u-boot-brain/drivers/ram/stm32mp1/stm32mp1_ram.c
Marek Vasut 0c27c16495 ram: stm32mp1: Add support for multiple configs
Add support for multiple DRAM configuration subnodes, while retaining
the support for a single flat DRAM configuration node. This is useful
on systems which can be manufactured in multiple configurations and
where the DRAM configuration can be determined at runtime.

The code is augmented by a function which can be overridden on board
level, allowing a match on the configuration node name, very much like
the fitImage configuration node name matching works. The default match
is on the single top-level DRAM configuration, if matching on subnodes
is required, then this board_stm32mp1_ddr_config_name_match() must be
overridden.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
2020-05-14 09:02:12 +02:00

239 lines
5.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <init.h>
#include <ram.h>
#include <regmap.h>
#include <syscon.h>
#include <asm/io.h>
#include "stm32mp1_ddr.h"
static const char *const clkname[] = {
"ddrc1",
"ddrc2",
"ddrcapb",
"ddrphycapb",
"ddrphyc" /* LAST clock => used for get_rate() */
};
int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed)
{
unsigned long ddrphy_clk;
unsigned long ddr_clk;
struct clk clk;
int ret;
unsigned int idx;
for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) {
ret = clk_get_by_name(priv->dev, clkname[idx], &clk);
if (!ret)
ret = clk_enable(&clk);
if (ret) {
printf("error for %s : %d\n", clkname[idx], ret);
return ret;
}
}
priv->clk = clk;
ddrphy_clk = clk_get_rate(&priv->clk);
debug("DDR: mem_speed (%d kHz), RCC %d kHz\n",
mem_speed, (u32)(ddrphy_clk / 1000));
/* max 10% frequency delta */
ddr_clk = abs(ddrphy_clk - mem_speed * 1000);
if (ddr_clk > (mem_speed * 100)) {
pr_err("DDR expected freq %d kHz, current is %d kHz\n",
mem_speed, (u32)(ddrphy_clk / 1000));
return -EINVAL;
}
return 0;
}
__weak int board_stm32mp1_ddr_config_name_match(struct udevice *dev,
const char *name)
{
return 0; /* Always match */
}
static ofnode stm32mp1_ddr_get_ofnode(struct udevice *dev)
{
const char *name;
ofnode node;
dev_for_each_subnode(node, dev) {
name = ofnode_get_property(node, "compatible", NULL);
if (!board_stm32mp1_ddr_config_name_match(dev, name))
return node;
}
return dev_ofnode(dev);
}
static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
{
struct ddr_info *priv = dev_get_priv(dev);
int ret;
unsigned int idx;
struct clk axidcg;
struct stm32mp1_ddr_config config;
ofnode node = stm32mp1_ddr_get_ofnode(dev);
#define PARAM(x, y, z) \
{ .name = x, \
.offset = offsetof(struct stm32mp1_ddr_config, y), \
.size = sizeof(config.y) / sizeof(u32), \
.present = z, \
}
#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x, NULL)
#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x, NULL)
#define PHY_PARAM_OPT(x) PARAM("st,phy-"#x, p_##x, &config.p_##x##_present)
const struct {
const char *name; /* name in DT */
const u32 offset; /* offset in config struct */
const u32 size; /* size of parameters */
bool * const present; /* presence indication for opt */
} param[] = {
CTL_PARAM(reg),
CTL_PARAM(timing),
CTL_PARAM(map),
CTL_PARAM(perf),
PHY_PARAM(reg),
PHY_PARAM(timing),
PHY_PARAM_OPT(cal)
};
config.info.speed = ofnode_read_u32_default(node, "st,mem-speed", 0);
config.info.size = ofnode_read_u32_default(node, "st,mem-size", 0);
config.info.name = ofnode_read_string(node, "st,mem-name");
if (!config.info.name) {
debug("%s: no st,mem-name\n", __func__);
return -EINVAL;
}
printf("RAM: %s\n", config.info.name);
for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
ret = ofnode_read_u32_array(node, param[idx].name,
(void *)((u32)&config +
param[idx].offset),
param[idx].size);
debug("%s: %s[0x%x] = %d\n", __func__,
param[idx].name, param[idx].size, ret);
if (ret &&
(ret != -FDT_ERR_NOTFOUND || !param[idx].present)) {
pr_err("%s: Cannot read %s, error=%d\n",
__func__, param[idx].name, ret);
return -EINVAL;
}
if (param[idx].present) {
/* save presence of optional parameters */
*param[idx].present = true;
if (ret == -FDT_ERR_NOTFOUND) {
*param[idx].present = false;
#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE
/* reset values if used later */
memset((void *)((u32)&config +
param[idx].offset),
0, param[idx].size * sizeof(u32));
#endif
}
}
}
ret = clk_get_by_name(dev, "axidcg", &axidcg);
if (ret) {
debug("%s: Cannot found axidcg\n", __func__);
return -EINVAL;
}
clk_disable(&axidcg); /* disable clock gating during init */
stm32mp1_ddr_init(priv, &config);
clk_enable(&axidcg); /* enable clock gating */
/* check size */
debug("%s : get_ram_size(%x, %x)\n", __func__,
(u32)priv->info.base, (u32)STM32_DDR_SIZE);
priv->info.size = get_ram_size((long *)priv->info.base,
STM32_DDR_SIZE);
debug("%s : %x\n", __func__, (u32)priv->info.size);
/* check memory access for all memory */
if (config.info.size != priv->info.size) {
printf("DDR invalid size : 0x%x, expected 0x%x\n",
priv->info.size, config.info.size);
return -EINVAL;
}
return 0;
}
static int stm32mp1_ddr_probe(struct udevice *dev)
{
struct ddr_info *priv = dev_get_priv(dev);
struct regmap *map;
int ret;
debug("STM32MP1 DDR probe\n");
priv->dev = dev;
ret = regmap_init_mem(dev_ofnode(dev), &map);
if (ret)
return ret;
priv->ctl = regmap_get_range(map, 0);
priv->phy = regmap_get_range(map, 1);
priv->rcc = STM32_RCC_BASE;
priv->info.base = STM32_DDR_BASE;
#if !defined(CONFIG_TFABOOT) && \
(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
priv->info.size = 0;
return stm32mp1_ddr_setup(dev);
#else
ofnode node = stm32mp1_ddr_get_ofnode(dev);
priv->info.size = ofnode_read_u32_default(node, "st,mem-size", 0);
return 0;
#endif
}
static int stm32mp1_ddr_get_info(struct udevice *dev, struct ram_info *info)
{
struct ddr_info *priv = dev_get_priv(dev);
*info = priv->info;
return 0;
}
static struct ram_ops stm32mp1_ddr_ops = {
.get_info = stm32mp1_ddr_get_info,
};
static const struct udevice_id stm32mp1_ddr_ids[] = {
{ .compatible = "st,stm32mp1-ddr" },
{ }
};
U_BOOT_DRIVER(ddr_stm32mp1) = {
.name = "stm32mp1_ddr",
.id = UCLASS_RAM,
.of_match = stm32mp1_ddr_ids,
.ops = &stm32mp1_ddr_ops,
.probe = stm32mp1_ddr_probe,
.priv_auto_alloc_size = sizeof(struct ddr_info),
};