mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-06 19:26:16 +09:00
b24f6d401c
XFI does not work stable on current board, it's due to heat sink issue, to make it work stable the board needs additional heat sink, enable two XFI lanes only. Right now we do not have such an erratum for the issue, so use a define CONFIG_SYS_FSL_B4860QDS_XFI_ERR to identify it. The workaround will only be used in XFI protocols and only if the hwconfig indicates that XFI is prefered. A new VSC3308 config function is used instead of re-use the original function, to avoid making the function complex and ugly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
334 lines
9.9 KiB
C
334 lines
9.9 KiB
C
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <linux/compiler.h>
|
|
#include <asm/fsl_errata.h>
|
|
#include <asm/processor.h>
|
|
#include <fsl_usb.h>
|
|
#include "fsl_corenet_serdes.h"
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
|
|
/*
|
|
* This work-around is implemented in PBI, so just check to see if the
|
|
* work-around was actually applied. To do this, we check for specific data
|
|
* at specific addresses in DCSR.
|
|
*
|
|
* Array offsets[] contains a list of offsets within DCSR. According to the
|
|
* erratum document, the value at each offset should be 2.
|
|
*/
|
|
static void check_erratum_a4849(uint32_t svr)
|
|
{
|
|
void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
|
|
unsigned int i;
|
|
|
|
#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
|
|
static const uint8_t offsets[] = {
|
|
0x50, 0x54, 0x58, 0x90, 0x94, 0x98
|
|
};
|
|
#endif
|
|
#ifdef CONFIG_PPC_P4080
|
|
static const uint8_t offsets[] = {
|
|
0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
|
|
};
|
|
#endif
|
|
uint32_t x108; /* The value that should be at offset 0x108 */
|
|
|
|
for (i = 0; i < ARRAY_SIZE(offsets); i++) {
|
|
if (in_be32(dcsr + offsets[i]) != 2) {
|
|
printf("Work-around for Erratum A004849 is not enabled\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
|
|
x108 = 0x12;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_P4080
|
|
/*
|
|
* For P4080, the erratum document says that the value at offset 0x108
|
|
* should be 0x12 on rev2, or 0x1c on rev3.
|
|
*/
|
|
if (SVR_MAJ(svr) == 2)
|
|
x108 = 0x12;
|
|
if (SVR_MAJ(svr) == 3)
|
|
x108 = 0x1c;
|
|
#endif
|
|
|
|
if (in_be32(dcsr + 0x108) != x108) {
|
|
printf("Work-around for Erratum A004849 is not enabled\n");
|
|
return;
|
|
}
|
|
|
|
/* Everything matches, so the erratum work-around was applied */
|
|
|
|
printf("Work-around for Erratum A004849 enabled\n");
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
|
|
/*
|
|
* This work-around is implemented in PBI, so just check to see if the
|
|
* work-around was actually applied. To do this, we check for specific data
|
|
* at specific addresses in the SerDes register block.
|
|
*
|
|
* The work-around says that for each SerDes lane, write BnTTLCRy0 =
|
|
* 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
|
|
|
|
*/
|
|
static void check_erratum_a4580(uint32_t svr)
|
|
{
|
|
const serdes_corenet_t __iomem *srds_regs =
|
|
(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
|
|
unsigned int lane;
|
|
|
|
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
|
|
if (serdes_lane_enabled(lane)) {
|
|
const struct serdes_lane __iomem *srds_lane =
|
|
&srds_regs->lane[serdes_get_lane_idx(lane)];
|
|
|
|
/*
|
|
* Verify that the values we were supposed to write in
|
|
* the PBI are actually there. Also, the lower 15
|
|
* bits of res4[3] should be the same as the upper 15
|
|
* bits of res4[1].
|
|
*/
|
|
if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
|
|
(in_be32(&srds_lane->res4[1]) != 0x880000) ||
|
|
(in_be32(&srds_lane->res4[3]) != 0x40000044)) {
|
|
printf("Work-around for Erratum A004580 is "
|
|
"not enabled\n");
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Everything matches, so the erratum work-around was applied */
|
|
|
|
printf("Work-around for Erratum A004580 enabled\n");
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
|
|
/*
|
|
* This workaround can be implemented in PBI, or by u-boot.
|
|
*/
|
|
static void check_erratum_a007212(void)
|
|
{
|
|
u32 __iomem *plldgdcr = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20);
|
|
|
|
if (in_be32(plldgdcr) & 0x1fe) {
|
|
/* check if PLL ratio is set by workaround */
|
|
puts("Work-around for Erratum A007212 enabled\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
|
|
extern int enable_cpu_a011_workaround;
|
|
#endif
|
|
__maybe_unused u32 svr = get_svr();
|
|
|
|
#if defined(CONFIG_FSL_SATA_V2) && defined(CONFIG_FSL_SATA_ERRATUM_A001)
|
|
if (IS_SVR_REV(svr, 1, 0)) {
|
|
switch (SVR_SOC_VER(svr)) {
|
|
case SVR_P1013:
|
|
case SVR_P1022:
|
|
puts("Work-around for Erratum SATA A001 enabled\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8)
|
|
puts("Work-around for Erratum SERDES8 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9)
|
|
puts("Work-around for Erratum SERDES9 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES_A005)
|
|
puts("Work-around for Erratum SERDES-A005 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
|
|
if (SVR_MAJ(svr) < 3)
|
|
puts("Work-around for Erratum CPU22 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
|
|
/*
|
|
* NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
|
|
* also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1
|
|
* The SVR has been checked by cpu_init_r().
|
|
*/
|
|
if (enable_cpu_a011_workaround)
|
|
puts("Work-around for Erratum CPU-A011 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_CPU_A003999)
|
|
puts("Work-around for Erratum CPU-A003999 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_A003474)
|
|
puts("Work-around for Erratum DDR-A003474 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
|
|
puts("Work-around for DDR MSYNC_IN Erratum enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
|
|
puts("Work-around for Erratum ESDHC111 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
|
|
puts("Work-around for Erratum A004468 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
|
|
puts("Work-around for Erratum ESDHC135 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13)
|
|
if (SVR_MAJ(svr) < 3)
|
|
puts("Work-around for Erratum ESDHC13 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001)
|
|
puts("Work-around for Erratum ESDHC-A001 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002
|
|
puts("Work-around for Erratum CPC-A002 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
|
|
puts("Work-around for Erratum CPC-A003 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001
|
|
puts("Work-around for Erratum ELBC-A001 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
|
|
puts("Work-around for Erratum DDR-A003 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
|
|
puts("Work-around for Erratum DDR115 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
|
|
puts("Work-around for Erratum DDR111 enabled\n");
|
|
puts("Work-around for Erratum DDR134 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A002769
|
|
puts("Work-around for Erratum IFC-A002769 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
|
|
puts("Work-around for Erratum P1010-A003549 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_IFC_A003399
|
|
puts("Work-around for Erratum IFC A-003399 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
|
|
if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
|
|
puts("Work-around for Erratum NMG DDR120 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
|
|
puts("Work-around for Erratum NMG_LBC103 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
|
|
if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
|
|
puts("Work-around for Erratum NMG ETSEC129 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A004508
|
|
puts("Work-around for Erratum A004508 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
|
|
puts("Work-around for Erratum A004510 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
|
|
puts("Work-around for Erratum SRIO-A004034 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
|
|
puts("Work-around for Erratum A004934 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
|
|
if (IS_SVR_REV(svr, 1, 0))
|
|
puts("Work-around for Erratum A005871 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006475
|
|
if (SVR_MAJ(get_svr()) == 1)
|
|
puts("Work-around for Erratum A006475 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006384
|
|
if (SVR_MAJ(get_svr()) == 1)
|
|
puts("Work-around for Erratum A006384 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
|
|
/* This work-around is implemented in PBI, so just check for it */
|
|
check_erratum_a4849(svr);
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
|
|
/* This work-around is implemented in PBI, so just check for it */
|
|
check_erratum_a4580(svr);
|
|
#endif
|
|
#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
|
|
puts("Work-around for Erratum PCIe-A003 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_USB14
|
|
puts("Work-around for Erratum USB14 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A007186
|
|
if (has_erratum_a007186())
|
|
puts("Work-around for Erratum A007186 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
|
|
puts("Work-around for Erratum A006593 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006379
|
|
if (has_erratum_a006379())
|
|
puts("Work-around for Erratum A006379 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
|
|
if (IS_SVR_REV(svr, 1, 0))
|
|
puts("Work-around for Erratum A003571 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
|
|
puts("Work-around for Erratum A-005812 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A005125
|
|
puts("Work-around for Erratum A005125 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A007075
|
|
if (has_erratum_a007075())
|
|
puts("Work-around for Erratum A007075 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A007798
|
|
if (has_erratum_a007798())
|
|
puts("Work-around for Erratum A007798 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447
|
|
if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) ||
|
|
(SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV))
|
|
puts("Work-around for Erratum I2C-A004447 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
|
|
if (has_erratum_a006261())
|
|
puts("Work-around for Erratum A006261 enabled\n");
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A007212
|
|
check_erratum_a007212();
|
|
#endif
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A005434
|
|
puts("Work-around for Erratum A-005434 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_ERRATUM_A008044) && \
|
|
defined(CONFIG_A008044_WORKAROUND)
|
|
if (IS_SVR_REV(svr, 1, 0))
|
|
puts("Work-around for Erratum A-008044 enabled\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_FSL_B4860QDS_XFI_ERR) && defined(CONFIG_B4860QDS)
|
|
puts("Work-around for Erratum XFI on B4860QDS enabled\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
errata, 1, 0, do_errata,
|
|
"Report errata workarounds",
|
|
""
|
|
);
|