Matt Pelland 0a85f024c5 net: mvneta: support setting hardware address ... mvneta already supports setting the MAC address but this was only done internally when some other part of U-Boot tries to actually use the interface. This commit exposes this functionality to the ethernet core code so that the MAC addresses of all interfaces are configured correctly even if they are not used before loading Linux. Signed-off-by: Matt Pelland <mpelland@starry.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>		2018-04-13 15:47:31 -05:00
..
adc	treewide: replace with error() with pr_err()	2017-10-04 11:59:44 -04:00
ata	Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig	2018-02-08 19:09:03 -05:00
bios_emulator	printk: collect printk stuff into <linux/printk.h> with loglevel support	2017-10-04 10:31:17 -04:00
block	SystemACE: Remove	2018-02-13 23:24:22 -05:00
bootcount	Migrate CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC	2018-04-06 17:04:33 -04:00
clk	clk: add sandbox test for bulk API	2018-04-10 15:18:56 -04:00
core	core: ofnode: Fix translation for #size-cells == 0	2018-04-01 22:19:10 +08:00
cpu	dm: cpu: bmips: add BCM6362 support	2018-03-21 23:23:13 +01:00
crypto	libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>	2018-03-05 10:16:28 -05:00
ddr	Revert "drivers/ddr/fsl: Dual-license DDR driver"	2018-02-14 21:34:05 -05:00
demo	sandbox: Add 64-bit sandbox	2018-02-18 15:53:48 -07:00
dfu	dfu: tftp: Fix arm64 build warnings	2018-02-21 20:28:15 +01:00
dma	Convert CONFIG_APBH_DMA et al to Kconfig	2018-02-08 12:48:11 -05:00
firmware	libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>	2018-03-05 10:16:28 -05:00
fpga	fpga: zynq: Add delay after PCFG_PROG_B change	2018-04-09 12:14:50 +02:00
gpio	gpio: uclass: Fix debug string	2018-04-06 20:45:44 -04:00
i2c	i2c: fsl: Add option to get clock from DT	2018-04-11 11:34:55 +02:00
input	input: Drop PS/2 keyboard support	2018-04-06 17:04:33 -04:00
led	dm: core: Update device_bind_driver_to_node() to use ofnode	2017-06-01 07:03:08 -06:00
mailbox	dm: mailbox: Update uclass to support livetree	2017-06-01 07:03:15 -06:00
memory	memory: Move TI_AEMIF config to KCONFIG	2016-04-18 17:11:43 -04:00
misc	libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>	2018-03-05 10:16:28 -05:00
mmc	mmc: renesas-sdhi: Wait after reconfiguring pins	2018-04-11 23:12:00 +02:00
mtd	mtd: rpc: Add Renesas RPC Hyperflash driver	2018-04-11 23:12:00 +02:00
net	net: mvneta: support setting hardware address	2018-04-13 15:47:31 -05:00
nvme	Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig	2018-02-08 19:09:03 -05:00
pch	dm: Use dm_scan_fdt_dev() directly where possible	2016-07-27 14:15:54 -06:00
pci	Merge git://git.denx.de/u-boot-marvell	2018-03-30 18:18:22 -04:00
pcmcia	Kconfig; Drop CONFIG_IDE_TI_CARDBUS and associated driver	2017-08-11 15:41:51 -04:00
phy	phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers	2018-04-11 17:22:07 +02:00
pinctrl	Merge git://git.denx.de/u-boot-dm	2018-04-01 20:36:39 -04:00
power	regulator: pbias: don't evaluate variable before assignment	2018-04-06 20:45:28 -04:00
pwm	rockchip: pwm: convert to use live dt	2018-03-13 18:12:35 +01:00
qe	libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>	2018-03-05 10:16:28 -05:00
ram	driver: ram: rockchip: rk3399: missing counter increment	2018-03-28 23:30:31 +02:00
remoteproc	dm: core: Replace of_offset with accessor	2017-02-08 06:12:14 -07:00
reset	reset: add sandbox test for bulk API	2018-04-10 11:52:16 -04:00
rtc	rtc: rx8025: remove redundant code in rtc_reset	2018-04-06 20:45:44 -04:00
scsi	Move most CONFIG_HAVE_BLOCK_DEVICE to Kconfig	2018-02-08 19:09:03 -05:00
serial	serial: Fix Makefile during SPL and TPL build	2018-04-11 13:22:05 -04:00
soc	Use correct spelling of "U-Boot"	2016-02-06 12:00:59 +01:00
sound	libfdt: move headers to <linux/libfdt.h> and <linux/libfdt_env.h>	2018-03-05 10:16:28 -05:00
spi	spi: sh_qspi: Make use of the 32byte FIFO	2018-04-11 23:19:51 +02:00
spmi	spmi: msm: display the PMIC Arb version (debug)	2018-01-15 11:35:37 -05:00
sysreset	sysreset: syscon: convert to use live dt	2018-04-10 11:52:16 -04:00
thermal	thermal: ti-bandgap: Add support for temperature sensor	2017-11-21 08:03:38 -05:00
timer	timer: stm32: Add timer support for STM32 SoCs family	2018-03-13 21:45:37 -04:00
tpm	treewide: Fix gdsys mail addresses	2018-03-09 09:23:10 -05:00
usb	usb: host: dwc3: Add support for multiple PHYs	2018-04-11 17:22:07 +02:00
video	Merge git://git.denx.de/u-boot-sunxi	2018-04-04 14:10:39 -04:00
watchdog	watchdog: Fix Kconfig alignment for WDT_SANDBOX	2018-04-06 20:45:44 -04:00
Kconfig	bootcount: add support for bootcounter on EXT filesystem	2017-11-20 09:58:31 +01:00
Makefile	spl: add SPL_RESET_SUPPORT	2018-03-19 16:14:20 -04:00