mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-28 21:09:00 +09:00
![Samuel Holland](/assets/img/avatar_default.png)
Import updated device trees from Linux tag v5.9. This picks up new hardware (PinePhone, PineTab); and it drops the U-Boot specific DTSI files for the Pinebook and the Teres-I, since the ANX6345 bridge is now supported upstream. A couple of headers needed updates for recently-added hardware support. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
461 lines
8.7 KiB
Plaintext
461 lines
8.7 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.xyz>
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "sun50i-a64.dtsi"
|
|
#include "sun50i-a64-cpu-opp.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
model = "PineTab";
|
|
compatible = "pine64,pinetab", "allwinner,sun50i-a64";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
ethernet0 = &rtl8723cs;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
|
|
brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
|
|
default-brightness-level = <15>;
|
|
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
|
|
power-supply = <&vdd_bl>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
i2c-csi {
|
|
compatible = "i2c-gpio";
|
|
sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
|
|
scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */
|
|
i2c-gpio,delay-us = <5>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Rear camera */
|
|
ov5640: camera@3c {
|
|
compatible = "ovti,ov5640";
|
|
reg = <0x3c>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&csi_mclk_pin>;
|
|
clocks = <&ccu CLK_CSI_MCLK>;
|
|
clock-names = "xclk";
|
|
|
|
AVDD-supply = <®_dldo3>;
|
|
DOVDD-supply = <®_aldo1>;
|
|
DVDD-supply = <®_eldo3>;
|
|
reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */
|
|
powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
|
|
|
|
port {
|
|
ov5640_ep: endpoint {
|
|
remote-endpoint = <&csi_ep>;
|
|
bus-width = <8>;
|
|
hsync-active = <1>; /* Active high */
|
|
vsync-active = <0>; /* Active low */
|
|
data-active = <1>; /* Active high */
|
|
pclk-sample = <1>; /* Rising */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
speaker_amp: audio-amplifier {
|
|
compatible = "simple-audio-amplifier";
|
|
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
|
|
sound-name-prefix = "Speaker Amp";
|
|
};
|
|
|
|
vdd_bl: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "bl-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
|
|
enable-active-high;
|
|
};
|
|
|
|
wifi_pwrseq: wifi_pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
|
post-power-on-delay-ms = <200>;
|
|
};
|
|
};
|
|
|
|
&codec {
|
|
status = "okay";
|
|
};
|
|
|
|
&codec_analog {
|
|
cpvdd-supply = <®_eldo1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <®_dcdc2>;
|
|
};
|
|
|
|
&csi {
|
|
status = "okay";
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
csi_ep: endpoint {
|
|
remote-endpoint = <&ov5640_ep>;
|
|
bus-width = <8>;
|
|
hsync-active = <1>; /* Active high */
|
|
vsync-active = <0>; /* Active low */
|
|
data-active = <1>; /* Active high */
|
|
pclk-sample = <1>; /* Rising */
|
|
};
|
|
};
|
|
};
|
|
|
|
&dai {
|
|
status = "okay";
|
|
};
|
|
|
|
&de {
|
|
status = "okay";
|
|
};
|
|
|
|
&dphy {
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi {
|
|
vcc-dsi-supply = <®_dldo1>;
|
|
status = "okay";
|
|
|
|
panel@0 {
|
|
compatible = "feixin,k101-im2ba02";
|
|
reg = <0>;
|
|
avdd-supply = <®_dc1sw>;
|
|
dvdd-supply = <®_dc1sw>;
|
|
cvdd-supply = <®_ldo_io1>;
|
|
reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
|
|
backlight = <&backlight>;
|
|
};
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
touchscreen@5d {
|
|
compatible = "goodix,gt9271";
|
|
reg = <0x5d>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
|
|
irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
|
|
reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
|
|
AVDD28-supply = <®_ldo_io1>;
|
|
};
|
|
};
|
|
|
|
&i2c0_pins {
|
|
bias-pull-up;
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
/* TODO: add Bochs BMA223 accelerometer here */
|
|
};
|
|
|
|
&lradc {
|
|
vref-supply = <®_aldo3>;
|
|
status = "okay";
|
|
|
|
button-200 {
|
|
label = "Volume Up";
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
channel = <0>;
|
|
voltage = <200000>;
|
|
};
|
|
|
|
button-400 {
|
|
label = "Volume Down";
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
channel = <0>;
|
|
voltage = <400000>;
|
|
};
|
|
};
|
|
|
|
&mixer1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
vmmc-supply = <®_dldo4>;
|
|
vqmmc-supply = <®_eldo1>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
status = "okay";
|
|
|
|
rtl8723cs: wifi@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&mmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
vmmc-supply = <®_dcdc1>;
|
|
vqmmc-supply = <®_dcdc1>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
cap-mmc-hw-reset;
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm {
|
|
status = "okay";
|
|
};
|
|
|
|
&r_rsb {
|
|
status = "okay";
|
|
|
|
axp803: pmic@3a3 {
|
|
compatible = "x-powers,axp803";
|
|
reg = <0x3a3>;
|
|
interrupt-parent = <&r_intc>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
x-powers,drive-vbus-en;
|
|
};
|
|
};
|
|
|
|
#include "axp803.dtsi"
|
|
|
|
&ac_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&battery_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
®_aldo1 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "dovdd-csi";
|
|
};
|
|
|
|
®_aldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pl";
|
|
};
|
|
|
|
®_aldo3 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-pll-avcc";
|
|
};
|
|
|
|
®_dc1sw {
|
|
regulator-name = "vcc-lcd";
|
|
};
|
|
|
|
®_dcdc1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-3v3";
|
|
};
|
|
|
|
®_dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-name = "vdd-cpux";
|
|
};
|
|
|
|
/* DCDC3 is polyphased with DCDC2 */
|
|
|
|
®_dcdc5 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-dram";
|
|
};
|
|
|
|
®_dcdc6 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-sys";
|
|
};
|
|
|
|
®_dldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-hdmi-dsi-sensor";
|
|
};
|
|
|
|
®_dldo3 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-name = "avdd-csi";
|
|
};
|
|
|
|
®_dldo4 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-wifi";
|
|
};
|
|
|
|
®_drivevbus {
|
|
regulator-name = "usb0-vbus";
|
|
status = "okay";
|
|
};
|
|
|
|
®_eldo1 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "cpvdd";
|
|
};
|
|
|
|
®_eldo2 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "vcca-1v8";
|
|
};
|
|
|
|
®_eldo3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-name = "dvdd-1v8-csi";
|
|
};
|
|
|
|
®_fldo1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-name = "vcc-1v2-hsic";
|
|
};
|
|
|
|
®_fldo2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-name = "vdd-cpus";
|
|
};
|
|
|
|
®_ldo_io0 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc-usb";
|
|
status = "okay";
|
|
};
|
|
|
|
®_ldo_io1 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <3500000>;
|
|
regulator-name = "vcc-touchscreen";
|
|
status = "okay";
|
|
};
|
|
|
|
®_rtc_ldo {
|
|
regulator-name = "vcc-rtc";
|
|
};
|
|
|
|
&sound {
|
|
status = "okay";
|
|
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
|
|
simple-audio-card,widgets = "Microphone", "Internal Microphone Left",
|
|
"Microphone", "Internal Microphone Right",
|
|
"Headphone", "Headphone Jack",
|
|
"Speaker", "Internal Speaker";
|
|
simple-audio-card,routing =
|
|
"Left DAC", "AIF1 Slot 0 Left",
|
|
"Right DAC", "AIF1 Slot 0 Right",
|
|
"Speaker Amp INL", "LINEOUT",
|
|
"Speaker Amp INR", "LINEOUT",
|
|
"Internal Speaker", "Speaker Amp OUTL",
|
|
"Internal Speaker", "Speaker Amp OUTR",
|
|
"Headphone Jack", "HP",
|
|
"AIF1 Slot 0 Left ADC", "Left ADC",
|
|
"AIF1 Slot 0 Right ADC", "Right ADC",
|
|
"Internal Microphone Left", "MBIAS",
|
|
"MIC1", "Internal Microphone Left",
|
|
"Internal Microphone Right", "HBIAS",
|
|
"MIC2", "Internal Microphone Right";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pb_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_power_supply {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
|
|
usb0_vbus_power-supply = <&usb_power_supply>;
|
|
usb0_vbus-supply = <®_drivevbus>;
|
|
usb1_vbus-supply = <®_ldo_io0>;
|
|
status = "okay";
|
|
};
|