mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
09f3ca3dd5
We have finished Generic Board conversion for ARM and PowerPC, i.e. all the boards have been converted except OpenRISC, SuperH, SPARC, which have not supported Generic Board framework yet. Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro defines in include/configs/*.h. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
169 lines
4.8 KiB
C
169 lines
4.8 KiB
C
/*
|
|
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _CONFIG_DB_MV7846MP_GP_H
|
|
#define _CONFIG_DB_MV7846MP_GP_H
|
|
|
|
/*
|
|
* High Level Configuration Options (easy to change)
|
|
*/
|
|
#define CONFIG_ARMADA_XP /* SOC Family Name */
|
|
#define CONFIG_DB_784MP_GP /* Board target name for DDR training */
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
|
#endif
|
|
#define CONFIG_DISPLAY_BOARDINFO_LATE
|
|
|
|
/*
|
|
* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
|
|
* for DDR ECC byte filling in the SPL before loading the main
|
|
* U-Boot into it.
|
|
*/
|
|
#define CONFIG_SYS_TEXT_BASE 0x00800000
|
|
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
|
|
|
|
/*
|
|
* Commands configuration
|
|
*/
|
|
#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_ENV
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_TFTPPUT
|
|
#define CONFIG_CMD_TIME
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MVTWSI
|
|
#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
|
|
#define CONFIG_SYS_I2C_SLAVE 0x0
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* USB/EHCI configuration */
|
|
#define CONFIG_EHCI_IS_TDI
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
|
|
|
|
/* SPI NOR flash default params, used by sf commands */
|
|
#define CONFIG_SF_DEFAULT_SPEED 1000000
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
|
|
#define CONFIG_SPI_FLASH_STMICRO
|
|
|
|
/* Environment in SPI NOR flash */
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
|
|
#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
|
|
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
|
|
|
|
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
|
|
#define CONFIG_PHY_ADDR { 0x10, 0x11, 0x12, 0x13 }
|
|
#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_QSGMII
|
|
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
|
|
#define CONFIG_RESET_PHY_R
|
|
|
|
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
|
|
|
/* SATA support */
|
|
#ifdef CONFIG_CMD_IDE
|
|
#define __io
|
|
#define CONFIG_IDE_PREINIT
|
|
#define CONFIG_MVSATA_IDE
|
|
|
|
/* Needs byte-swapping for ATA data register */
|
|
#define CONFIG_IDE_SWAP_IO
|
|
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0x0100 /* Offset for register access */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0100 /* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
|
|
|
|
/* Each 8-bit ATA register is aligned to a 4-bytes address */
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
|
|
/* CONFIG_CMD_IDE requires some #defines for ATA registers */
|
|
#define CONFIG_SYS_IDE_MAXBUS 2
|
|
#define CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_IDE_MAXBUS
|
|
|
|
/* ATA registers base is at SATA controller base */
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MVEBU_AXP_SATA_BASE
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x2000
|
|
#define CONFIG_SYS_ATA_IDE1_OFFSET 0x4000
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
#endif /* CONFIG_CMD_IDE */
|
|
|
|
/* PCIe support */
|
|
#define CONFIG_PCI
|
|
#define CONFIG_PCI_MVEBU
|
|
#define CONFIG_PCI_PNP
|
|
#define CONFIG_PCI_SCAN_SHOW
|
|
#define CONFIG_E1000 /* enable Intel E1000 support for testing */
|
|
|
|
/* NAND */
|
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
/*
|
|
* mv-common.h should be defined after CMD configs since it used them
|
|
* to enable certain macros
|
|
*/
|
|
#include "mv-common.h"
|
|
|
|
/*
|
|
* Memory layout while starting into the bin_hdr via the
|
|
* BootROM:
|
|
*
|
|
* 0x4000.4000 - 0x4003.4000 headers space (192KiB)
|
|
* 0x4000.4030 bin_hdr start address
|
|
* 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB)
|
|
* 0x4007.fffc BootROM stack top
|
|
*
|
|
* The address space between 0x4007.fffc and 0x400f.fff is not locked in
|
|
* L2 cache thus cannot be used.
|
|
*/
|
|
|
|
/* SPL */
|
|
/* Defines for SPL */
|
|
#define CONFIG_SPL_FRAMEWORK
|
|
#define CONFIG_SPL_TEXT_BASE 0x40004030
|
|
#define CONFIG_SPL_MAX_SIZE ((128 << 10) - 0x4030)
|
|
|
|
#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + (128 << 10))
|
|
#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
|
|
|
|
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
|
|
CONFIG_SPL_BSS_MAX_SIZE)
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE (16 << 10)
|
|
|
|
#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
|
|
#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
|
|
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
#define CONFIG_SPL_SERIAL_SUPPORT
|
|
#define CONFIG_SPL_I2C_SUPPORT
|
|
|
|
/* SPL related SPI defines */
|
|
#define CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
#define CONFIG_SPL_SPI_LOAD
|
|
#define CONFIG_SPL_SPI_BUS 0
|
|
#define CONFIG_SPL_SPI_CS 0
|
|
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
|
|
#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
|
|
|
|
/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
|
|
#define CONFIG_SYS_MVEBU_DDR_AXP
|
|
#define CONFIG_SPD_EEPROM 0x4e
|
|
|
|
#endif /* _CONFIG_DB_MV7846MP_GP_H */
|