mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-29 05:18:51 +09:00
![Haijun.Zhang](/assets/img/avatar_default.png)
1. The Data timeout counter value in eSDHC_SYSCTL register is not working as it should be, so add quirks to enable this workaround to fix it to the max value 0xE. 2. Add CONFIG_SYS_FSL_ERRATUM_ESDHC111 to enable its workaround. * Update of patch for change mmc interface by Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
656 lines
17 KiB
C
656 lines
17 KiB
C
/*
|
|
* Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
|
|
* Andy Fleming
|
|
*
|
|
* Based vaguely on the pxa mmc code:
|
|
* (C) Copyright 2003
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <hwconfig.h>
|
|
#include <mmc.h>
|
|
#include <part.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct fsl_esdhc {
|
|
uint dsaddr; /* SDMA system address register */
|
|
uint blkattr; /* Block attributes register */
|
|
uint cmdarg; /* Command argument register */
|
|
uint xfertyp; /* Transfer type register */
|
|
uint cmdrsp0; /* Command response 0 register */
|
|
uint cmdrsp1; /* Command response 1 register */
|
|
uint cmdrsp2; /* Command response 2 register */
|
|
uint cmdrsp3; /* Command response 3 register */
|
|
uint datport; /* Buffer data port register */
|
|
uint prsstat; /* Present state register */
|
|
uint proctl; /* Protocol control register */
|
|
uint sysctl; /* System Control Register */
|
|
uint irqstat; /* Interrupt status register */
|
|
uint irqstaten; /* Interrupt status enable register */
|
|
uint irqsigen; /* Interrupt signal enable register */
|
|
uint autoc12err; /* Auto CMD error status register */
|
|
uint hostcapblt; /* Host controller capabilities register */
|
|
uint wml; /* Watermark level register */
|
|
uint mixctrl; /* For USDHC */
|
|
char reserved1[4]; /* reserved */
|
|
uint fevt; /* Force event register */
|
|
uint admaes; /* ADMA error status register */
|
|
uint adsaddr; /* ADMA system address register */
|
|
char reserved2[160]; /* reserved */
|
|
uint hostver; /* Host controller version register */
|
|
char reserved3[4]; /* reserved */
|
|
uint dmaerraddr; /* DMA error address register */
|
|
char reserved4[4]; /* reserved */
|
|
uint dmaerrattr; /* DMA error attribute register */
|
|
char reserved5[4]; /* reserved */
|
|
uint hostcapblt2; /* Host controller capabilities register 2 */
|
|
char reserved6[8]; /* reserved */
|
|
uint tcr; /* Tuning control register */
|
|
char reserved7[28]; /* reserved */
|
|
uint sddirctl; /* SD direction control register */
|
|
char reserved8[712]; /* reserved */
|
|
uint scr; /* eSDHC control register */
|
|
};
|
|
|
|
/* Return the XFERTYP flags for a given command and data packet */
|
|
static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
uint xfertyp = 0;
|
|
|
|
if (data) {
|
|
xfertyp |= XFERTYP_DPSEL;
|
|
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
xfertyp |= XFERTYP_DMAEN;
|
|
#endif
|
|
if (data->blocks > 1) {
|
|
xfertyp |= XFERTYP_MSBSEL;
|
|
xfertyp |= XFERTYP_BCEN;
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
|
|
xfertyp |= XFERTYP_AC12EN;
|
|
#endif
|
|
}
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
xfertyp |= XFERTYP_DTDSEL;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
xfertyp |= XFERTYP_CCCEN;
|
|
if (cmd->resp_type & MMC_RSP_OPCODE)
|
|
xfertyp |= XFERTYP_CICEN;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
xfertyp |= XFERTYP_RSPTYP_136;
|
|
else if (cmd->resp_type & MMC_RSP_BUSY)
|
|
xfertyp |= XFERTYP_RSPTYP_48_BUSY;
|
|
else if (cmd->resp_type & MMC_RSP_PRESENT)
|
|
xfertyp |= XFERTYP_RSPTYP_48;
|
|
|
|
#if defined(CONFIG_MX53) || defined(CONFIG_T4240QDS)
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
xfertyp |= XFERTYP_CMDTYP_ABORT;
|
|
#endif
|
|
return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
/*
|
|
* PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
|
|
*/
|
|
static void
|
|
esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
uint blocks;
|
|
char *buffer;
|
|
uint databuf;
|
|
uint size;
|
|
uint irqstat;
|
|
uint timeout;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
blocks = data->blocks;
|
|
buffer = data->dest;
|
|
while (blocks) {
|
|
timeout = PIO_TIMEOUT;
|
|
size = data->blocksize;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BREN)
|
|
&& --timeout);
|
|
if (timeout <= 0) {
|
|
printf("\nData Read Failed in PIO Mode.");
|
|
return;
|
|
}
|
|
while (size && (!(irqstat & IRQSTAT_TC))) {
|
|
udelay(100); /* Wait before last byte transfer complete */
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
databuf = in_le32(®s->datport);
|
|
*((uint *)buffer) = databuf;
|
|
buffer += 4;
|
|
size -= 4;
|
|
}
|
|
blocks--;
|
|
}
|
|
} else {
|
|
blocks = data->blocks;
|
|
buffer = (char *)data->src;
|
|
while (blocks) {
|
|
timeout = PIO_TIMEOUT;
|
|
size = data->blocksize;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BWEN)
|
|
&& --timeout);
|
|
if (timeout <= 0) {
|
|
printf("\nData Write Failed in PIO Mode.");
|
|
return;
|
|
}
|
|
while (size && (!(irqstat & IRQSTAT_TC))) {
|
|
udelay(100); /* Wait before last byte transfer complete */
|
|
databuf = *((uint *)buffer);
|
|
buffer += 4;
|
|
size -= 4;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
out_le32(®s->datport, databuf);
|
|
}
|
|
blocks--;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
|
|
{
|
|
int timeout;
|
|
struct fsl_esdhc_cfg *cfg = mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
uint wml_value;
|
|
|
|
wml_value = data->blocksize/4;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
if (wml_value > WML_RD_WML_MAX)
|
|
wml_value = WML_RD_WML_MAX_VAL;
|
|
|
|
esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value);
|
|
esdhc_write32(®s->dsaddr, (u32)data->dest);
|
|
} else {
|
|
flush_dcache_range((ulong)data->src,
|
|
(ulong)data->src+data->blocks
|
|
*data->blocksize);
|
|
|
|
if (wml_value > WML_WR_WML_MAX)
|
|
wml_value = WML_WR_WML_MAX_VAL;
|
|
if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) {
|
|
printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
|
|
return TIMEOUT;
|
|
}
|
|
|
|
esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK,
|
|
wml_value << 16);
|
|
esdhc_write32(®s->dsaddr, (u32)data->src);
|
|
}
|
|
#else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
|
|
if (!(data->flags & MMC_DATA_READ)) {
|
|
if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) {
|
|
printf("\nThe SD card is locked. "
|
|
"Can not write to a locked card.\n\n");
|
|
return TIMEOUT;
|
|
}
|
|
esdhc_write32(®s->dsaddr, (u32)data->src);
|
|
} else
|
|
esdhc_write32(®s->dsaddr, (u32)data->dest);
|
|
#endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
|
|
|
|
esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize);
|
|
|
|
/* Calculate the timeout period for data transactions */
|
|
/*
|
|
* 1)Timeout period = (2^(timeout+13)) SD Clock cycles
|
|
* 2)Timeout period should be minimum 0.250sec as per SD Card spec
|
|
* So, Number of SD Clock cycles for 0.25sec should be minimum
|
|
* (SD Clock/sec * 0.25 sec) SD Clock cycles
|
|
* = (mmc->clock * 1/4) SD Clock cycles
|
|
* As 1) >= 2)
|
|
* => (2^(timeout+13)) >= mmc->clock * 1/4
|
|
* Taking log2 both the sides
|
|
* => timeout + 13 >= log2(mmc->clock/4)
|
|
* Rounding up to next power of 2
|
|
* => timeout + 13 = log2(mmc->clock/4) + 1
|
|
* => timeout + 13 = fls(mmc->clock/4)
|
|
*/
|
|
timeout = fls(mmc->clock/4);
|
|
timeout -= 13;
|
|
|
|
if (timeout > 14)
|
|
timeout = 14;
|
|
|
|
if (timeout < 0)
|
|
timeout = 0;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
|
|
if ((timeout == 4) || (timeout == 8) || (timeout == 12))
|
|
timeout++;
|
|
#endif
|
|
|
|
#ifdef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
|
|
timeout = 0xE;
|
|
#endif
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void check_and_invalidate_dcache_range
|
|
(struct mmc_cmd *cmd,
|
|
struct mmc_data *data) {
|
|
unsigned start = (unsigned)data->dest ;
|
|
unsigned size = roundup(ARCH_DMA_MINALIGN,
|
|
data->blocks*data->blocksize);
|
|
unsigned end = start+size ;
|
|
invalidate_dcache_range(start, end);
|
|
}
|
|
/*
|
|
* Sends a command out on the bus. Takes the mmc pointer,
|
|
* a command pointer, and an optional data pointer.
|
|
*/
|
|
static int
|
|
esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
int err = 0;
|
|
uint xfertyp;
|
|
uint irqstat;
|
|
struct fsl_esdhc_cfg *cfg = mmc->priv;
|
|
volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
return 0;
|
|
#endif
|
|
|
|
esdhc_write32(®s->irqstat, -1);
|
|
|
|
sync();
|
|
|
|
/* Wait for the bus to be idle */
|
|
while ((esdhc_read32(®s->prsstat) & PRSSTAT_CICHB) ||
|
|
(esdhc_read32(®s->prsstat) & PRSSTAT_CIDHB))
|
|
;
|
|
|
|
while (esdhc_read32(®s->prsstat) & PRSSTAT_DLA)
|
|
;
|
|
|
|
/* Wait at least 8 SD clock cycles before the next command */
|
|
/*
|
|
* Note: This is way more than 8 cycles, but 1ms seems to
|
|
* resolve timing issues with some cards
|
|
*/
|
|
udelay(1000);
|
|
|
|
/* Set up for a data transfer if we have one */
|
|
if (data) {
|
|
err = esdhc_setup_data(mmc, data);
|
|
if(err)
|
|
return err;
|
|
}
|
|
|
|
/* Figure out the transfer arguments */
|
|
xfertyp = esdhc_xfertyp(cmd, data);
|
|
|
|
/* Mask all irqs */
|
|
esdhc_write32(®s->irqsigen, 0);
|
|
|
|
/* Send the command */
|
|
esdhc_write32(®s->cmdarg, cmd->cmdarg);
|
|
#if defined(CONFIG_FSL_USDHC)
|
|
esdhc_write32(®s->mixctrl,
|
|
(esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F));
|
|
esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000);
|
|
#else
|
|
esdhc_write32(®s->xfertyp, xfertyp);
|
|
#endif
|
|
|
|
/* Wait for the command to complete */
|
|
while (!(esdhc_read32(®s->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
|
|
;
|
|
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
|
|
if (irqstat & CMD_ERR) {
|
|
err = COMM_ERR;
|
|
goto out;
|
|
}
|
|
|
|
if (irqstat & IRQSTAT_CTOE) {
|
|
err = TIMEOUT;
|
|
goto out;
|
|
}
|
|
|
|
/* Workaround for ESDHC errata ENGcm03648 */
|
|
if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
|
|
int timeout = 2500;
|
|
|
|
/* Poll on DATA0 line for cmd with busy signal for 250 ms */
|
|
while (timeout > 0 && !(esdhc_read32(®s->prsstat) &
|
|
PRSSTAT_DAT0)) {
|
|
udelay(100);
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout <= 0) {
|
|
printf("Timeout waiting for DAT0 to go high!\n");
|
|
err = TIMEOUT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Copy the response to the response buffer */
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0;
|
|
|
|
cmdrsp3 = esdhc_read32(®s->cmdrsp3);
|
|
cmdrsp2 = esdhc_read32(®s->cmdrsp2);
|
|
cmdrsp1 = esdhc_read32(®s->cmdrsp1);
|
|
cmdrsp0 = esdhc_read32(®s->cmdrsp0);
|
|
cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24);
|
|
cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24);
|
|
cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24);
|
|
cmd->response[3] = (cmdrsp0 << 8);
|
|
} else
|
|
cmd->response[0] = esdhc_read32(®s->cmdrsp0);
|
|
|
|
/* Wait until all of the blocks are transferred */
|
|
if (data) {
|
|
#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
esdhc_pio_read_write(mmc, data);
|
|
#else
|
|
do {
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
|
|
if (irqstat & IRQSTAT_DTOE) {
|
|
err = TIMEOUT;
|
|
goto out;
|
|
}
|
|
|
|
if (irqstat & DATA_ERR) {
|
|
err = COMM_ERR;
|
|
goto out;
|
|
}
|
|
} while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
|
|
#endif
|
|
if (data->flags & MMC_DATA_READ)
|
|
check_and_invalidate_dcache_range(cmd, data);
|
|
}
|
|
|
|
out:
|
|
/* Reset CMD and DATA portions on error */
|
|
if (err) {
|
|
esdhc_write32(®s->sysctl, esdhc_read32(®s->sysctl) |
|
|
SYSCTL_RSTC);
|
|
while (esdhc_read32(®s->sysctl) & SYSCTL_RSTC)
|
|
;
|
|
|
|
if (data) {
|
|
esdhc_write32(®s->sysctl,
|
|
esdhc_read32(®s->sysctl) |
|
|
SYSCTL_RSTD);
|
|
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTD))
|
|
;
|
|
}
|
|
}
|
|
|
|
esdhc_write32(®s->irqstat, -1);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void set_sysctl(struct mmc *mmc, uint clock)
|
|
{
|
|
int div, pre_div;
|
|
struct fsl_esdhc_cfg *cfg = mmc->priv;
|
|
volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
int sdhc_clk = cfg->sdhc_clk;
|
|
uint clk;
|
|
|
|
if (clock < mmc->cfg->f_min)
|
|
clock = mmc->cfg->f_min;
|
|
|
|
if (sdhc_clk / 16 > clock) {
|
|
for (pre_div = 2; pre_div < 256; pre_div *= 2)
|
|
if ((sdhc_clk / pre_div) <= (clock * 16))
|
|
break;
|
|
} else
|
|
pre_div = 2;
|
|
|
|
for (div = 1; div <= 16; div++)
|
|
if ((sdhc_clk / (div * pre_div)) <= clock)
|
|
break;
|
|
|
|
pre_div >>= 1;
|
|
div -= 1;
|
|
|
|
clk = (pre_div << 8) | (div << 4);
|
|
|
|
esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN);
|
|
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk);
|
|
|
|
udelay(10000);
|
|
|
|
clk = SYSCTL_PEREN | SYSCTL_CKEN;
|
|
|
|
esdhc_setbits32(®s->sysctl, clk);
|
|
}
|
|
|
|
static void esdhc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
|
|
/* Set the clock speed */
|
|
set_sysctl(mmc, mmc->clock);
|
|
|
|
/* Set the bus width */
|
|
esdhc_clrbits32(®s->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
|
|
|
|
if (mmc->bus_width == 4)
|
|
esdhc_setbits32(®s->proctl, PROCTL_DTW_4);
|
|
else if (mmc->bus_width == 8)
|
|
esdhc_setbits32(®s->proctl, PROCTL_DTW_8);
|
|
|
|
}
|
|
|
|
static int esdhc_init(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
int timeout = 1000;
|
|
|
|
/* Reset the entire host controller */
|
|
esdhc_setbits32(®s->sysctl, SYSCTL_RSTA);
|
|
|
|
/* Wait until the controller is available */
|
|
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
|
|
udelay(1000);
|
|
|
|
#ifndef ARCH_MXC
|
|
/* Enable cache snooping */
|
|
esdhc_write32(®s->scr, 0x00000040);
|
|
#endif
|
|
|
|
esdhc_setbits32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
|
|
|
|
/* Set the initial clock speed */
|
|
mmc_set_clock(mmc, 400000);
|
|
|
|
/* Disable the BRR and BWR bits in IRQSTAT */
|
|
esdhc_clrbits32(®s->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
|
|
|
|
/* Put the PROCTL reg back to the default */
|
|
esdhc_write32(®s->proctl, PROCTL_INIT);
|
|
|
|
/* Set timout to the maximum value */
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int esdhc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
int timeout = 1000;
|
|
|
|
#ifdef CONFIG_ESDHC_DETECT_QUIRK
|
|
if (CONFIG_ESDHC_DETECT_QUIRK)
|
|
return 1;
|
|
#endif
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_CINS) && --timeout)
|
|
udelay(1000);
|
|
|
|
return timeout > 0;
|
|
}
|
|
|
|
static void esdhc_reset(struct fsl_esdhc *regs)
|
|
{
|
|
unsigned long timeout = 100; /* wait max 100 ms */
|
|
|
|
/* reset the controller */
|
|
esdhc_setbits32(®s->sysctl, SYSCTL_RSTA);
|
|
|
|
/* hardware clears the bit when it is done */
|
|
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
|
|
udelay(1000);
|
|
if (!timeout)
|
|
printf("MMC/SD: Reset never completed.\n");
|
|
}
|
|
|
|
static const struct mmc_ops esdhc_ops = {
|
|
.send_cmd = esdhc_send_cmd,
|
|
.set_ios = esdhc_set_ios,
|
|
.init = esdhc_init,
|
|
.getcd = esdhc_getcd,
|
|
};
|
|
|
|
int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
|
|
{
|
|
struct fsl_esdhc *regs;
|
|
struct mmc *mmc;
|
|
u32 caps, voltage_caps;
|
|
|
|
if (!cfg)
|
|
return -1;
|
|
|
|
regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
|
|
/* First reset the eSDHC controller */
|
|
esdhc_reset(regs);
|
|
|
|
esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
|
|
| SYSCTL_IPGEN | SYSCTL_CKEN);
|
|
|
|
memset(&cfg->cfg, 0, sizeof(cfg->cfg));
|
|
|
|
voltage_caps = 0;
|
|
caps = regs->hostcapblt;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
|
|
caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
|
|
ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
|
|
#endif
|
|
|
|
/* T4240 host controller capabilities register should have VS33 bit */
|
|
#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
|
|
caps = caps | ESDHC_HOSTCAPBLT_VS33;
|
|
#endif
|
|
|
|
if (caps & ESDHC_HOSTCAPBLT_VS18)
|
|
voltage_caps |= MMC_VDD_165_195;
|
|
if (caps & ESDHC_HOSTCAPBLT_VS30)
|
|
voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31;
|
|
if (caps & ESDHC_HOSTCAPBLT_VS33)
|
|
voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
cfg->cfg.name = "FSL_SDHC";
|
|
cfg->cfg.ops = &esdhc_ops;
|
|
#ifdef CONFIG_SYS_SD_VOLTAGE
|
|
cfg->cfg.voltages = CONFIG_SYS_SD_VOLTAGE;
|
|
#else
|
|
cfg->cfg.voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
#endif
|
|
if ((cfg->cfg.voltages & voltage_caps) == 0) {
|
|
printf("voltage not supported by controller\n");
|
|
return -1;
|
|
}
|
|
|
|
cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC;
|
|
|
|
if (cfg->max_bus_width > 0) {
|
|
if (cfg->max_bus_width < 8)
|
|
cfg->cfg.host_caps &= ~MMC_MODE_8BIT;
|
|
if (cfg->max_bus_width < 4)
|
|
cfg->cfg.host_caps &= ~MMC_MODE_4BIT;
|
|
}
|
|
|
|
if (caps & ESDHC_HOSTCAPBLT_HSS)
|
|
cfg->cfg.host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
|
|
#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK
|
|
if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK)
|
|
cfg->cfg.host_caps &= ~MMC_MODE_8BIT;
|
|
#endif
|
|
|
|
cfg->cfg.f_min = 400000;
|
|
cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000);
|
|
|
|
cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
mmc = mmc_create(&cfg->cfg, cfg);
|
|
if (mmc == NULL)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int fsl_esdhc_mmc_init(bd_t *bis)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg;
|
|
|
|
cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1);
|
|
cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
|
|
cfg->sdhc_clk = gd->arch.sdhc_clk;
|
|
return fsl_esdhc_initialize(bis, cfg);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_LIBFDT
|
|
void fdt_fixup_esdhc(void *blob, bd_t *bd)
|
|
{
|
|
const char *compat = "fsl,esdhc";
|
|
|
|
#ifdef CONFIG_FSL_ESDHC_PIN_MUX
|
|
if (!hwconfig("esdhc")) {
|
|
do_fixup_by_compat(blob, compat, "status", "disabled",
|
|
8 + 1, 1);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
do_fixup_by_compat_u32(blob, compat, "clock-frequency",
|
|
gd->arch.sdhc_clk, 1);
|
|
|
|
do_fixup_by_compat(blob, compat, "status", "okay",
|
|
4 + 1, 1);
|
|
}
|
|
#endif
|