mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![wdenk](/assets/img/avatar_default.png)
- Added Motorola CPU 8540/8560 support (cpu/85xx) - Added Motorola MPC8540ADS board support (board/mpc8540ads) - Added Motorola MPC8560ADS board support (board/mpc8560ads) * Minor code cleanup
2373 lines
68 KiB
C
2373 lines
68 KiB
C
/******************************************************************************
|
|
*
|
|
* Name: skgeinit.c
|
|
* Project: GEnesis, PCI Gigabit Ethernet Adapter
|
|
* Version: $Revision: 1.85 $
|
|
* Date: $Date: 2003/02/05 15:30:33 $
|
|
* Purpose: Contains functions to initialize the GE HW
|
|
*
|
|
******************************************************************************/
|
|
|
|
/******************************************************************************
|
|
*
|
|
* (C)Copyright 1998-2003 SysKonnect GmbH.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* The information in this file is provided "AS IS" without warranty.
|
|
*
|
|
******************************************************************************/
|
|
|
|
/******************************************************************************
|
|
*
|
|
* History:
|
|
*
|
|
* $Log: skgeinit.c,v $
|
|
* Revision 1.85 2003/02/05 15:30:33 rschmidt
|
|
* Corrected setting of GIHstClkFact (Host Clock Factor) and
|
|
* GIPollTimerVal (Descr. Poll Timer Init Value) for YUKON.
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.84 2003/01/28 09:57:25 rschmidt
|
|
* Added detection of YUKON-Lite Rev. A0 (stored in GIYukonLite).
|
|
* Disabled Rx GMAC FIFO Flush for YUKON-Lite Rev. A0.
|
|
* Added support for CLK_RUN (YUKON-Lite).
|
|
* Added additional check of PME from D3cold for setting GIVauxAvail.
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.83 2002/12/17 16:15:41 rschmidt
|
|
* Added default setting of PhyType (Copper) for YUKON.
|
|
* Added define around check for HW self test results.
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.82 2002/12/05 13:40:21 rschmidt
|
|
* Added setting of Rx GMAC FIFO Flush Mask register.
|
|
* Corrected PhyType with new define SK_PHY_MARV_FIBER when
|
|
* YUKON Fiber board was found.
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.81 2002/11/15 12:48:35 rschmidt
|
|
* Replaced message SKERR_HWI_E018 with SKERR_HWI_E024 for Rx queue error
|
|
* in SkGeStopPort().
|
|
* Added init for pAC->GIni.GIGenesis with SK_FALSE in YUKON-branch.
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.80 2002/11/12 17:28:30 rschmidt
|
|
* Initialized GIPciSlot64 and GIPciClock66 in SkGeInit1().
|
|
* Reduced PCI FIFO watermarks for 32bit/33MHz bus in SkGeInitBmu().
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.79 2002/10/21 09:31:02 mkarl
|
|
* Changed SkGeInitAssignRamToQueues(), removed call to
|
|
* SkGeInitAssignRamToQueues in SkGeInit1 and fixed compiler warning in
|
|
* SkGeInit1.
|
|
*
|
|
* Revision 1.78 2002/10/16 15:55:07 mkarl
|
|
* Fixed a bug in SkGeInitAssignRamToQueues.
|
|
*
|
|
* Revision 1.77 2002/10/14 15:07:22 rschmidt
|
|
* Corrected timeout handling for Rx queue in SkGeStopPort() (#10748)
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.76 2002/10/11 09:24:38 mkarl
|
|
* Added check for HW self test results.
|
|
*
|
|
* Revision 1.75 2002/10/09 16:56:44 mkarl
|
|
* Now call SkGeInitAssignRamToQueues() in Init Level 1 in order to assign
|
|
* the adapter memory to the queues. This default assignment is not suitable
|
|
* for dual net mode.
|
|
*
|
|
* Revision 1.74 2002/09/12 08:45:06 rwahl
|
|
* Set defaults for PMSCap, PLinkSpeed & PLinkSpeedCap dependent on PHY.
|
|
*
|
|
* Revision 1.73 2002/08/16 15:19:45 rschmidt
|
|
* Corrected check for Tx queues in SkGeCheckQSize().
|
|
* Added init for new entry GIGenesis and GICopperType
|
|
* Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis.
|
|
* Replaced wrong 1st para pAC with IoC in SK_IN/OUT macros.
|
|
*
|
|
* Revision 1.72 2002/08/12 13:38:55 rschmidt
|
|
* Added check if VAUX is available (stored in GIVauxAvail)
|
|
* Initialized PLinkSpeedCap in Port struct with SK_LSPEED_CAP_1000MBPS
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.71 2002/08/08 16:32:58 rschmidt
|
|
* Added check for Tx queues in SkGeCheckQSize().
|
|
* Added start of Time Stamp Timer (YUKON) in SkGeInit2().
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.70 2002/07/23 16:04:26 rschmidt
|
|
* Added init for GIWolOffs (HW-Bug in YUKON 1st rev.)
|
|
* Minor changes
|
|
*
|
|
* Revision 1.69 2002/07/17 17:07:08 rwahl
|
|
* - SkGeInit1(): fixed PHY type debug output; corrected init of GIFunc
|
|
* table & GIMacType.
|
|
* - Editorial changes.
|
|
*
|
|
* Revision 1.68 2002/07/15 18:38:31 rwahl
|
|
* Added initialization for MAC type dependent function table.
|
|
*
|
|
* Revision 1.67 2002/07/15 15:45:39 rschmidt
|
|
* Added Tx Store & Forward for YUKON (GMAC Tx FIFO is only 1 kB)
|
|
* Replaced SK_PHY_MARV by SK_PHY_MARV_COPPER
|
|
* Editorial changes
|
|
*
|
|
* Revision 1.66 2002/06/10 09:35:08 rschmidt
|
|
* Replaced C++ comments (//)
|
|
* Editorial changes
|
|
*
|
|
* Revision 1.65 2002/06/05 08:33:37 rschmidt
|
|
* Changed GIRamSize and Reset sequence for YUKON.
|
|
* SkMacInit() replaced by SkXmInitMac() resp. SkGmInitMac()
|
|
*
|
|
* Revision 1.64 2002/04/25 13:03:20 rschmidt
|
|
* Changes for handling YUKON.
|
|
* Removed reference to xmac_ii.h (not necessary).
|
|
* Moved all defines into header file.
|
|
* Replaced all SkXm...() functions with SkMac...() to handle also
|
|
* YUKON's GMAC.
|
|
* Added handling for GMAC FIFO in SkGeInitMacFifo(), SkGeStopPort().
|
|
* Removed 'goto'-directive from SkGeCfgSync(), SkGeCheckQSize().
|
|
* Replaced all XMAC-access macros by functions: SkMacRxTxDisable(),
|
|
* SkMacFlushTxFifo().
|
|
* Optimized timeout handling in SkGeStopPort().
|
|
* Initialized PLinkSpeed in Port struct with SK_LSPEED_AUTO.
|
|
* Release of GMAC Link Control reset in SkGeInit1().
|
|
* Initialized GIChipId and GIChipRev in GE Init structure.
|
|
* Added GIRamSize and PhyType values for YUKON.
|
|
* Removed use of PRxCmd to setup XMAC.
|
|
* Moved setting of XM_RX_DIS_CEXT to SkXmInitMac().
|
|
* Use of SkGeXmitLED() only for GENESIS.
|
|
* Changes for V-CPU support.
|
|
* Editorial changes.
|
|
*
|
|
* Revision 1.63 2001/04/05 11:02:09 rassmann
|
|
* Stop Port check of the STOP bit did not take 2/18 sec as wanted.
|
|
*
|
|
* Revision 1.62 2001/02/07 07:54:21 rassmann
|
|
* Corrected copyright.
|
|
*
|
|
* Revision 1.61 2001/01/31 15:31:40 gklug
|
|
* fix: problem with autosensing an SR8800 switch
|
|
*
|
|
* Revision 1.60 2000/10/18 12:22:21 cgoos
|
|
* Added workaround for half duplex hangup.
|
|
*
|
|
* Revision 1.59 2000/10/10 11:22:06 gklug
|
|
* add: in manual half duplex mode ignore carrier extension errors
|
|
*
|
|
* Revision 1.58 2000/10/02 14:10:27 rassmann
|
|
* Reading BCOM PHY after releasing reset until it returns a valid value.
|
|
*
|
|
* Revision 1.57 2000/08/03 14:55:28 rassmann
|
|
* Waiting for I2C to be ready before de-initializing adapter
|
|
* (prevents sensors from hanging up).
|
|
*
|
|
* Revision 1.56 2000/07/27 12:16:48 gklug
|
|
* fix: Stop Port check of the STOP bit does now take 2/18 sec as wanted
|
|
*
|
|
* Revision 1.55 1999/11/22 13:32:26 cgoos
|
|
* Changed license header to GPL.
|
|
*
|
|
* Revision 1.54 1999/10/26 07:32:54 malthoff
|
|
* Initialize PHWLinkUp with SK_FALSE. Required for Diagnostics.
|
|
*
|
|
* Revision 1.53 1999/08/12 19:13:50 malthoff
|
|
* Fix for 1000BT. Do not owerwrite XM_MMU_CMD when
|
|
* disabling receiver and transmitter. Other bits
|
|
* may be lost.
|
|
*
|
|
* Revision 1.52 1999/07/01 09:29:54 gklug
|
|
* fix: DoInitRamQueue needs pAC
|
|
*
|
|
* Revision 1.51 1999/07/01 08:42:21 gklug
|
|
* chg: use Store & forward for RAM buffer when Jumbos are used
|
|
*
|
|
* Revision 1.50 1999/05/27 13:19:38 cgoos
|
|
* Added Tx PCI watermark initialization.
|
|
* Removed Tx RAM queue Store & Forward setting.
|
|
*
|
|
* Revision 1.49 1999/05/20 14:32:45 malthoff
|
|
* SkGeLinkLED() is completly removed now.
|
|
*
|
|
* Revision 1.48 1999/05/19 07:28:24 cgoos
|
|
* SkGeLinkLED no more available for drivers.
|
|
* Changes for 1000Base-T.
|
|
*
|
|
* Revision 1.47 1999/04/08 13:57:45 gklug
|
|
* add: Init of new port struct fiels PLinkResCt
|
|
* chg: StopPort Timer check
|
|
*
|
|
* Revision 1.46 1999/03/25 07:42:15 malthoff
|
|
* SkGeStopPort(): Add workaround for cache incoherency.
|
|
* Create error log entry, disable port, and
|
|
* exit loop if it does not terminate.
|
|
* Add XM_RX_LENERR_OK to the default value for the
|
|
* XMAC receive command register.
|
|
*
|
|
* Revision 1.45 1999/03/12 16:24:47 malthoff
|
|
* Remove PPollRxD and PPollTxD.
|
|
* Add check for GIPollTimerVal.
|
|
*
|
|
* Revision 1.44 1999/03/12 13:40:23 malthoff
|
|
* Fix: SkGeXmitLED(), SK_LED_TST mode does not work.
|
|
* Add: Jumbo frame support.
|
|
* Chg: Resolution of parameter IntTime in SkGeCfgSync().
|
|
*
|
|
* Revision 1.43 1999/02/09 10:29:46 malthoff
|
|
* Bugfix: The previous modification again also for the second location.
|
|
*
|
|
* Revision 1.42 1999/02/09 09:35:16 malthoff
|
|
* Bugfix: The bits '66 MHz Capable' and 'NEWCAP are reset while
|
|
* clearing the error bits in the PCI status register.
|
|
*
|
|
* Revision 1.41 1999/01/18 13:07:02 malthoff
|
|
* Bugfix: Do not use CFG cycles after during Init- or Runtime, because
|
|
* they may not be available after Boottime.
|
|
*
|
|
* Revision 1.40 1999/01/11 12:40:49 malthoff
|
|
* Bug fix: PCI_STATUS: clearing error bits sets the UDF bit.
|
|
*
|
|
* Revision 1.39 1998/12/11 15:17:33 gklug
|
|
* chg: Init LipaAutoNeg with Unknown
|
|
*
|
|
* Revision 1.38 1998/12/10 11:02:57 malthoff
|
|
* Disable Error Log Message when calling SkGeInit(level 2)
|
|
* more than once.
|
|
*
|
|
* Revision 1.37 1998/12/07 12:18:25 gklug
|
|
* add: refinement of autosense mode: take into account the autoneg cap of LiPa
|
|
*
|
|
* Revision 1.36 1998/12/07 07:10:39 gklug
|
|
* fix: init values of LinkBroken/ Capabilities for management
|
|
*
|
|
* Revision 1.35 1998/12/02 10:56:20 gklug
|
|
* fix: do NOT init LoinkSync Counter.
|
|
*
|
|
* Revision 1.34 1998/12/01 10:53:21 gklug
|
|
* add: init of additional Counters for workaround
|
|
*
|
|
* Revision 1.33 1998/12/01 10:00:49 gklug
|
|
* add: init PIsave var in Port struct
|
|
*
|
|
* Revision 1.32 1998/11/26 14:50:40 gklug
|
|
* chg: Default is autosensing with AUTOFULL mode
|
|
*
|
|
* Revision 1.31 1998/11/25 15:36:16 gklug
|
|
* fix: do NOT stop LED Timer when port should be stopped
|
|
*
|
|
* Revision 1.30 1998/11/24 13:15:28 gklug
|
|
* add: Init PCkeckPar struct member
|
|
*
|
|
* Revision 1.29 1998/11/18 13:19:27 malthoff
|
|
* Disable packet arbiter timeouts on receive side.
|
|
* Use maximum timeout value for packet arbiter
|
|
* transmit timeouts.
|
|
* Add TestStopBit() function to handle stop RX/TX
|
|
* problem with active descriptor poll timers.
|
|
* Bug Fix: Descriptor Poll Timer not started, because
|
|
* GIPollTimerVal was initialized with 0.
|
|
*
|
|
* Revision 1.28 1998/11/13 14:24:26 malthoff
|
|
* Bug Fix: SkGeStopPort() may hang if a Packet Arbiter Timout
|
|
* is pending or occurs while waiting for TX_STOP and RX_STOP.
|
|
* The PA timeout is cleared now while waiting for TX- or RX_STOP.
|
|
*
|
|
* Revision 1.27 1998/11/02 11:04:36 malthoff
|
|
* fix the last fix
|
|
*
|
|
* Revision 1.26 1998/11/02 10:37:03 malthoff
|
|
* Fix: SkGePollTxD() enables always the synchronounous poll timer.
|
|
*
|
|
* Revision 1.25 1998/10/28 07:12:43 cgoos
|
|
* Fixed "LED_STOP" in SkGeLnkSyncCnt, "== SK_INIT_IO" in SkGeInit.
|
|
* Removed: Reset of RAM Interface in SkGeStopPort.
|
|
*
|
|
* Revision 1.24 1998/10/27 08:13:12 malthoff
|
|
* Remove temporary code.
|
|
*
|
|
* Revision 1.23 1998/10/26 07:45:03 malthoff
|
|
* Add Address Calculation Workaround: If the EPROM byte
|
|
* Id is 3, the address offset is 512 kB.
|
|
* Initialize default values for PLinkMode and PFlowCtrlMode.
|
|
*
|
|
* Revision 1.22 1998/10/22 09:46:47 gklug
|
|
* fix SysKonnectFileId typo
|
|
*
|
|
* Revision 1.21 1998/10/20 12:11:56 malthoff
|
|
* Don't dendy the Queue config if the size of the unused
|
|
* Rx qeueu is zero.
|
|
*
|
|
* Revision 1.20 1998/10/19 07:27:58 malthoff
|
|
* SkGeInitRamIface() is public to be called by diagnostics.
|
|
*
|
|
* Revision 1.19 1998/10/16 13:33:45 malthoff
|
|
* Fix: enabling descriptor polling is not allowed until
|
|
* the descriptor addresses are set. Descriptor polling
|
|
* must be handled by the driver.
|
|
*
|
|
* Revision 1.18 1998/10/16 10:58:27 malthoff
|
|
* Remove temp. code for Diag prototype.
|
|
* Remove lint warning for dummy reads.
|
|
* Call SkGeLoadLnkSyncCnt() during SkGeInitPort().
|
|
*
|
|
* Revision 1.17 1998/10/14 09:16:06 malthoff
|
|
* Change parameter LimCount and programming of
|
|
* the limit counter in SkGeCfgSync().
|
|
*
|
|
* Revision 1.16 1998/10/13 09:21:16 malthoff
|
|
* Don't set XM_RX_SELF_RX in RxCmd Reg, because it's
|
|
* like a Loopback Mode in half duplex.
|
|
*
|
|
* Revision 1.15 1998/10/09 06:47:40 malthoff
|
|
* SkGeInitMacArb(): set recovery counters init value
|
|
* to zero although this counters are not uesd.
|
|
* Bug fix in Rx Upper/Lower Pause Threshold calculation.
|
|
* Add XM_RX_SELF_RX to RxCmd.
|
|
*
|
|
* Revision 1.14 1998/10/06 15:15:53 malthoff
|
|
* Make sure no pending IRQ is cleared in SkGeLoadLnkSyncCnt().
|
|
*
|
|
* Revision 1.13 1998/10/06 14:09:36 malthoff
|
|
* Add SkGeLoadLnkSyncCnt(). Modify
|
|
* the 'port stopped' condition according
|
|
* to the current problem report.
|
|
*
|
|
* Revision 1.12 1998/10/05 08:17:21 malthoff
|
|
* Add functions: SkGePollRxD(), SkGePollTxD(),
|
|
* DoCalcAddr(), SkGeCheckQSize(),
|
|
* DoInitRamQueue(), and SkGeCfgSync().
|
|
* Add coding for SkGeInitMacArb(), SkGeInitPktArb(),
|
|
* SkGeInitMacFifo(), SkGeInitRamBufs(),
|
|
* SkGeInitRamIface(), and SkGeInitBmu().
|
|
*
|
|
* Revision 1.11 1998/09/29 08:26:29 malthoff
|
|
* bug fix: SkGeInit0() 'i' should be increment.
|
|
*
|
|
* Revision 1.10 1998/09/28 13:19:01 malthoff
|
|
* Coding time: Save the done work.
|
|
* Modify SkGeLinkLED(), add SkGeXmitLED(),
|
|
* define SkGeCheckQSize(), SkGeInitMacArb(),
|
|
* SkGeInitPktArb(), SkGeInitMacFifo(),
|
|
* SkGeInitRamBufs(), SkGeInitRamIface(),
|
|
* and SkGeInitBmu(). Do coding for SkGeStopPort(),
|
|
* SkGeInit1(), SkGeInit2(), and SkGeInit3().
|
|
* Do coding for SkGeDinit() and SkGeInitPort().
|
|
*
|
|
* Revision 1.9 1998/09/16 14:29:05 malthoff
|
|
* Some minor changes.
|
|
*
|
|
* Revision 1.8 1998/09/11 05:29:14 gklug
|
|
* add: init state of a port
|
|
*
|
|
* Revision 1.7 1998/09/04 09:26:25 malthoff
|
|
* Short temporary modification.
|
|
*
|
|
* Revision 1.6 1998/09/04 08:27:59 malthoff
|
|
* Remark the do-while in StopPort() because it never ends
|
|
* without a GE adapter.
|
|
*
|
|
* Revision 1.5 1998/09/03 14:05:45 malthoff
|
|
* Change comment for SkGeInitPort(). Do not
|
|
* repair the queue sizes if invalid.
|
|
*
|
|
* Revision 1.4 1998/09/03 10:03:19 malthoff
|
|
* Implement the new interface according to the
|
|
* reviewed interface specification.
|
|
*
|
|
* Revision 1.3 1998/08/19 09:11:25 gklug
|
|
* fix: struct are removed from c-source (see CCC)
|
|
*
|
|
* Revision 1.2 1998/07/28 12:33:58 malthoff
|
|
* Add 'IoC' parameter in function declaration and SK IO macros.
|
|
*
|
|
* Revision 1.1 1998/07/23 09:48:57 malthoff
|
|
* Creation. First dummy 'C' file.
|
|
* SkGeInit(Level 0) is card_start for GE.
|
|
* SkGeDeInit() is card_stop for GE.
|
|
*
|
|
*
|
|
******************************************************************************/
|
|
|
|
#include <config.h>
|
|
|
|
#ifdef CONFIG_SK98
|
|
|
|
#include "h/skdrv1st.h"
|
|
#include "h/skdrv2nd.h"
|
|
|
|
/* global variables ***********************************************************/
|
|
|
|
/* local variables ************************************************************/
|
|
|
|
static const char SysKonnectFileId[] =
|
|
"@(#)$Id: skgeinit.c,v 1.85 2003/02/05 15:30:33 rschmidt Exp $ (C) SK ";
|
|
|
|
struct s_QOffTab {
|
|
int RxQOff; /* Receive Queue Address Offset */
|
|
int XsQOff; /* Sync Tx Queue Address Offset */
|
|
int XaQOff; /* Async Tx Queue Address Offset */
|
|
};
|
|
static struct s_QOffTab QOffTab[] = {
|
|
{Q_R1, Q_XS1, Q_XA1}, {Q_R2, Q_XS2, Q_XA2}
|
|
};
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGePollRxD() - Enable / Disable Descriptor Polling of RxD Ring
|
|
*
|
|
* Description:
|
|
* Enable or disable the descriptor polling of the receive descriptor
|
|
* ring (RxD) for port 'Port'.
|
|
* The new configuration is *not* saved over any SkGeStopPort() and
|
|
* SkGeInitPort() calls.
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
void SkGePollRxD(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Port, /* Port Index (MAC_1 + n) */
|
|
SK_BOOL PollRxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
|
|
{
|
|
SK_GEPORT *pPrt;
|
|
|
|
pPrt = &pAC->GIni.GP[Port];
|
|
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), (PollRxD) ?
|
|
CSR_ENA_POL : CSR_DIS_POL);
|
|
} /* SkGePollRxD */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGePollTxD() - Enable / Disable Descriptor Polling of TxD Rings
|
|
*
|
|
* Description:
|
|
* Enable or disable the descriptor polling of the transmit descriptor
|
|
* ring(s) (TxD) for port 'Port'.
|
|
* The new configuration is *not* saved over any SkGeStopPort() and
|
|
* SkGeInitPort() calls.
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
void SkGePollTxD(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Port, /* Port Index (MAC_1 + n) */
|
|
SK_BOOL PollTxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */
|
|
{
|
|
SK_GEPORT *pPrt;
|
|
SK_U32 DWord;
|
|
|
|
pPrt = &pAC->GIni.GP[Port];
|
|
|
|
DWord = (PollTxD) ? CSR_ENA_POL : CSR_DIS_POL;
|
|
|
|
if (pPrt->PXSQSize != 0) {
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord);
|
|
}
|
|
|
|
if (pPrt->PXAQSize != 0) {
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord);
|
|
}
|
|
} /* SkGePollTxD */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeYellowLED() - Switch the yellow LED on or off.
|
|
*
|
|
* Description:
|
|
* Switch the yellow LED on or off.
|
|
*
|
|
* Note:
|
|
* This function may be called any time after SkGeInit(Level 1).
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
void SkGeYellowLED(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int State) /* yellow LED state, 0 = OFF, 0 != ON */
|
|
{
|
|
if (State == 0) {
|
|
/* Switch yellow LED OFF */
|
|
SK_OUT8(IoC, B0_LED, LED_STAT_OFF);
|
|
}
|
|
else {
|
|
/* Switch yellow LED ON */
|
|
SK_OUT8(IoC, B0_LED, LED_STAT_ON);
|
|
}
|
|
} /* SkGeYellowLED */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeXmitLED() - Modify the Operational Mode of a transmission LED.
|
|
*
|
|
* Description:
|
|
* The Rx or Tx LED which is specified by 'Led' will be
|
|
* enabled, disabled or switched on in test mode.
|
|
*
|
|
* Note:
|
|
* 'Led' must contain the address offset of the LEDs INI register.
|
|
*
|
|
* Usage:
|
|
* SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
void SkGeXmitLED(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Led, /* offset to the LED Init Value register */
|
|
int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */
|
|
{
|
|
SK_U32 LedIni;
|
|
|
|
switch (Mode) {
|
|
case SK_LED_ENA:
|
|
LedIni = SK_XMIT_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
|
|
SK_OUT32(IoC, Led + XMIT_LED_INI, LedIni);
|
|
SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
|
|
break;
|
|
case SK_LED_TST:
|
|
SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_ON);
|
|
SK_OUT32(IoC, Led + XMIT_LED_CNT, 100);
|
|
SK_OUT8(IoC, Led + XMIT_LED_CTRL, LED_START);
|
|
break;
|
|
case SK_LED_DIS:
|
|
default:
|
|
/*
|
|
* Do NOT stop the LED Timer here. The LED might be
|
|
* in on state. But it needs to go off.
|
|
*/
|
|
SK_OUT32(IoC, Led + XMIT_LED_CNT, 0);
|
|
SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* 1000BT: The Transmit LED is driven by the PHY.
|
|
* But the default LED configuration is used for
|
|
* Level One and Broadcom PHYs.
|
|
* (Broadcom: It may be that PHY_B_PEC_EN_LTR has to be set.)
|
|
* (In this case it has to be added here. But we will see. XXX)
|
|
*/
|
|
} /* SkGeXmitLED */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* DoCalcAddr() - Calculates the start and the end address of a queue.
|
|
*
|
|
* Description:
|
|
* This function calculates the start and the end address of a queue.
|
|
* Afterwards the 'StartVal' is incremented to the next start position.
|
|
* If the port is already initialized the calculated values
|
|
* will be checked against the configured values and an
|
|
* error will be returned, if they are not equal.
|
|
* If the port is not initialized the values will be written to
|
|
* *StartAdr and *EndAddr.
|
|
*
|
|
* Returns:
|
|
* 0: success
|
|
* 1: configuration error
|
|
*/
|
|
static int DoCalcAddr(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_GEPORT *pPrt, /* port index */
|
|
int QuSize, /* size of the queue to configure in kB */
|
|
SK_U32 *StartVal, /* start value for address calculation */
|
|
SK_U32 *QuStartAddr, /* start addr to calculate */
|
|
SK_U32 *QuEndAddr) /* end address to calculate */
|
|
{
|
|
SK_U32 EndVal;
|
|
SK_U32 NextStart;
|
|
int Rtv;
|
|
|
|
Rtv = 0;
|
|
if (QuSize == 0) {
|
|
EndVal = *StartVal;
|
|
NextStart = EndVal;
|
|
}
|
|
else {
|
|
EndVal = *StartVal + ((SK_U32)QuSize * 1024) - 1;
|
|
NextStart = EndVal + 1;
|
|
}
|
|
|
|
if (pPrt->PState >= SK_PRT_INIT) {
|
|
if (*StartVal != *QuStartAddr || EndVal != *QuEndAddr) {
|
|
Rtv = 1;
|
|
}
|
|
}
|
|
else {
|
|
*QuStartAddr = *StartVal;
|
|
*QuEndAddr = EndVal;
|
|
}
|
|
|
|
*StartVal = NextStart;
|
|
return(Rtv);
|
|
} /* DoCalcAddr */
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInitAssignRamToQueues() - allocate default queue sizes
|
|
*
|
|
* Description:
|
|
* This function assigns the memory to the different queues and ports.
|
|
* When DualNet is set to SK_TRUE all ports get the same amount of memory.
|
|
* Otherwise the first port gets most of the memory and all the
|
|
* other ports just the required minimum.
|
|
* This function can only be called when pAC->GIni.GIRamSize and
|
|
* pAC->GIni.GIMacsFound have been initialized, usually this happens
|
|
* at init level 1
|
|
*
|
|
* Returns:
|
|
* 0 - ok
|
|
* 1 - invalid input values
|
|
* 2 - not enough memory
|
|
*/
|
|
|
|
int SkGeInitAssignRamToQueues(
|
|
SK_AC *pAC, /* Adapter context */
|
|
int ActivePort, /* Active Port in RLMT mode */
|
|
SK_BOOL DualNet) /* adapter context */
|
|
{
|
|
int i;
|
|
int UsedKilobytes; /* memory already assigned */
|
|
int ActivePortKilobytes; /* memory available for active port */
|
|
SK_GEPORT *pGePort;
|
|
|
|
UsedKilobytes = 0;
|
|
|
|
if (ActivePort >= pAC->GIni.GIMacsFound) {
|
|
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
|
|
("SkGeInitAssignRamToQueues: ActivePort (%d) invalid\n",
|
|
ActivePort));
|
|
return(1);
|
|
}
|
|
if (((pAC->GIni.GIMacsFound * (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE)) +
|
|
((RAM_QUOTA_SYNC == 0) ? 0 : SK_MIN_TXQ_SIZE)) > pAC->GIni.GIRamSize) {
|
|
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
|
|
("SkGeInitAssignRamToQueues: Not enough memory (%d)\n",
|
|
pAC->GIni.GIRamSize));
|
|
return(2);
|
|
}
|
|
|
|
|
|
if (DualNet) {
|
|
/* every port gets the same amount of memory */
|
|
ActivePortKilobytes = pAC->GIni.GIRamSize / pAC->GIni.GIMacsFound;
|
|
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
|
|
|
|
pGePort = &pAC->GIni.GP[i];
|
|
|
|
/* take away the minimum memory for active queues */
|
|
ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
|
|
|
|
/* receive queue gets the minimum + 80% of the rest */
|
|
pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((
|
|
ActivePortKilobytes * (unsigned long) RAM_QUOTA_RX) / 100))
|
|
+ SK_MIN_RXQ_SIZE;
|
|
|
|
ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
|
|
|
|
/* synchronous transmit queue */
|
|
pGePort->PXSQSize = 0;
|
|
|
|
/* asynchronous transmit queue */
|
|
pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes +
|
|
SK_MIN_TXQ_SIZE);
|
|
}
|
|
}
|
|
else {
|
|
/* Rlmt Mode or single link adapter */
|
|
|
|
/* Set standby queue size defaults for all standby ports */
|
|
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
|
|
|
|
if (i != ActivePort) {
|
|
pGePort = &pAC->GIni.GP[i];
|
|
|
|
pGePort->PRxQSize = SK_MIN_RXQ_SIZE;
|
|
pGePort->PXAQSize = SK_MIN_TXQ_SIZE;
|
|
pGePort->PXSQSize = 0;
|
|
|
|
/* Count used RAM */
|
|
UsedKilobytes += pGePort->PRxQSize + pGePort->PXAQSize;
|
|
}
|
|
}
|
|
/* what's left? */
|
|
ActivePortKilobytes = pAC->GIni.GIRamSize - UsedKilobytes;
|
|
|
|
/* assign it to the active port */
|
|
/* first take away the minimum memory */
|
|
ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE);
|
|
pGePort = &pAC->GIni.GP[ActivePort];
|
|
|
|
/* receive queue get's the minimum + 80% of the rest */
|
|
pGePort->PRxQSize = (int) (ROUND_QUEUE_SIZE_KB((ActivePortKilobytes *
|
|
(unsigned long) RAM_QUOTA_RX) / 100)) + SK_MIN_RXQ_SIZE;
|
|
|
|
ActivePortKilobytes -= (pGePort->PRxQSize - SK_MIN_RXQ_SIZE);
|
|
|
|
/* synchronous transmit queue */
|
|
pGePort->PXSQSize = 0;
|
|
|
|
/* asynchronous transmit queue */
|
|
pGePort->PXAQSize = (int) ROUND_QUEUE_SIZE_KB(ActivePortKilobytes) +
|
|
SK_MIN_TXQ_SIZE;
|
|
}
|
|
#ifdef VCPU
|
|
VCPUprintf(0, "PRxQSize=%u, PXSQSize=%u, PXAQSize=%u\n",
|
|
pGePort->PRxQSize, pGePort->PXSQSize, pGePort->PXAQSize);
|
|
#endif /* VCPU */
|
|
|
|
return(0);
|
|
} /* SkGeInitAssignRamToQueues */
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeCheckQSize() - Checks the Adapters Queue Size Configuration
|
|
*
|
|
* Description:
|
|
* This function verifies the Queue Size Configuration specified
|
|
* in the variables PRxQSize, PXSQSize, and PXAQSize of all
|
|
* used ports.
|
|
* This requirements must be fullfilled to have a valid configuration:
|
|
* - The size of all queues must not exceed GIRamSize.
|
|
* - The queue sizes must be specified in units of 8 kB.
|
|
* - The size of Rx queues of available ports must not be
|
|
* smaller than 16 kB.
|
|
* - The size of at least one Tx queue (synch. or asynch.)
|
|
* of available ports must not be smaller than 16 kB
|
|
* when Jumbo Frames are used.
|
|
* - The RAM start and end addresses must not be changed
|
|
* for ports which are already initialized.
|
|
* Furthermore SkGeCheckQSize() defines the Start and End Addresses
|
|
* of all ports and stores them into the HWAC port structure.
|
|
*
|
|
* Returns:
|
|
* 0: Queue Size Configuration valid
|
|
* 1: Queue Size Configuration invalid
|
|
*/
|
|
static int SkGeCheckQSize(
|
|
SK_AC *pAC, /* adapter context */
|
|
int Port) /* port index */
|
|
{
|
|
SK_GEPORT *pPrt;
|
|
int UsedMem; /* total memory used (max. found ports) */
|
|
int i;
|
|
int Rtv;
|
|
int Rtv2;
|
|
SK_U32 StartAddr;
|
|
|
|
UsedMem = 0;
|
|
Rtv = 0;
|
|
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
|
|
pPrt = &pAC->GIni.GP[i];
|
|
|
|
if ((pPrt->PRxQSize & QZ_UNITS) != 0 ||
|
|
(pPrt->PXSQSize & QZ_UNITS) != 0 ||
|
|
(pPrt->PXAQSize & QZ_UNITS) != 0) {
|
|
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
|
|
return(1);
|
|
}
|
|
|
|
if (i == Port && pPrt->PRxQSize < SK_MIN_RXQ_SIZE) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG);
|
|
return(1);
|
|
}
|
|
|
|
/*
|
|
* the size of at least one Tx queue (synch. or asynch.) has to be > 0.
|
|
* if Jumbo Frames are used, this size has to be >= 16 kB.
|
|
*/
|
|
if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) ||
|
|
(pAC->GIni.GIPortUsage == SK_JUMBO_LINK &&
|
|
((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) ||
|
|
(pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG);
|
|
return(1);
|
|
}
|
|
|
|
UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize;
|
|
}
|
|
|
|
if (UsedMem > pAC->GIni.GIRamSize) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG);
|
|
return(1);
|
|
}
|
|
|
|
/* Now start address calculation */
|
|
StartAddr = pAC->GIni.GIRamOffs;
|
|
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
|
|
pPrt = &pAC->GIni.GP[i];
|
|
|
|
/* Calculate/Check values for the receive queue */
|
|
Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PRxQSize, &StartAddr,
|
|
&pPrt->PRxQRamStart, &pPrt->PRxQRamEnd);
|
|
Rtv |= Rtv2;
|
|
|
|
/* Calculate/Check values for the synchronous Tx queue */
|
|
Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXSQSize, &StartAddr,
|
|
&pPrt->PXsQRamStart, &pPrt->PXsQRamEnd);
|
|
Rtv |= Rtv2;
|
|
|
|
/* Calculate/Check values for the asynchronous Tx queue */
|
|
Rtv2 = DoCalcAddr(pAC, pPrt, pPrt->PXAQSize, &StartAddr,
|
|
&pPrt->PXaQRamStart, &pPrt->PXaQRamEnd);
|
|
Rtv |= Rtv2;
|
|
|
|
if (Rtv) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E013, SKERR_HWI_E013MSG);
|
|
return(1);
|
|
}
|
|
}
|
|
|
|
return(0);
|
|
} /* SkGeCheckQSize */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInitMacArb() - Initialize the MAC Arbiter
|
|
*
|
|
* Description:
|
|
* This function initializes the MAC Arbiter.
|
|
* It must not be called if there is still an
|
|
* initialized or active port.
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
static void SkGeInitMacArb(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC) /* IO context */
|
|
{
|
|
/* release local reset */
|
|
SK_OUT16(IoC, B3_MA_TO_CTRL, MA_RST_CLR);
|
|
|
|
/* configure timeout values */
|
|
SK_OUT8(IoC, B3_MA_TOINI_RX1, SK_MAC_TO_53);
|
|
SK_OUT8(IoC, B3_MA_TOINI_RX2, SK_MAC_TO_53);
|
|
SK_OUT8(IoC, B3_MA_TOINI_TX1, SK_MAC_TO_53);
|
|
SK_OUT8(IoC, B3_MA_TOINI_TX2, SK_MAC_TO_53);
|
|
|
|
SK_OUT8(IoC, B3_MA_RCINI_RX1, 0);
|
|
SK_OUT8(IoC, B3_MA_RCINI_RX2, 0);
|
|
SK_OUT8(IoC, B3_MA_RCINI_TX1, 0);
|
|
SK_OUT8(IoC, B3_MA_RCINI_TX2, 0);
|
|
|
|
/* recovery values are needed for XMAC II Rev. B2 only */
|
|
/* Fast Output Enable Mode was intended to use with Rev. B2, but now? */
|
|
|
|
/*
|
|
* There is no start or enable button to push, therefore
|
|
* the MAC arbiter is configured and enabled now.
|
|
*/
|
|
} /* SkGeInitMacArb */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInitPktArb() - Initialize the Packet Arbiter
|
|
*
|
|
* Description:
|
|
* This function initializes the Packet Arbiter.
|
|
* It must not be called if there is still an
|
|
* initialized or active port.
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
static void SkGeInitPktArb(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC) /* IO context */
|
|
{
|
|
/* release local reset */
|
|
SK_OUT16(IoC, B3_PA_CTRL, PA_RST_CLR);
|
|
|
|
/* configure timeout values */
|
|
SK_OUT16(IoC, B3_PA_TOINI_RX1, SK_PKT_TO_MAX);
|
|
SK_OUT16(IoC, B3_PA_TOINI_RX2, SK_PKT_TO_MAX);
|
|
SK_OUT16(IoC, B3_PA_TOINI_TX1, SK_PKT_TO_MAX);
|
|
SK_OUT16(IoC, B3_PA_TOINI_TX2, SK_PKT_TO_MAX);
|
|
|
|
/*
|
|
* enable timeout timers if jumbo frames not used
|
|
* NOTE: the packet arbiter timeout interrupt is needed for
|
|
* half duplex hangup workaround
|
|
*/
|
|
if (pAC->GIni.GIPortUsage != SK_JUMBO_LINK) {
|
|
if (pAC->GIni.GIMacsFound == 1) {
|
|
SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1);
|
|
}
|
|
else {
|
|
SK_OUT16(IoC, B3_PA_CTRL, PA_ENA_TO_TX1 | PA_ENA_TO_TX2);
|
|
}
|
|
}
|
|
} /* SkGeInitPktArb */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInitMacFifo() - Initialize the MAC FIFOs
|
|
*
|
|
* Description:
|
|
* Initialize all MAC FIFOs of the specified port
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
static void SkGeInitMacFifo(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Port) /* Port Index (MAC_1 + n) */
|
|
{
|
|
SK_U16 Word;
|
|
#ifdef VCPU
|
|
SK_U32 DWord;
|
|
#endif /* VCPU */
|
|
/*
|
|
* For each FIFO:
|
|
* - release local reset
|
|
* - use default value for MAC FIFO size
|
|
* - setup defaults for the control register
|
|
* - enable the FIFO
|
|
*/
|
|
|
|
Word = GMF_RX_CTRL_DEF;
|
|
|
|
if (pAC->GIni.GIGenesis) {
|
|
/* Configure Rx MAC FIFO */
|
|
SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR);
|
|
SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF);
|
|
SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD);
|
|
|
|
/* Configure Tx MAC FIFO */
|
|
SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR);
|
|
SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF);
|
|
SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD);
|
|
|
|
/* Enable frame flushing if jumbo frames used */
|
|
if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) {
|
|
SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH);
|
|
}
|
|
}
|
|
else {
|
|
/* set Rx GMAC FIFO Flush Mask */
|
|
SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK);
|
|
|
|
if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) {
|
|
|
|
Word &= ~GMF_RX_F_FL_ON;
|
|
}
|
|
|
|
/* Configure Rx MAC FIFO */
|
|
SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
|
|
SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word);
|
|
|
|
/* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */
|
|
SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
|
|
|
|
/* Configure Tx MAC FIFO */
|
|
SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR);
|
|
SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF);
|
|
|
|
#ifdef VCPU
|
|
SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord);
|
|
SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord);
|
|
#endif /* VCPU */
|
|
|
|
/* set Tx GMAC FIFO Almost Empty Threshold */
|
|
/* SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */
|
|
}
|
|
} /* SkGeInitMacFifo */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeLoadLnkSyncCnt() - Load the Link Sync Counter and starts counting
|
|
*
|
|
* Description:
|
|
* This function starts the Link Sync Counter of the specified
|
|
* port and enables the generation of an Link Sync IRQ.
|
|
* The Link Sync Counter may be used to detect an active link,
|
|
* if autonegotiation is not used.
|
|
*
|
|
* Note:
|
|
* o To ensure receiving the Link Sync Event the LinkSyncCounter
|
|
* should be initialized BEFORE clearing the XMAC's reset!
|
|
* o Enable IS_LNK_SYNC_M1 and IS_LNK_SYNC_M2 after calling this
|
|
* function.
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
void SkGeLoadLnkSyncCnt(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Port, /* Port Index (MAC_1 + n) */
|
|
SK_U32 CntVal) /* Counter value */
|
|
{
|
|
SK_U32 OrgIMsk;
|
|
SK_U32 NewIMsk;
|
|
SK_U32 ISrc;
|
|
SK_BOOL IrqPend;
|
|
|
|
/* stop counter */
|
|
SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_STOP);
|
|
|
|
/*
|
|
* ASIC problem:
|
|
* Each time starting the Link Sync Counter an IRQ is generated
|
|
* by the adapter. See problem report entry from 21.07.98
|
|
*
|
|
* Workaround: Disable Link Sync IRQ and clear the unexpeced IRQ
|
|
* if no IRQ is already pending.
|
|
*/
|
|
IrqPend = SK_FALSE;
|
|
SK_IN32(IoC, B0_ISRC, &ISrc);
|
|
SK_IN32(IoC, B0_IMSK, &OrgIMsk);
|
|
if (Port == MAC_1) {
|
|
NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M1;
|
|
if ((ISrc & IS_LNK_SYNC_M1) != 0) {
|
|
IrqPend = SK_TRUE;
|
|
}
|
|
}
|
|
else {
|
|
NewIMsk = OrgIMsk & ~IS_LNK_SYNC_M2;
|
|
if ((ISrc & IS_LNK_SYNC_M2) != 0) {
|
|
IrqPend = SK_TRUE;
|
|
}
|
|
}
|
|
if (!IrqPend) {
|
|
SK_OUT32(IoC, B0_IMSK, NewIMsk);
|
|
}
|
|
|
|
/* load counter */
|
|
SK_OUT32(IoC, MR_ADDR(Port, LNK_SYNC_INI), CntVal);
|
|
|
|
/* start counter */
|
|
SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_START);
|
|
|
|
if (!IrqPend) {
|
|
/* clear the unexpected IRQ, and restore the interrupt mask */
|
|
SK_OUT8(IoC, MR_ADDR(Port, LNK_SYNC_CTRL), LED_CLR_IRQ);
|
|
SK_OUT32(IoC, B0_IMSK, OrgIMsk);
|
|
}
|
|
} /* SkGeLoadLnkSyncCnt*/
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeCfgSync() - Configure synchronous bandwidth for this port.
|
|
*
|
|
* Description:
|
|
* This function may be used to configure synchronous bandwidth
|
|
* to the specified port. This may be done any time after
|
|
* initializing the port. The configuration values are NOT saved
|
|
* in the HWAC port structure and will be overwritten any
|
|
* time when stopping and starting the port.
|
|
* Any values for the synchronous configuration will be ignored
|
|
* if the size of the synchronous queue is zero!
|
|
*
|
|
* The default configuration for the synchronous service is
|
|
* TXA_ENA_FSYNC. This means if the size of
|
|
* the synchronous queue is unequal zero but no specific
|
|
* synchronous bandwidth is configured, the synchronous queue
|
|
* will always have the 'unlimited' transmit priority!
|
|
*
|
|
* This mode will be restored if the synchronous bandwidth is
|
|
* deallocated ('IntTime' = 0 and 'LimCount' = 0).
|
|
*
|
|
* Returns:
|
|
* 0: success
|
|
* 1: parameter configuration error
|
|
* 2: try to configure quality of service although no
|
|
* synchronous queue is configured
|
|
*/
|
|
int SkGeCfgSync(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Port, /* Port Index (MAC_1 + n) */
|
|
SK_U32 IntTime, /* Interval Timer Value in units of 8ns */
|
|
SK_U32 LimCount, /* Number of bytes to transfer during IntTime */
|
|
int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */
|
|
{
|
|
int Rtv;
|
|
|
|
Rtv = 0;
|
|
|
|
/* check the parameters */
|
|
if (LimCount > IntTime ||
|
|
(LimCount == 0 && IntTime != 0) ||
|
|
(LimCount != 0 && IntTime == 0)) {
|
|
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
|
|
return(1);
|
|
}
|
|
|
|
if (pAC->GIni.GP[Port].PXSQSize == 0) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG);
|
|
return(2);
|
|
}
|
|
|
|
/* calculate register values */
|
|
IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100;
|
|
LimCount = LimCount / 8;
|
|
|
|
if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG);
|
|
return(1);
|
|
}
|
|
|
|
/*
|
|
* - Enable 'Force Sync' to ensure the synchronous queue
|
|
* has the priority while configuring the new values.
|
|
* - Also 'disable alloc' to ensure the settings complies
|
|
* to the SyncMode parameter.
|
|
* - Disable 'Rate Control' to configure the new values.
|
|
* - write IntTime and LimCount
|
|
* - start 'Rate Control' and disable 'Force Sync'
|
|
* if Interval Timer or Limit Counter not zero.
|
|
*/
|
|
SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
|
|
TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
|
|
|
|
SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime);
|
|
SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount);
|
|
|
|
SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
|
|
(SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC)));
|
|
|
|
if (IntTime != 0 || LimCount != 0) {
|
|
SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC);
|
|
}
|
|
|
|
return(0);
|
|
} /* SkGeCfgSync */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* DoInitRamQueue() - Initialize the RAM Buffer Address of a single Queue
|
|
*
|
|
* Desccription:
|
|
* If the queue is used, enable and initialize it.
|
|
* Make sure the queue is still reset, if it is not used.
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
static void DoInitRamQueue(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int QuIoOffs, /* Queue IO Address Offset */
|
|
SK_U32 QuStartAddr, /* Queue Start Address */
|
|
SK_U32 QuEndAddr, /* Queue End Address */
|
|
int QuType) /* Queue Type (SK_RX_SRAM_Q|SK_RX_BRAM_Q|SK_TX_RAM_Q) */
|
|
{
|
|
SK_U32 RxUpThresVal;
|
|
SK_U32 RxLoThresVal;
|
|
|
|
if (QuStartAddr != QuEndAddr) {
|
|
/* calculate thresholds, assume we have a big Rx queue */
|
|
RxUpThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_ULPP) / 8;
|
|
RxLoThresVal = (QuEndAddr + 1 - QuStartAddr - SK_RB_LLPP_B)/8;
|
|
|
|
/* build HW address format */
|
|
QuStartAddr = QuStartAddr / 8;
|
|
QuEndAddr = QuEndAddr / 8;
|
|
|
|
/* release local reset */
|
|
SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_CLR);
|
|
|
|
/* configure addresses */
|
|
SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_START), QuStartAddr);
|
|
SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_END), QuEndAddr);
|
|
SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_WP), QuStartAddr);
|
|
SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RP), QuStartAddr);
|
|
|
|
switch (QuType) {
|
|
case SK_RX_SRAM_Q:
|
|
/* configure threshold for small Rx Queue */
|
|
RxLoThresVal += (SK_RB_LLPP_B - SK_RB_LLPP_S) / 8;
|
|
|
|
/* continue with SK_RX_BRAM_Q */
|
|
case SK_RX_BRAM_Q:
|
|
/* write threshold for Rx Queue */
|
|
|
|
SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_UTPP), RxUpThresVal);
|
|
SK_OUT32(IoC, RB_ADDR(QuIoOffs, RB_RX_LTPP), RxLoThresVal);
|
|
|
|
/* the high priority threshold not used */
|
|
break;
|
|
case SK_TX_RAM_Q:
|
|
/*
|
|
* Do NOT use Store & Forward under normal operation due to
|
|
* performance optimization (GENESIS only).
|
|
* But if Jumbo Frames are configured (XMAC Tx FIFO is only 4 kB)
|
|
* or YUKON is used ((GMAC Tx FIFO is only 1 kB)
|
|
* we NEED Store & Forward of the RAM buffer.
|
|
*/
|
|
if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK ||
|
|
!pAC->GIni.GIGenesis) {
|
|
/* enable Store & Forward Mode for the Tx Side */
|
|
SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_STFWD);
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* set queue operational */
|
|
SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_ENA_OP_MD);
|
|
}
|
|
else {
|
|
/* ensure the queue is still disabled */
|
|
SK_OUT8(IoC, RB_ADDR(QuIoOffs, RB_CTRL), RB_RST_SET);
|
|
}
|
|
} /* DoInitRamQueue */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInitRamBufs() - Initialize the RAM Buffer Queues
|
|
*
|
|
* Description:
|
|
* Initialize all RAM Buffer Queues of the specified port
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
static void SkGeInitRamBufs(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Port) /* Port Index (MAC_1 + n) */
|
|
{
|
|
SK_GEPORT *pPrt;
|
|
int RxQType;
|
|
|
|
pPrt = &pAC->GIni.GP[Port];
|
|
|
|
if (pPrt->PRxQSize == SK_MIN_RXQ_SIZE) {
|
|
RxQType = SK_RX_SRAM_Q; /* small Rx Queue */
|
|
}
|
|
else {
|
|
RxQType = SK_RX_BRAM_Q; /* big Rx Queue */
|
|
}
|
|
|
|
DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart,
|
|
pPrt->PRxQRamEnd, RxQType);
|
|
|
|
DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart,
|
|
pPrt->PXsQRamEnd, SK_TX_RAM_Q);
|
|
|
|
DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart,
|
|
pPrt->PXaQRamEnd, SK_TX_RAM_Q);
|
|
|
|
} /* SkGeInitRamBufs */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInitRamIface() - Initialize the RAM Interface
|
|
*
|
|
* Description:
|
|
* This function initializes the Adapters RAM Interface.
|
|
*
|
|
* Note:
|
|
* This function is used in the diagnostics.
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
void SkGeInitRamIface(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC) /* IO context */
|
|
{
|
|
/* release local reset */
|
|
SK_OUT16(IoC, B3_RI_CTRL, RI_RST_CLR);
|
|
|
|
/* configure timeout values */
|
|
SK_OUT8(IoC, B3_RI_WTO_R1, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_WTO_XA1, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_WTO_XS1, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_RTO_R1, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_RTO_XA1, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_RTO_XS1, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_WTO_R2, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_WTO_XA2, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_WTO_XS2, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_RTO_R2, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_RTO_XA2, SK_RI_TO_53);
|
|
SK_OUT8(IoC, B3_RI_RTO_XS2, SK_RI_TO_53);
|
|
|
|
} /* SkGeInitRamIface */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInitBmu() - Initialize the BMU state machines
|
|
*
|
|
* Description:
|
|
* Initialize all BMU state machines of the specified port
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
static void SkGeInitBmu(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Port) /* Port Index (MAC_1 + n) */
|
|
{
|
|
SK_GEPORT *pPrt;
|
|
SK_U32 RxWm;
|
|
SK_U32 TxWm;
|
|
|
|
pPrt = &pAC->GIni.GP[Port];
|
|
|
|
RxWm = SK_BMU_RX_WM;
|
|
TxWm = SK_BMU_TX_WM;
|
|
|
|
if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) {
|
|
/* for better performance */
|
|
RxWm /= 2;
|
|
TxWm /= 2;
|
|
}
|
|
|
|
/* Rx Queue: Release all local resets and set the watermark */
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_CLR_RESET);
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_F), RxWm);
|
|
|
|
/*
|
|
* Tx Queue: Release all local resets if the queue is used !
|
|
* set watermark
|
|
*/
|
|
if (pPrt->PXSQSize != 0) {
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET);
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm);
|
|
}
|
|
|
|
if (pPrt->PXAQSize != 0) {
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET);
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm);
|
|
}
|
|
/*
|
|
* Do NOT enable the descriptor poll timers here, because
|
|
* the descriptor addresses are not specified yet.
|
|
*/
|
|
} /* SkGeInitBmu */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* TestStopBit() - Test the stop bit of the queue
|
|
*
|
|
* Description:
|
|
* Stopping a queue is not as simple as it seems to be.
|
|
* If descriptor polling is enabled, it may happen
|
|
* that RX/TX stop is done and SV idle is NOT set.
|
|
* In this case we have to issue another stop command.
|
|
*
|
|
* Returns:
|
|
* The queues control status register
|
|
*/
|
|
static SK_U32 TestStopBit(
|
|
SK_AC *pAC, /* Adapter Context */
|
|
SK_IOC IoC, /* IO Context */
|
|
int QuIoOffs) /* Queue IO Address Offset */
|
|
{
|
|
SK_U32 QuCsr; /* CSR contents */
|
|
|
|
SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
|
|
|
|
if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) {
|
|
/* Stop Descriptor overridden by start command */
|
|
SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP);
|
|
|
|
SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr);
|
|
}
|
|
|
|
return(QuCsr);
|
|
} /* TestStopBit */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeStopPort() - Stop the Rx/Tx activity of the port 'Port'.
|
|
*
|
|
* Description:
|
|
* After calling this function the descriptor rings and Rx and Tx
|
|
* queues of this port may be reconfigured.
|
|
*
|
|
* It is possible to stop the receive and transmit path separate or
|
|
* both together.
|
|
*
|
|
* Dir = SK_STOP_TX Stops the transmit path only and resets the MAC.
|
|
* The receive queue is still active and
|
|
* the pending Rx frames may be still transferred
|
|
* into the RxD.
|
|
* SK_STOP_RX Stop the receive path. The tansmit path
|
|
* has to be stopped once before.
|
|
* SK_STOP_ALL SK_STOP_TX + SK_STOP_RX
|
|
*
|
|
* RstMode = SK_SOFT_RST Resets the MAC. The PHY is still alive.
|
|
* SK_HARD_RST Resets the MAC and the PHY.
|
|
*
|
|
* Example:
|
|
* 1) A Link Down event was signaled for a port. Therefore the activity
|
|
* of this port should be stopped and a hardware reset should be issued
|
|
* to enable the workaround of XMAC errata #2. But the received frames
|
|
* should not be discarded.
|
|
* ...
|
|
* SkGeStopPort(pAC, IoC, Port, SK_STOP_TX, SK_HARD_RST);
|
|
* (transfer all pending Rx frames)
|
|
* SkGeStopPort(pAC, IoC, Port, SK_STOP_RX, SK_HARD_RST);
|
|
* ...
|
|
*
|
|
* 2) An event was issued which request the driver to switch
|
|
* the 'virtual active' link to an other already active port
|
|
* as soon as possible. The frames in the receive queue of this
|
|
* port may be lost. But the PHY must not be reset during this
|
|
* event.
|
|
* ...
|
|
* SkGeStopPort(pAC, IoC, Port, SK_STOP_ALL, SK_SOFT_RST);
|
|
* ...
|
|
*
|
|
* Extended Description:
|
|
* If SK_STOP_TX is set,
|
|
* o disable the MAC's receive and transmitter to prevent
|
|
* from sending incomplete frames
|
|
* o stop the port's transmit queues before terminating the
|
|
* BMUs to prevent from performing incomplete PCI cycles
|
|
* on the PCI bus
|
|
* - The network Rx and Tx activity and PCI Tx transfer is
|
|
* disabled now.
|
|
* o reset the MAC depending on the RstMode
|
|
* o Stop Interval Timer and Limit Counter of Tx Arbiter,
|
|
* also disable Force Sync bit and Enable Alloc bit.
|
|
* o perform a local reset of the port's Tx path
|
|
* - reset the PCI FIFO of the async Tx queue
|
|
* - reset the PCI FIFO of the sync Tx queue
|
|
* - reset the RAM Buffer async Tx queue
|
|
* - reset the RAM Buffer sync Tx queue
|
|
* - reset the MAC Tx FIFO
|
|
* o switch Link and Tx LED off, stop the LED counters
|
|
*
|
|
* If SK_STOP_RX is set,
|
|
* o stop the port's receive queue
|
|
* - The path data transfer activity is fully stopped now.
|
|
* o perform a local reset of the port's Rx path
|
|
* - reset the PCI FIFO of the Rx queue
|
|
* - reset the RAM Buffer receive queue
|
|
* - reset the MAC Rx FIFO
|
|
* o switch Rx LED off, stop the LED counter
|
|
*
|
|
* If all ports are stopped,
|
|
* o reset the RAM Interface.
|
|
*
|
|
* Notes:
|
|
* o This function may be called during the driver states RESET_PORT and
|
|
* SWITCH_PORT.
|
|
*/
|
|
void SkGeStopPort(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* I/O context */
|
|
int Port, /* port to stop (MAC_1 + n) */
|
|
int Dir, /* Direction to Stop (SK_STOP_RX, SK_STOP_TX, SK_STOP_ALL) */
|
|
int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */
|
|
{
|
|
#ifndef SK_DIAG
|
|
SK_EVPARA Para;
|
|
#endif /* !SK_DIAG */
|
|
SK_GEPORT *pPrt;
|
|
SK_U32 DWord;
|
|
SK_U32 XsCsr;
|
|
SK_U32 XaCsr;
|
|
SK_U64 ToutStart;
|
|
int i;
|
|
int ToutCnt;
|
|
|
|
pPrt = &pAC->GIni.GP[Port];
|
|
|
|
if ((Dir & SK_STOP_TX) != 0) {
|
|
/* disable receiver and transmitter */
|
|
SkMacRxTxDisable(pAC, IoC, Port);
|
|
|
|
/* stop both transmit queues */
|
|
/*
|
|
* If the BMU is in the reset state CSR_STOP will terminate
|
|
* immediately.
|
|
*/
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_STOP);
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_STOP);
|
|
|
|
ToutStart = SkOsGetTime(pAC);
|
|
ToutCnt = 0;
|
|
do {
|
|
/*
|
|
* Clear packet arbiter timeout to make sure
|
|
* this loop will terminate.
|
|
*/
|
|
SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_TX1 :
|
|
PA_CLR_TO_TX2);
|
|
|
|
/*
|
|
* If the transfer stucks at the MAC the STOP command will not
|
|
* terminate if we don't flush the XMAC's transmit FIFO !
|
|
*/
|
|
SkMacFlushTxFifo(pAC, IoC, Port);
|
|
|
|
XsCsr = TestStopBit(pAC, IoC, pPrt->PXsQOff);
|
|
XaCsr = TestStopBit(pAC, IoC, pPrt->PXaQOff);
|
|
|
|
if (SkOsGetTime(pAC) - ToutStart > (SK_TICKS_PER_SEC / 18)) {
|
|
/*
|
|
* Timeout of 1/18 second reached.
|
|
* This needs to be checked at 1/18 sec only.
|
|
*/
|
|
ToutCnt++;
|
|
if (ToutCnt > 1) {
|
|
/* Might be a problem when the driver event handler
|
|
* calls StopPort again. XXX.
|
|
*/
|
|
|
|
/* Fatal Error, Loop aborted */
|
|
SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E018,
|
|
SKERR_HWI_E018MSG);
|
|
#ifndef SK_DIAG
|
|
Para.Para64 = Port;
|
|
SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_FAIL, Para);
|
|
#endif /* !SK_DIAG */
|
|
return;
|
|
}
|
|
/*
|
|
* Cache incoherency workaround: Assume a start command
|
|
* has been lost while sending the frame.
|
|
*/
|
|
ToutStart = SkOsGetTime(pAC);
|
|
|
|
if ((XsCsr & CSR_STOP) != 0) {
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_START);
|
|
}
|
|
if ((XaCsr & CSR_STOP) != 0) {
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_START);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Because of the ASIC problem report entry from 21.08.1998 it is
|
|
* required to wait until CSR_STOP is reset and CSR_SV_IDLE is set.
|
|
*/
|
|
} while ((XsCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE ||
|
|
(XaCsr & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
|
|
|
|
/* Reset the MAC depending on the RstMode */
|
|
if (RstMode == SK_SOFT_RST) {
|
|
SkMacSoftRst(pAC, IoC, Port);
|
|
}
|
|
else {
|
|
SkMacHardRst(pAC, IoC, Port);
|
|
}
|
|
|
|
/* Disable Force Sync bit and Enable Alloc bit */
|
|
SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL),
|
|
TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
|
|
|
|
/* Stop Interval Timer and Limit Counter of Tx Arbiter */
|
|
SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L);
|
|
SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L);
|
|
|
|
/* Perform a local reset of the port's Tx path */
|
|
|
|
/* Reset the PCI FIFO of the async Tx queue */
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_SET_RESET);
|
|
/* Reset the PCI FIFO of the sync Tx queue */
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_SET_RESET);
|
|
/* Reset the RAM Buffer async Tx queue */
|
|
SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET);
|
|
/* Reset the RAM Buffer sync Tx queue */
|
|
SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET);
|
|
|
|
/* Reset Tx MAC FIFO */
|
|
if (pAC->GIni.GIGenesis) {
|
|
/* Note: MFF_RST_SET does NOT reset the XMAC ! */
|
|
SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_SET);
|
|
|
|
/* switch Link and Tx LED off, stop the LED counters */
|
|
/* Link LED is switched off by the RLMT and the Diag itself */
|
|
SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_DIS);
|
|
}
|
|
else {
|
|
/* Reset TX MAC FIFO */
|
|
SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
|
|
}
|
|
}
|
|
|
|
if ((Dir & SK_STOP_RX) != 0) {
|
|
/*
|
|
* The RX Stop Command will not terminate if no buffers
|
|
* are queued in the RxD ring. But it will always reach
|
|
* the Idle state. Therefore we can use this feature to
|
|
* stop the transfer of received packets.
|
|
*/
|
|
/* stop the port's receive queue */
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP);
|
|
|
|
i = 100;
|
|
do {
|
|
/*
|
|
* Clear packet arbiter timeout to make sure
|
|
* this loop will terminate
|
|
*/
|
|
SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_RX1 :
|
|
PA_CLR_TO_RX2);
|
|
|
|
DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff);
|
|
|
|
/* timeout if i==0 (bug fix for #10748) */
|
|
if (--i == 0) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E024,
|
|
SKERR_HWI_E024MSG);
|
|
break;
|
|
}
|
|
/*
|
|
* because of the ASIC problem report entry from 21.08.98
|
|
* it is required to wait until CSR_STOP is reset and
|
|
* CSR_SV_IDLE is set.
|
|
*/
|
|
} while ((DWord & (CSR_STOP | CSR_SV_IDLE)) != CSR_SV_IDLE);
|
|
|
|
/* The path data transfer activity is fully stopped now */
|
|
|
|
/* Perform a local reset of the port's Rx path */
|
|
|
|
/* Reset the PCI FIFO of the Rx queue */
|
|
SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_SET_RESET);
|
|
/* Reset the RAM Buffer receive queue */
|
|
SK_OUT8(IoC, RB_ADDR(pPrt->PRxQOff, RB_CTRL), RB_RST_SET);
|
|
|
|
/* Reset Rx MAC FIFO */
|
|
if (pAC->GIni.GIGenesis) {
|
|
|
|
SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET);
|
|
|
|
/* switch Rx LED off, stop the LED counter */
|
|
SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_DIS);
|
|
}
|
|
else {
|
|
/* Reset Rx MAC FIFO */
|
|
SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_SET);
|
|
}
|
|
}
|
|
} /* SkGeStopPort */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInit0() - Level 0 Initialization
|
|
*
|
|
* Description:
|
|
* - Initialize the BMU address offsets
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
static void SkGeInit0(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC) /* IO context */
|
|
{
|
|
int i;
|
|
SK_GEPORT *pPrt;
|
|
|
|
for (i = 0; i < SK_MAX_MACS; i++) {
|
|
pPrt = &pAC->GIni.GP[i];
|
|
|
|
pPrt->PState = SK_PRT_RESET;
|
|
pPrt->PRxQOff = QOffTab[i].RxQOff;
|
|
pPrt->PXsQOff = QOffTab[i].XsQOff;
|
|
pPrt->PXaQOff = QOffTab[i].XaQOff;
|
|
pPrt->PCheckPar = SK_FALSE;
|
|
pPrt->PIsave = 0;
|
|
pPrt->PPrevShorts = 0;
|
|
pPrt->PLinkResCt = 0;
|
|
pPrt->PAutoNegTOCt = 0;
|
|
pPrt->PPrevRx = 0;
|
|
pPrt->PPrevFcs = 0;
|
|
pPrt->PRxLim = SK_DEF_RX_WA_LIM;
|
|
pPrt->PLinkMode = SK_LMODE_AUTOFULL;
|
|
pPrt->PLinkSpeedCap = SK_LSPEED_CAP_1000MBPS;
|
|
pPrt->PLinkSpeed = SK_LSPEED_1000MBPS;
|
|
pPrt->PLinkSpeedUsed = SK_LSPEED_STAT_UNKNOWN;
|
|
pPrt->PLinkModeConf = SK_LMODE_AUTOSENSE;
|
|
pPrt->PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM;
|
|
pPrt->PLinkBroken = SK_TRUE; /* See WA code */
|
|
pPrt->PLinkCap = (SK_LMODE_CAP_HALF | SK_LMODE_CAP_FULL |
|
|
SK_LMODE_CAP_AUTOHALF | SK_LMODE_CAP_AUTOFULL);
|
|
pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN;
|
|
pPrt->PFlowCtrlCap = SK_FLOW_MODE_SYM_OR_REM;
|
|
pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE;
|
|
pPrt->PMSCap = 0;
|
|
pPrt->PMSMode = SK_MS_MODE_AUTO;
|
|
pPrt->PMSStatus = SK_MS_STAT_UNSET;
|
|
pPrt->PAutoNegFail = SK_FALSE;
|
|
pPrt->PLipaAutoNeg = SK_LIPA_UNKNOWN;
|
|
pPrt->PHWLinkUp = SK_FALSE;
|
|
}
|
|
|
|
pAC->GIni.GIPortUsage = SK_RED_LINK;
|
|
|
|
} /* SkGeInit0*/
|
|
|
|
#ifdef SK_PCI_RESET
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGePciReset() - Reset PCI interface
|
|
*
|
|
* Description:
|
|
* o Read PCI configuration.
|
|
* o Change power state to 3.
|
|
* o Change power state to 0.
|
|
* o Restore PCI configuration.
|
|
*
|
|
* Returns:
|
|
* 0: Success.
|
|
* 1: Power state could not be changed to 3.
|
|
*/
|
|
static int SkGePciReset(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC) /* IO context */
|
|
{
|
|
int i;
|
|
SK_U16 PmCtlSts;
|
|
SK_U32 Bp1;
|
|
SK_U32 Bp2;
|
|
SK_U16 PciCmd;
|
|
SK_U8 Cls;
|
|
SK_U8 Lat;
|
|
SK_U8 ConfigSpace[PCI_CFG_SIZE];
|
|
|
|
/*
|
|
* Note: Switching to D3 state is like a software reset.
|
|
* Switching from D3 to D0 is a hardware reset.
|
|
* We have to save and restore the configuration space.
|
|
*/
|
|
for (i = 0; i < PCI_CFG_SIZE; i++) {
|
|
SkPciReadCfgDWord(pAC, i*4, &ConfigSpace[i]);
|
|
}
|
|
|
|
/* We know the RAM Interface Arbiter is enabled. */
|
|
SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D3);
|
|
SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
|
|
|
|
if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D3) {
|
|
return(1);
|
|
}
|
|
|
|
/* Return to D0 state. */
|
|
SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D0);
|
|
|
|
/* Check for D0 state. */
|
|
SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts);
|
|
|
|
if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D0) {
|
|
return(1);
|
|
}
|
|
|
|
/* Check PCI Config Registers. */
|
|
SkPciReadCfgWord(pAC, PCI_COMMAND, &PciCmd);
|
|
SkPciReadCfgByte(pAC, PCI_CACHE_LSZ, &Cls);
|
|
SkPciReadCfgDWord(pAC, PCI_BASE_1ST, &Bp1);
|
|
SkPciReadCfgDWord(pAC, PCI_BASE_2ND, &Bp2);
|
|
SkPciReadCfgByte(pAC, PCI_LAT_TIM, &Lat);
|
|
|
|
if (PciCmd != 0 || Cls != 0 || (Bp1 & 0xfffffff0L) != 0 || Bp2 != 1 ||
|
|
Lat != 0) {
|
|
return(1);
|
|
}
|
|
|
|
/* Restore PCI Config Space. */
|
|
for (i = 0; i < PCI_CFG_SIZE; i++) {
|
|
SkPciWriteCfgDWord(pAC, i*4, ConfigSpace[i]);
|
|
}
|
|
|
|
return(0);
|
|
} /* SkGePciReset */
|
|
|
|
#endif /* SK_PCI_RESET */
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInit1() - Level 1 Initialization
|
|
*
|
|
* Description:
|
|
* o Do a software reset.
|
|
* o Clear all reset bits.
|
|
* o Verify that the detected hardware is present.
|
|
* Return an error if not.
|
|
* o Get the hardware configuration
|
|
* + Read the number of MACs/Ports.
|
|
* + Read the RAM size.
|
|
* + Read the PCI Revision Id.
|
|
* + Find out the adapters host clock speed
|
|
* + Read and check the PHY type
|
|
*
|
|
* Returns:
|
|
* 0: success
|
|
* 5: Unexpected PHY type detected
|
|
* 6: HW self test failed
|
|
*/
|
|
static int SkGeInit1(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC) /* IO context */
|
|
{
|
|
SK_U8 Byte;
|
|
SK_U16 Word;
|
|
SK_U16 CtrlStat;
|
|
SK_U32 FlashAddr;
|
|
int RetVal;
|
|
int i;
|
|
|
|
RetVal = 0;
|
|
|
|
/* save CLK_RUN bits (YUKON-Lite) */
|
|
SK_IN16(IoC, B0_CTST, &CtrlStat);
|
|
|
|
#ifdef SK_PCI_RESET
|
|
(void)SkGePciReset(pAC, IoC);
|
|
#endif /* SK_PCI_RESET */
|
|
|
|
/* do the SW-reset */
|
|
SK_OUT8(IoC, B0_CTST, CS_RST_SET);
|
|
|
|
/* release the SW-reset */
|
|
SK_OUT8(IoC, B0_CTST, CS_RST_CLR);
|
|
|
|
/* reset all error bits in the PCI STATUS register */
|
|
/*
|
|
* Note: PCI Cfg cycles cannot be used, because they are not
|
|
* available on some platforms after 'boot time'.
|
|
*/
|
|
SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
|
|
|
|
SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
|
|
SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
|
|
/* release Master Reset */
|
|
SK_OUT8(IoC, B0_CTST, CS_MRST_CLR);
|
|
|
|
#ifdef CLK_RUN
|
|
CtrlStat |= CS_CLK_RUN_ENA;
|
|
#endif /* CLK_RUN */
|
|
|
|
/* restore CLK_RUN bits */
|
|
SK_OUT16(IoC, B0_CTST, CtrlStat &
|
|
(CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA));
|
|
|
|
/* read Chip Identification Number */
|
|
SK_IN8(IoC, B2_CHIP_ID, &Byte);
|
|
pAC->GIni.GIChipId = Byte;
|
|
|
|
/* read number of MACs */
|
|
SK_IN8(IoC, B2_MAC_CFG, &Byte);
|
|
pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2;
|
|
|
|
/* get Chip Revision Number */
|
|
pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4);
|
|
|
|
/* get diff. PCI parameters */
|
|
SK_IN16(IoC, B0_CTST, &CtrlStat);
|
|
|
|
/* read the adapters RAM size */
|
|
SK_IN8(IoC, B2_E_0, &Byte);
|
|
|
|
if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) {
|
|
|
|
pAC->GIni.GIGenesis = SK_TRUE;
|
|
|
|
if (Byte == 3) {
|
|
/* special case: 4 x 64k x 36, offset = 0x80000 */
|
|
pAC->GIni.GIRamSize = 1024;
|
|
pAC->GIni.GIRamOffs = (SK_U32)512 * 1024;
|
|
}
|
|
else {
|
|
pAC->GIni.GIRamSize = (int)Byte * 512;
|
|
pAC->GIni.GIRamOffs = 0;
|
|
}
|
|
/* all GE adapters work with 53.125 MHz host clock */
|
|
pAC->GIni.GIHstClkFact = SK_FACT_53;
|
|
|
|
/* set Descr. Poll Timer Init Value to 250 ms */
|
|
pAC->GIni.GIPollTimerVal =
|
|
SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100;
|
|
}
|
|
else {
|
|
pAC->GIni.GIGenesis = SK_FALSE;
|
|
|
|
#ifndef VCPU
|
|
pAC->GIni.GIRamSize = (Byte == 0) ? 128 : (int)Byte * 4;
|
|
#else
|
|
pAC->GIni.GIRamSize = 128;
|
|
#endif
|
|
pAC->GIni.GIRamOffs = 0;
|
|
|
|
/* WA for chip Rev. A */
|
|
pAC->GIni.GIWolOffs = (pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0;
|
|
|
|
/* get PM Capabilities of PCI config space */
|
|
SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word);
|
|
|
|
/* check if VAUX is available */
|
|
if (((CtrlStat & CS_VAUX_AVAIL) != 0) &&
|
|
/* check also if PME from D3cold is set */
|
|
((Word & PCI_PME_D3C_SUP) != 0)) {
|
|
/* set entry in GE init struct */
|
|
pAC->GIni.GIVauxAvail = SK_TRUE;
|
|
}
|
|
|
|
/* save Flash-Address Register */
|
|
SK_IN32(IoC, B2_FAR, &FlashAddr);
|
|
|
|
/* test Flash-Address Register */
|
|
SK_OUT8(IoC, B2_FAR + 3, 0xff);
|
|
SK_IN8(IoC, B2_FAR + 3, &Byte);
|
|
|
|
pAC->GIni.GIYukonLite = (SK_BOOL)(Byte != 0);
|
|
|
|
/* restore Flash-Address Register */
|
|
SK_OUT32(IoC, B2_FAR, FlashAddr);
|
|
|
|
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
|
|
/* set GMAC Link Control reset */
|
|
SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_SET);
|
|
|
|
/* clear GMAC Link Control reset */
|
|
SK_OUT16(IoC, MR_ADDR(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
|
|
}
|
|
/* all YU chips work with 78.125 MHz host clock */
|
|
pAC->GIni.GIHstClkFact = SK_FACT_78;
|
|
|
|
pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; /* 215 ms */
|
|
}
|
|
|
|
/* check if 64-bit PCI Slot is present */
|
|
pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0);
|
|
|
|
/* check if 66 MHz PCI Clock is active */
|
|
pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0);
|
|
|
|
/* read PCI HW Revision Id. */
|
|
SK_IN8(IoC, PCI_C(PCI_REV_ID), &Byte);
|
|
pAC->GIni.GIPciHwRev = Byte;
|
|
|
|
/* read the PMD type */
|
|
SK_IN8(IoC, B2_PMD_TYP, &Byte);
|
|
pAC->GIni.GICopperType = (SK_U8)(Byte == 'T');
|
|
|
|
/* read the PHY type */
|
|
SK_IN8(IoC, B2_E_1, &Byte);
|
|
|
|
Byte &= 0x0f; /* the PHY type is stored in the lower nibble */
|
|
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
|
|
|
|
if (pAC->GIni.GIGenesis) {
|
|
switch (Byte) {
|
|
case SK_PHY_XMAC:
|
|
pAC->GIni.GP[i].PhyAddr = PHY_ADDR_XMAC;
|
|
break;
|
|
case SK_PHY_BCOM:
|
|
pAC->GIni.GP[i].PhyAddr = PHY_ADDR_BCOM;
|
|
pAC->GIni.GP[i].PMSCap =
|
|
SK_MS_CAP_AUTO | SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE;
|
|
break;
|
|
#ifdef OTHER_PHY
|
|
case SK_PHY_LONE:
|
|
pAC->GIni.GP[i].PhyAddr = PHY_ADDR_LONE;
|
|
break;
|
|
case SK_PHY_NAT:
|
|
pAC->GIni.GP[i].PhyAddr = PHY_ADDR_NAT;
|
|
break;
|
|
#endif /* OTHER_PHY */
|
|
default:
|
|
/* ERROR: unexpected PHY type detected */
|
|
RetVal = 5;
|
|
break;
|
|
}
|
|
}
|
|
else {
|
|
if (Byte == 0) {
|
|
/* if this field is not initialized */
|
|
Byte = SK_PHY_MARV_COPPER;
|
|
pAC->GIni.GICopperType = SK_TRUE;
|
|
}
|
|
pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV;
|
|
|
|
if (pAC->GIni.GICopperType) {
|
|
pAC->GIni.GP[i].PLinkSpeedCap = SK_LSPEED_CAP_AUTO |
|
|
SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS |
|
|
SK_LSPEED_CAP_1000MBPS;
|
|
pAC->GIni.GP[i].PLinkSpeed = SK_LSPEED_AUTO;
|
|
pAC->GIni.GP[i].PMSCap =
|
|
SK_MS_CAP_AUTO | SK_MS_CAP_MASTER | SK_MS_CAP_SLAVE;
|
|
}
|
|
else {
|
|
Byte = SK_PHY_MARV_FIBER;
|
|
}
|
|
}
|
|
|
|
pAC->GIni.GP[i].PhyType = Byte;
|
|
|
|
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
|
|
("PHY type: %d PHY addr: %04x\n", Byte,
|
|
pAC->GIni.GP[i].PhyAddr));
|
|
}
|
|
|
|
/* get Mac Type & set function pointers dependent on */
|
|
if (pAC->GIni.GIGenesis) {
|
|
pAC->GIni.GIMacType = SK_MAC_XMAC;
|
|
|
|
pAC->GIni.GIFunc.pFnMacUpdateStats = SkXmUpdateStats;
|
|
pAC->GIni.GIFunc.pFnMacStatistic = SkXmMacStatistic;
|
|
pAC->GIni.GIFunc.pFnMacResetCounter = SkXmResetCounter;
|
|
pAC->GIni.GIFunc.pFnMacOverflow = SkXmOverflowStatus;
|
|
}
|
|
else {
|
|
pAC->GIni.GIMacType = SK_MAC_GMAC;
|
|
|
|
pAC->GIni.GIFunc.pFnMacUpdateStats = SkGmUpdateStats;
|
|
pAC->GIni.GIFunc.pFnMacStatistic = SkGmMacStatistic;
|
|
pAC->GIni.GIFunc.pFnMacResetCounter = SkGmResetCounter;
|
|
pAC->GIni.GIFunc.pFnMacOverflow = SkGmOverflowStatus;
|
|
|
|
#ifdef SPECIAL_HANDLING
|
|
if (pAC->GIni.GIChipId == CHIP_ID_YUKON) {
|
|
/* check HW self test result */
|
|
SK_IN8(IoC, B2_E_3, &Byte);
|
|
if ((Byte & B2_E3_RES_MASK) != 0) {
|
|
RetVal = 6;
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
return(RetVal);
|
|
} /* SkGeInit1 */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInit2() - Level 2 Initialization
|
|
*
|
|
* Description:
|
|
* - start the Blink Source Counter
|
|
* - start the Descriptor Poll Timer
|
|
* - configure the MAC-Arbiter
|
|
* - configure the Packet-Arbiter
|
|
* - enable the Tx Arbiters
|
|
* - enable the RAM Interface Arbiter
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
static void SkGeInit2(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC) /* IO context */
|
|
{
|
|
SK_U32 DWord;
|
|
int i;
|
|
|
|
/* start the Descriptor Poll Timer */
|
|
if (pAC->GIni.GIPollTimerVal != 0) {
|
|
if (pAC->GIni.GIPollTimerVal > SK_DPOLL_MAX) {
|
|
pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX;
|
|
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E017, SKERR_HWI_E017MSG);
|
|
}
|
|
SK_OUT32(IoC, B28_DPT_INI, pAC->GIni.GIPollTimerVal);
|
|
SK_OUT8(IoC, B28_DPT_CTRL, DPT_START);
|
|
}
|
|
|
|
if (pAC->GIni.GIGenesis) {
|
|
/* start the Blink Source Counter */
|
|
DWord = SK_BLK_DUR * (SK_U32)pAC->GIni.GIHstClkFact / 100;
|
|
|
|
SK_OUT32(IoC, B2_BSC_INI, DWord);
|
|
SK_OUT8(IoC, B2_BSC_CTRL, BSC_START);
|
|
|
|
/*
|
|
* Configure the MAC Arbiter and the Packet Arbiter.
|
|
* They will be started once and never be stopped.
|
|
*/
|
|
SkGeInitMacArb(pAC, IoC);
|
|
|
|
SkGeInitPktArb(pAC, IoC);
|
|
}
|
|
else {
|
|
/* start Time Stamp Timer */
|
|
SK_OUT8(IoC, GMAC_TI_ST_CTRL, (SK_U8)GMT_ST_START);
|
|
}
|
|
|
|
/* enable the Tx Arbiters */
|
|
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
|
|
SK_OUT8(IoC, MR_ADDR(i, TXA_CTRL), TXA_ENA_ARB);
|
|
}
|
|
|
|
/* enable the RAM Interface Arbiter */
|
|
SkGeInitRamIface(pAC, IoC);
|
|
|
|
} /* SkGeInit2 */
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInit() - Initialize the GE Adapter with the specified level.
|
|
*
|
|
* Description:
|
|
* Level 0: Initialize the Module structures.
|
|
* Level 1: Generic Hardware Initialization. The IOP/MemBase pointer has
|
|
* to be set before calling this level.
|
|
*
|
|
* o Do a software reset.
|
|
* o Clear all reset bits.
|
|
* o Verify that the detected hardware is present.
|
|
* Return an error if not.
|
|
* o Get the hardware configuration
|
|
* + Set GIMacsFound with the number of MACs.
|
|
* + Store the RAM size in GIRamSize.
|
|
* + Save the PCI Revision ID in GIPciHwRev.
|
|
* o return an error
|
|
* if Number of MACs > SK_MAX_MACS
|
|
*
|
|
* After returning from Level 0 the adapter
|
|
* may be accessed with IO operations.
|
|
*
|
|
* Level 2: start the Blink Source Counter
|
|
*
|
|
* Returns:
|
|
* 0: success
|
|
* 1: Number of MACs exceeds SK_MAX_MACS (after level 1)
|
|
* 2: Adapter not present or not accessible
|
|
* 3: Illegal initialization level
|
|
* 4: Initialization Level 1 Call missing
|
|
* 5: Unexpected PHY type detected
|
|
* 6: HW self test failed
|
|
*/
|
|
int SkGeInit(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Level) /* initialization level */
|
|
{
|
|
int RetVal; /* return value */
|
|
SK_U32 DWord;
|
|
|
|
RetVal = 0;
|
|
SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT,
|
|
("SkGeInit(Level %d)\n", Level));
|
|
|
|
switch (Level) {
|
|
case SK_INIT_DATA:
|
|
/* Initialization Level 0 */
|
|
SkGeInit0(pAC, IoC);
|
|
pAC->GIni.GILevel = SK_INIT_DATA;
|
|
break;
|
|
|
|
case SK_INIT_IO:
|
|
/* Initialization Level 1 */
|
|
RetVal = SkGeInit1(pAC, IoC);
|
|
if (RetVal != 0) {
|
|
break;
|
|
}
|
|
|
|
/* check if the adapter seems to be accessible */
|
|
SK_OUT32(IoC, B2_IRQM_INI, 0x11335577L);
|
|
SK_IN32(IoC, B2_IRQM_INI, &DWord);
|
|
SK_OUT32(IoC, B2_IRQM_INI, 0L);
|
|
|
|
if (DWord != 0x11335577L) {
|
|
RetVal = 2;
|
|
break;
|
|
}
|
|
|
|
/* check if the number of GIMacsFound matches SK_MAX_MACS */
|
|
if (pAC->GIni.GIMacsFound > SK_MAX_MACS) {
|
|
RetVal = 1;
|
|
break;
|
|
}
|
|
|
|
/* Level 1 successfully passed */
|
|
pAC->GIni.GILevel = SK_INIT_IO;
|
|
break;
|
|
|
|
case SK_INIT_RUN:
|
|
/* Initialization Level 2 */
|
|
if (pAC->GIni.GILevel != SK_INIT_IO) {
|
|
#ifndef SK_DIAG
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E002, SKERR_HWI_E002MSG);
|
|
#endif /* !SK_DIAG */
|
|
RetVal = 4;
|
|
break;
|
|
}
|
|
SkGeInit2(pAC, IoC);
|
|
|
|
/* Level 2 successfully passed */
|
|
pAC->GIni.GILevel = SK_INIT_RUN;
|
|
break;
|
|
|
|
default:
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG);
|
|
RetVal = 3;
|
|
break;
|
|
}
|
|
|
|
return(RetVal);
|
|
} /* SkGeInit */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeDeInit() - Deinitialize the adapter
|
|
*
|
|
* Description:
|
|
* All ports of the adapter will be stopped if not already done.
|
|
* Do a software reset and switch off all LEDs.
|
|
*
|
|
* Returns:
|
|
* nothing
|
|
*/
|
|
void SkGeDeInit(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC) /* IO context */
|
|
{
|
|
int i;
|
|
SK_U16 Word;
|
|
|
|
#ifndef VCPU
|
|
/* ensure I2C is ready */
|
|
SkI2cWaitIrq(pAC, IoC);
|
|
#endif
|
|
|
|
/* stop all current transfer activity */
|
|
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
|
|
if (pAC->GIni.GP[i].PState != SK_PRT_STOP &&
|
|
pAC->GIni.GP[i].PState != SK_PRT_RESET) {
|
|
|
|
SkGeStopPort(pAC, IoC, i, SK_STOP_ALL, SK_HARD_RST);
|
|
}
|
|
}
|
|
|
|
/* Reset all bits in the PCI STATUS register */
|
|
/*
|
|
* Note: PCI Cfg cycles cannot be used, because they are not
|
|
* available on some platforms after 'boot time'.
|
|
*/
|
|
SK_IN16(IoC, PCI_C(PCI_STATUS), &Word);
|
|
|
|
SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON);
|
|
SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS);
|
|
SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
|
|
|
|
/* do the reset, all LEDs are switched off now */
|
|
SK_OUT8(IoC, B0_CTST, CS_RST_SET);
|
|
} /* SkGeDeInit */
|
|
|
|
|
|
/******************************************************************************
|
|
*
|
|
* SkGeInitPort() Initialize the specified port.
|
|
*
|
|
* Description:
|
|
* PRxQSize, PXSQSize, and PXAQSize has to be
|
|
* configured for the specified port before calling this function.
|
|
* The descriptor rings has to be initialized too.
|
|
*
|
|
* o (Re)configure queues of the specified port.
|
|
* o configure the MAC of the specified port.
|
|
* o put ASIC and MAC(s) in operational mode.
|
|
* o initialize Rx/Tx and Sync LED
|
|
* o initialize RAM Buffers and MAC FIFOs
|
|
*
|
|
* The port is ready to connect when returning.
|
|
*
|
|
* Note:
|
|
* The MAC's Rx and Tx state machine is still disabled when returning.
|
|
*
|
|
* Returns:
|
|
* 0: success
|
|
* 1: Queue size initialization error. The configured values
|
|
* for PRxQSize, PXSQSize, or PXAQSize are invalid for one
|
|
* or more queues. The specified port was NOT initialized.
|
|
* An error log entry was generated.
|
|
* 2: The port has to be stopped before it can be initialized again.
|
|
*/
|
|
int SkGeInitPort(
|
|
SK_AC *pAC, /* adapter context */
|
|
SK_IOC IoC, /* IO context */
|
|
int Port) /* Port to configure */
|
|
{
|
|
SK_GEPORT *pPrt;
|
|
|
|
pPrt = &pAC->GIni.GP[Port];
|
|
|
|
if (SkGeCheckQSize(pAC, Port) != 0) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG);
|
|
return(1);
|
|
}
|
|
|
|
if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) {
|
|
SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG);
|
|
return(2);
|
|
}
|
|
|
|
/* configuration ok, initialize the Port now */
|
|
|
|
if (pAC->GIni.GIGenesis) {
|
|
/* initialize Rx, Tx and Link LED */
|
|
/*
|
|
* If 1000BT Phy needs LED initialization than swap
|
|
* LED and XMAC initialization order
|
|
*/
|
|
SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA);
|
|
SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA);
|
|
/* The Link LED is initialized by RLMT or Diagnostics itself */
|
|
|
|
SkXmInitMac(pAC, IoC, Port);
|
|
}
|
|
else {
|
|
|
|
SkGmInitMac(pAC, IoC, Port);
|
|
}
|
|
|
|
/* do NOT initialize the Link Sync Counter */
|
|
|
|
SkGeInitMacFifo(pAC, IoC, Port);
|
|
|
|
SkGeInitRamBufs(pAC, IoC, Port);
|
|
|
|
if (pPrt->PXSQSize != 0) {
|
|
/* enable Force Sync bit if synchronous queue available */
|
|
SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC);
|
|
}
|
|
|
|
SkGeInitBmu(pAC, IoC, Port);
|
|
|
|
/* mark port as initialized */
|
|
pPrt->PState = SK_PRT_INIT;
|
|
|
|
return(0);
|
|
} /* SkGeInitPort */
|
|
|
|
#endif /* CONFIG_SK98 */
|