = 0x707c0,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vsc8574_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8601_driver = {
|
|
.name = "Vitesse VSC8601",
|
|
.uid = 0x70420,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vsc8601_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8641_driver = {
|
|
.name = "Vitesse VSC8641",
|
|
.uid = 0x70430,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8662_driver = {
|
|
.name = "Vitesse VSC8662",
|
|
.uid = 0x70660,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &genphy_config_aneg,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver VSC8664_driver = {
|
|
.name = "Vitesse VSC8664",
|
|
.uid = 0x70660,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vsc8664_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
/* Vitesse bought Cicada, so we'll put these here */
|
|
static struct phy_driver cis8201_driver = {
|
|
.name = "CIS8201",
|
|
.uid = 0xfc410,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &vitesse_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
static struct phy_driver cis8204_driver = {
|
|
.name = "Cicada Cis8204",
|
|
.uid = 0xfc440,
|
|
.mask = 0xffff0,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config = &cis8204_config,
|
|
.startup = &vitesse_startup,
|
|
.shutdown = &genphy_shutdown,
|
|
};
|
|
|
|
int phy_vitesse_init(void)
|
|
{
|
|
phy_register(&VSC8641_driver);
|
|
phy_register(&VSC8601_driver);
|
|
phy_register(&VSC8234_driver);
|
|
phy_register(&VSC8244_driver);
|
|
phy_register(&VSC8211_driver);
|
|
phy_register(&VSC8221_driver);
|
|
phy_register(&VSC8574_driver);
|
|
phy_register(&VSC8584_driver);
|
|
phy_register(&VSC8514_driver);
|
|
phy_register(&VSC8662_driver);
|
|
phy_register(&VSC8664_driver);
|
|
phy_register(&cis8201_driver);
|
|
phy_register(&cis8204_driver);
|
|
|
|
return 0;
|
|
}
|