mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-29 14:23:44 +09:00
76db1681da
Save the environment at the end of the U-Boot partition, the GPT partition named "ssbl" in SD card or eMMC and avoid requirements on the "bootfs" file system generated via specific raw tools (like wic and genimage). With the previous configuration of the U-Boot environment saved in ext4 file, U-Boot need to create/modify the file uenv.txt in the ext4 file system; so this EXT4 file system need to be generated without some functionality, like metadata_csum and dir_index, because they are not supported by U-Boot. Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
222 lines
3.2 KiB
Plaintext
222 lines
3.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright : STMicroelectronics 2018
|
|
*/
|
|
|
|
#include <dt-bindings/clock/stm32mp1-clksrc.h>
|
|
#include "stm32mp15-u-boot.dtsi"
|
|
#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
i2c3 = &i2c4;
|
|
mmc0 = &sdmmc1;
|
|
mmc1 = &sdmmc2;
|
|
};
|
|
|
|
config {
|
|
u-boot,boot-led = "heartbeat";
|
|
u-boot,error-led = "error";
|
|
u-boot,mmc-env-partition = "ssbl";
|
|
st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
|
|
st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
firmware {
|
|
optee {
|
|
compatible = "linaro,optee-tz";
|
|
method = "smc";
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
optee@fe000000 {
|
|
reg = <0xfe000000 0x02000000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
led {
|
|
red {
|
|
label = "error";
|
|
gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&clk_hse {
|
|
st,digbypass;
|
|
};
|
|
|
|
&i2c4 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&i2c4_pins_a {
|
|
u-boot,dm-pre-reloc;
|
|
pins {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
&pmic {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&rcc {
|
|
st,clksrc = <
|
|
CLK_MPU_PLL1P
|
|
CLK_AXI_PLL2P
|
|
CLK_MCU_PLL3P
|
|
CLK_PLL12_HSE
|
|
CLK_PLL3_HSE
|
|
CLK_PLL4_HSE
|
|
CLK_RTC_LSE
|
|
CLK_MCO1_DISABLED
|
|
CLK_MCO2_DISABLED
|
|
>;
|
|
|
|
st,clkdiv = <
|
|
1 /*MPU*/
|
|
0 /*AXI*/
|
|
0 /*MCU*/
|
|
1 /*APB1*/
|
|
1 /*APB2*/
|
|
1 /*APB3*/
|
|
1 /*APB4*/
|
|
2 /*APB5*/
|
|
23 /*RTC*/
|
|
0 /*MCO1*/
|
|
0 /*MCO2*/
|
|
>;
|
|
|
|
st,pkcs = <
|
|
CLK_CKPER_HSE
|
|
CLK_FMC_ACLK
|
|
CLK_QSPI_ACLK
|
|
CLK_ETH_DISABLED
|
|
CLK_SDMMC12_PLL4P
|
|
CLK_DSI_DSIPLL
|
|
CLK_STGEN_HSE
|
|
CLK_USBPHY_HSE
|
|
CLK_SPI2S1_PLL3Q
|
|
CLK_SPI2S23_PLL3Q
|
|
CLK_SPI45_HSI
|
|
CLK_SPI6_HSI
|
|
CLK_I2C46_HSI
|
|
CLK_SDMMC3_PLL4P
|
|
CLK_USBO_USBPHY
|
|
CLK_ADC_CKPER
|
|
CLK_CEC_LSE
|
|
CLK_I2C12_HSI
|
|
CLK_I2C35_HSI
|
|
CLK_UART1_HSI
|
|
CLK_UART24_HSI
|
|
CLK_UART35_HSI
|
|
CLK_UART6_HSI
|
|
CLK_UART78_HSI
|
|
CLK_SPDIF_PLL4P
|
|
CLK_FDCAN_PLL4R
|
|
CLK_SAI1_PLL3Q
|
|
CLK_SAI2_PLL3Q
|
|
CLK_SAI3_PLL3Q
|
|
CLK_SAI4_PLL3Q
|
|
CLK_RNG1_LSI
|
|
CLK_RNG2_LSI
|
|
CLK_LPTIM1_PCLK1
|
|
CLK_LPTIM23_PCLK3
|
|
CLK_LPTIM45_LSE
|
|
>;
|
|
|
|
/* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
|
|
pll2: st,pll@1 {
|
|
compatible = "st,stm32mp1-pll";
|
|
reg = <1>;
|
|
cfg = < 2 65 1 0 0 PQR(1,1,1) >;
|
|
frac = < 0x1400 >;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
/* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
|
|
pll3: st,pll@2 {
|
|
compatible = "st,stm32mp1-pll";
|
|
reg = <2>;
|
|
cfg = < 1 33 1 16 36 PQR(1,1,1) >;
|
|
frac = < 0x1a04 >;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
/* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
|
|
pll4: st,pll@3 {
|
|
compatible = "st,stm32mp1-pll";
|
|
reg = <3>;
|
|
cfg = < 3 98 5 7 7 PQR(1,1,1) >;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
&sdmmc1 {
|
|
u-boot,dm-spl;
|
|
broken-cd;
|
|
/delete-property/ cd-gpios;
|
|
};
|
|
|
|
&sdmmc1_b4_pins_a {
|
|
u-boot,dm-spl;
|
|
pins1 {
|
|
u-boot,dm-spl;
|
|
};
|
|
pins2 {
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&sdmmc1_dir_pins_a {
|
|
u-boot,dm-spl;
|
|
pins1 {
|
|
u-boot,dm-spl;
|
|
};
|
|
pins2 {
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&sdmmc2 {
|
|
u-boot,dm-spl;
|
|
};
|
|
|
|
&sdmmc2_b4_pins_a {
|
|
u-boot,dm-spl;
|
|
pins1 {
|
|
u-boot,dm-spl;
|
|
};
|
|
pins2 {
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&sdmmc2_d47_pins_a {
|
|
u-boot,dm-spl;
|
|
pins {
|
|
u-boot,dm-spl;
|
|
};
|
|
};
|
|
|
|
&uart4 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&uart4_pins_a {
|
|
u-boot,dm-pre-reloc;
|
|
pins1 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
pins2 {
|
|
u-boot,dm-pre-reloc;
|
|
/* pull-up on rx to avoid floating level */
|
|
bias-pull-up;
|
|
};
|
|
};
|