u-boot-brain/drivers/mtd/nand/kirkwood_nand.c
Scott Wood 17cb4b8f32 mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data
These functions are part of the Linux 4.6 sync.  They are being added
before the main sync patch in order to make it easier to address the
issue across all NAND drivers (many/most of which do not closely track
their Linux counterparts) separately from other merge issues.

Signed-off-by: Scott Wood <oss@buserror.net>
2016-06-03 20:27:48 -05:00

93 lines
1.9 KiB
C

/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
#include <nand.h>
/* NAND Flash Soc registers */
struct kwnandf_registers {
u32 rd_params; /* 0x10418 */
u32 wr_param; /* 0x1041c */
u8 pad[0x10470 - 0x1041c - 4];
u32 ctrl; /* 0x10470 */
};
static struct kwnandf_registers *nf_reg =
(struct kwnandf_registers *)KW_NANDF_BASE;
static u32 nand_mpp_backup[9] = { 0 };
/*
* hardware specific access to control-lines/bits
*/
#define NAND_ACTCEBOOT_BIT 0x02
static void kw_nand_hwcontrol(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *nc = mtd_to_nand(mtd);
u32 offs;
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
offs = (1 << 0); /* Commands with A[1:0] == 01 */
else if (ctrl & NAND_ALE)
offs = (1 << 1); /* Addresses with A[1:0] == 10 */
else
return;
writeb(cmd, nc->IO_ADDR_W + offs);
}
void kw_nand_select_chip(struct mtd_info *mtd, int chip)
{
u32 data;
static const u32 nand_config[] = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP18_NF_IO0,
MPP19_NF_IO1,
0
};
if (chip >= 0)
kirkwood_mpp_conf(nand_config, nand_mpp_backup);
else
kirkwood_mpp_conf(nand_mpp_backup, NULL);
data = readl(&nf_reg->ctrl);
data |= NAND_ACTCEBOOT_BIT;
writel(data, &nf_reg->ctrl);
}
int board_nand_init(struct nand_chip *nand)
{
nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
#if defined(CONFIG_SYS_NAND_NO_SUBPAGE_WRITE)
nand->options |= NAND_NO_SUBPAGE_WRITE;
#endif
#if defined(CONFIG_NAND_ECC_BCH)
nand->ecc.mode = NAND_ECC_SOFT_BCH;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif
nand->cmd_ctrl = kw_nand_hwcontrol;
nand->chip_delay = 40;
nand->select_chip = kw_nand_select_chip;
return 0;
}