mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 15:38:51 +09:00
306 lines
11 KiB
C
306 lines
11 KiB
C
/*
|
|
* (C) Copyright 2004
|
|
* Texas Instruments, <www.ti.com>
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/omap2420.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/bits.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/clocks.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/sys_info.h>
|
|
|
|
/************************************************************
|
|
* sdelay() - simple spin loop. Will be constant time as
|
|
* its generally used in 12MHz bypass conditions only. This
|
|
* is necessary until timers are accessible.
|
|
*
|
|
* not inline to increase chances its in cache when called
|
|
*************************************************************/
|
|
void sdelay (unsigned long loops)
|
|
{
|
|
__asm__ volatile ("1:\n"
|
|
"subs %0, %1, #1\n"
|
|
"bne 1b":"=r" (loops):"0" (loops));
|
|
}
|
|
|
|
/*********************************************************************************
|
|
* prcm_init() - inits clocks for PRCM as defined in clocks.h (config II default).
|
|
* -- called from SRAM, or Flash (using temp SRAM stack).
|
|
*********************************************************************************/
|
|
void prcm_init(void)
|
|
{
|
|
u32 rev,div;
|
|
#ifdef CONFIG_PARTIAL_SRAM
|
|
void (*f_lock_pll) (u32, u32, u32, u32);
|
|
extern void *_end_vect, *_start;
|
|
|
|
f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
|
|
#endif
|
|
|
|
__raw_writel(0, CM_FCLKEN1_CORE); /* stop all clocks to reduce ringing */
|
|
__raw_writel(0, CM_FCLKEN2_CORE); /* may not be necessary */
|
|
__raw_writel(0, CM_ICLKEN1_CORE);
|
|
__raw_writel(0, CM_ICLKEN2_CORE);
|
|
|
|
__raw_writel(DPLL_OUT, CM_CLKSEL2_PLL); /* set DPLL out */
|
|
__raw_writel(MPU_DIV, CM_CLKSEL_MPU); /* set MPU divider */
|
|
__raw_writel(DSP_DIV, CM_CLKSEL_DSP); /* set dsp and iva dividers */
|
|
__raw_writel(GFX_DIV, CM_CLKSEL_GFX); /* set gfx dividers */
|
|
|
|
rev = get_cpu_rev();
|
|
if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
|
|
div = BUS_DIV_ES1;
|
|
else
|
|
div = BUS_DIV;
|
|
__raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
|
|
sdelay(1000);
|
|
|
|
#ifndef CONFIG_PARTIAL_SRAM
|
|
/* If running fully from SRAM this is OK. The Flash bus drops out for just a little.
|
|
* but then comes back. If running from Flash this sequence kills you, thus you need
|
|
* to run it using CONFIG_PARTIAL_SRAM.
|
|
*/
|
|
__raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
|
|
wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
|
|
|
|
/* set clock selection and dpll dividers. */
|
|
__raw_writel(DPLL_VAL, CM_CLKSEL1_PLL); /* set pll for target rate */
|
|
__raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
|
|
sdelay(10000);
|
|
__raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
|
|
sdelay(10000);
|
|
wait_on_value(BIT0|BIT1, BIT2, CM_IDLEST_CKGEN, LDELAY); /*wait for dpll lock */
|
|
#else
|
|
/* if running from flash, need to jump to small relocated code area in SRAM.
|
|
* This is the only safe spot to do configurations from.
|
|
*/
|
|
(*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
|
|
#endif
|
|
|
|
__raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL); /* enable apll */
|
|
wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY); /* wait for apll lock */
|
|
sdelay(1000);
|
|
}
|
|
|
|
/***********************************************
|
|
* memif_init() - init the gpmc and sdrc
|
|
* - early init routines, called from flash or
|
|
* SRAM.
|
|
***********************************************/
|
|
void memif_init(void)
|
|
{
|
|
sdrc_init();
|
|
#ifndef CONFIG_PARTIAL_SRAM /* don't init if calling from flash */
|
|
gpmc_init();
|
|
#endif
|
|
}
|
|
|
|
/********************************************************
|
|
* mem_ok() - test used to see if timings are correct
|
|
* for a part. Helps in gussing which part
|
|
* we are currently using.
|
|
*******************************************************/
|
|
u32 mem_ok(void)
|
|
{ u32 val;
|
|
__raw_writel(0x0,OMAP2420_SDRC_CS0+0x400); /* clear pos A */
|
|
__raw_writel(0x12345678, OMAP2420_SDRC_CS0);/* pattern to pos B */
|
|
val = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
|
|
if (val != 0) /* see if pos A value changed*/
|
|
return(0);
|
|
else
|
|
return(1);
|
|
}
|
|
|
|
/********************************************************
|
|
* sdrc_init() - init the sdrc chip selects CS0 and CS1
|
|
* - early init routines, called from flash or
|
|
* SRAM.
|
|
*******************************************************/
|
|
void sdrc_init(void)
|
|
{
|
|
#define EARLY_INIT 1
|
|
do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); /* only init up first bank here */
|
|
}
|
|
|
|
/**********************************************************
|
|
* do_sdrc_init(): initialize the SDRAM for use.
|
|
* -called from low level code with stack only.
|
|
* -code sets up SDRAM timing and muxing for 2422 or 2420.
|
|
* -optimal settings can be placed here, or redone after i2c
|
|
* inspection of board info
|
|
*
|
|
* !!! When ES1 comes out need to conditionalize RFR value!!!
|
|
**********************************************************/
|
|
void do_sdrc_init(u32 offset, u32 early)
|
|
{
|
|
u32 cpu, bug=0, rev, shared=0, cs0=0, pmask=0,first=1;
|
|
sdrc_data_t *sdata; /* do not change type */
|
|
|
|
static const sdrc_data_t sdrc_2422 =
|
|
{
|
|
H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0, H4_2422_SDRC_ACTIM_CTRLA_0,
|
|
H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0,
|
|
H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL
|
|
};
|
|
static const sdrc_data_t sdrc_2420 =
|
|
{
|
|
H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0, H4_2420_SDRC_ACTIM_CTRLA_0,
|
|
H4_2420_SDRC_ACTIM_CTRLB_0, H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0,
|
|
H4_2420_SDRC_DLLA_CTRL, H4_2420_SDRC_DLLB_CTRL
|
|
};
|
|
|
|
if (offset == SDRC_CS0_OSET)
|
|
cs0 = shared = 1; /* int regs shared between both chip select */
|
|
|
|
cpu = get_cpu_type();
|
|
|
|
/* warning generated, though code generation is correct. this may bite later, but is ok for now.
|
|
* there is only so much C code you can do on stack only operation.
|
|
*/
|
|
if (cpu == CPU_2422)
|
|
sdata = &sdrc_2422;
|
|
else
|
|
sdata = &sdrc_2420;
|
|
__asm__ __volatile__("": : :"memory");
|
|
#ifdef CONFIG_PARTIAL_SRAM
|
|
/* u-boot is compiled to run in DDR at 8xxxxxxx. If we use data here which is not pc relative
|
|
* we need to get the address correct. We need to find the current flash mapping to dress up
|
|
* the initial pointer load. As long as this is const data we should be ok.
|
|
*/
|
|
if(early)
|
|
sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
|
|
#endif
|
|
|
|
men_combo:
|
|
|
|
if (!early && get_mem_type() == DDR_COMBO) { /* combo part has a shared CKE signal, can't use feature */
|
|
pmask = BIT2;
|
|
first = 0; /* trigger ddr_combo init */
|
|
}
|
|
|
|
if (shared) {
|
|
__raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
|
|
__raw_writel(SMART_IDLE|SOFTRESET, SDRC_SYSCONFIG); /* reset sdrc */
|
|
wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000); /* wait till reset done set */
|
|
__raw_writel(SMART_IDLE, SDRC_SYSCONFIG); /* clear soft reset */
|
|
__raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
|
|
__raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
|
|
}
|
|
if (first)
|
|
__raw_writel(sdata->sdrc_mdcfg_0, SDRC_MCFG_0+offset);
|
|
else {
|
|
__raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
|
|
__raw_writel(H4_2420_COMBO_MDCFG_0,SDRC_MCFG_0+offset);
|
|
}
|
|
|
|
if (cs0) {
|
|
__raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_0);
|
|
__raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_0);
|
|
} else {
|
|
__raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_1);
|
|
__raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_1);
|
|
}
|
|
|
|
__raw_writel(sdata->sdrc_rfr_ctrl, SDRC_RFR_CTRL+offset);
|
|
|
|
/* init sequence for _mDDR_ using manual commands (DDR is a bit different) */
|
|
__raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
|
|
sdelay(5000); /* susposed to be 100us per design spec for mddr*/
|
|
__raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
|
|
__raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
|
|
__raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
|
|
|
|
/*
|
|
* CSx SDRC Mode Register
|
|
* Burst length = 4 - DDR memory
|
|
* Serial mode
|
|
* CAS latency = x
|
|
*/
|
|
__raw_writel(sdata->sdrc_mr_0, SDRC_MR_0+offset);
|
|
|
|
/* NOTE: ES1 242x _BUG_ DLL */
|
|
rev = get_cpu_rev();
|
|
if (rev == CPU_2420_ES1 || rev == CPU_2422_ES1)
|
|
bug = BIT0;
|
|
/* enable & load up DLL with good value for 75MHz, and set phase to 90% */
|
|
if (shared) {
|
|
__raw_writel(sdata->sdrc_dlla_ctrl, SDRC_DLLA_CTRL);
|
|
__raw_writel(sdata->sdrc_dlla_ctrl & ~(BIT2|bug), SDRC_DLLA_CTRL);
|
|
__raw_writel(sdata->sdrc_dllb_ctrl, SDRC_DLLB_CTRL);
|
|
__raw_writel(sdata->sdrc_dllb_ctrl & ~(BIT2|bug) , SDRC_DLLB_CTRL);
|
|
}
|
|
sdelay(9000);
|
|
if (!first || mem_ok()) /* passed test or 2nd bank init */
|
|
return;
|
|
else {
|
|
first = 0;
|
|
goto men_combo;
|
|
}
|
|
}
|
|
|
|
|
|
/*****************************************************
|
|
* gpmc_init(): init gpmc bus
|
|
* Init GPMC for x16, MuxMode (SDRAM in x32).
|
|
* This code can only be executed from SRAM or SDRAM.
|
|
*****************************************************/
|
|
void gpmc_init(void)
|
|
{
|
|
u32 mux=0, mtype, mwidth;
|
|
|
|
/* global settings */
|
|
__raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
|
|
__raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
|
|
__raw_writel(0x1, GPMC_TIMEOUT_CONTROL);/* timeout disable */
|
|
__raw_writel(0x111, GPMC_CONFIG); /* set nWP, disable limited addr */
|
|
|
|
/* discover bus connection from sysboot */
|
|
if (is_gpmc_muxed() == GPMC_MUXED)
|
|
mux = BIT9;
|
|
mtype = get_gpmc0_type();
|
|
mwidth = get_gpmc0_width();
|
|
|
|
/* setup cs0 */
|
|
__raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
|
|
sdelay(1000);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
|
|
/* __raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); */
|
|
__raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
|
|
/* __raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); */
|
|
__raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
|
|
sdelay(2000);
|
|
|
|
/* setup cs1 */
|
|
__raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
|
|
sdelay(1000);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG1_1|mux, GPMC_CONFIG1_1);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
|
|
__raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
|
|
sdelay(2000);
|
|
}
|