mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-28 21:09:00 +09:00
![Lokesh Vutla](/assets/img/avatar_default.png)
Sync all J7200 related v5.11-rc6 Linux kernel dts into U-Boot. MCU R5F nodes are not yet added in Linux kernel yet but were added in U-Boot. In order to avoid regressions, r5f nodes are kept intact. These will be added in kernel in future. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
173 lines
5.1 KiB
Plaintext
173 lines
5.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree Source for J7200 SoC Family
|
|
*
|
|
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/k3.h>
|
|
#include <dt-bindings/soc/ti,sci_pm_domain.h>
|
|
|
|
/ {
|
|
model = "Texas Instruments K3 J7200 SoC";
|
|
compatible = "ti,j7200";
|
|
interrupt-parent = <&gic500>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
serial0 = &wkup_uart0;
|
|
serial1 = &mcu_uart0;
|
|
serial2 = &main_uart0;
|
|
serial3 = &main_uart1;
|
|
serial4 = &main_uart2;
|
|
serial5 = &main_uart3;
|
|
serial6 = &main_uart4;
|
|
serial7 = &main_uart5;
|
|
serial8 = &main_uart6;
|
|
serial9 = &main_uart7;
|
|
serial10 = &main_uart8;
|
|
serial11 = &main_uart9;
|
|
};
|
|
|
|
chosen { };
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu-map {
|
|
cluster0: cluster0 {
|
|
core0 {
|
|
cpu = <&cpu0>;
|
|
};
|
|
|
|
core1 {
|
|
cpu = <&cpu1>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a72";
|
|
reg = <0x000>;
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
i-cache-size = <0xc000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x8000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <128>;
|
|
next-level-cache = <&L2_0>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a72";
|
|
reg = <0x001>;
|
|
device_type = "cpu";
|
|
enable-method = "psci";
|
|
i-cache-size = <0xc000>;
|
|
i-cache-line-size = <64>;
|
|
i-cache-sets = <256>;
|
|
d-cache-size = <0x8000>;
|
|
d-cache-line-size = <64>;
|
|
d-cache-sets = <128>;
|
|
next-level-cache = <&L2_0>;
|
|
};
|
|
};
|
|
|
|
L2_0: l2-cache0 {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
cache-size = <0x100000>;
|
|
cache-line-size = <64>;
|
|
cache-sets = <2048>;
|
|
next-level-cache = <&msmc_l3>;
|
|
};
|
|
|
|
msmc_l3: l3-cache0 {
|
|
compatible = "cache";
|
|
cache-level = <3>;
|
|
};
|
|
|
|
firmware {
|
|
optee {
|
|
compatible = "linaro,optee-tz";
|
|
method = "smc";
|
|
};
|
|
|
|
psci: psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
};
|
|
|
|
a72_timer0: timer-cl0-cpu0 {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
|
|
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
|
|
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
|
|
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
|
|
};
|
|
|
|
pmu: pmu {
|
|
compatible = "arm,armv8-pmuv3";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
cbass_main: bus@100000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
|
|
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
|
|
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
|
|
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
|
|
<0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
|
|
<0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
|
|
<0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
|
|
<0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
|
|
|
|
/* MCUSS_WKUP Range */
|
|
<0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
|
|
<0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
|
|
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
|
|
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
|
|
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
|
|
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
|
|
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
|
|
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
|
|
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
|
|
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
|
|
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
|
|
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
|
|
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
|
|
|
|
cbass_mcu_wakeup: bus@28380000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
|
|
<0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
|
|
<0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
|
|
<0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
|
|
<0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
|
|
<0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
|
|
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
|
|
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
|
|
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
|
|
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
|
|
<0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
|
|
<0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
|
|
<0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Now include the peripherals for each bus segments */
|
|
#include "k3-j7200-main.dtsi"
|
|
#include "k3-j7200-mcu-wakeup.dtsi"
|