mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 15:38:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
249 lines
8.0 KiB
C
249 lines
8.0 KiB
C
/*
|
|
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Based on davinci_dvevm.h. Original Copyrights follow:
|
|
*
|
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* Board
|
|
*/
|
|
#define CONFIG_DRIVER_TI_EMAC
|
|
#define CONFIG_USE_SPIFLASH
|
|
#define CONFIG_SYS_USE_NAND
|
|
#define CONFIG_DRIVER_TI_EMAC_USE_RMII
|
|
#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
|
|
#define CONFIG_PREBOOT
|
|
|
|
/*
|
|
* SoC Configuration
|
|
*/
|
|
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
|
|
#define CONFIG_SYS_OSCIN_FREQ 24000000
|
|
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
|
|
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_DA8XX_GPIO
|
|
|
|
/*
|
|
* Memory Info
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */
|
|
#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
|
|
#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
|
|
#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
|
|
|
|
/* memtest start addr */
|
|
#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
|
|
|
|
/* memtest will be run on 16MB */
|
|
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
|
|
/*
|
|
* Serial Driver info
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
|
|
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
|
|
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
|
|
|
|
#define CONFIG_SPI
|
|
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
|
|
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
|
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
|
|
|
/*
|
|
* I2C Configuration
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_DAVINCI
|
|
#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
|
|
#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
|
|
|
|
/*
|
|
* Network & Ethernet Configuration
|
|
*/
|
|
#ifdef CONFIG_DRIVER_TI_EMAC
|
|
#define CONFIG_MII
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
#endif
|
|
|
|
#ifdef CONFIG_USE_SPIFLASH
|
|
#define CONFIG_ENV_SIZE (8 << 10)
|
|
#define CONFIG_ENV_OFFSET 0x80000
|
|
#define CONFIG_ENV_SECT_SIZE (64 << 10)
|
|
#endif
|
|
|
|
#if defined(CONFIG_VIDEO)
|
|
#define CONFIG_VIDEO_DA8XX
|
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
#endif
|
|
|
|
/*
|
|
* U-Boot general configuration
|
|
*/
|
|
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
|
|
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
|
|
#define CONFIG_MX_CYCLIC
|
|
|
|
/*
|
|
* Linux Information
|
|
*/
|
|
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
|
|
#ifdef CONFIG_CMD_BDI
|
|
#define CONFIG_CLOCKS
|
|
#endif
|
|
|
|
#ifndef CONFIG_DRIVER_TI_EMAC
|
|
#endif
|
|
|
|
/* NAND Setup */
|
|
#ifdef CONFIG_SYS_USE_NAND
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
|
|
#define CONFIG_NAND_DAVINCI
|
|
#define CONFIG_SYS_NAND_PAGE_2K
|
|
#define CONFIG_SYS_NAND_NO_SUBPAGE
|
|
#define CONFIG_SYS_NAND_CS 2
|
|
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
|
|
#undef CONFIG_SYS_NAND_HW_ECC
|
|
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
|
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
|
|
#endif
|
|
|
|
/* SPI Flash */
|
|
#ifdef CONFIG_USE_SPIFLASH
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SYS_USE_NAND) && \
|
|
!defined(CONFIG_USE_NOR) && \
|
|
!defined(CONFIG_USE_SPIFLASH)
|
|
#define CONFIG_ENV_SIZE (16 << 10)
|
|
#endif
|
|
|
|
/* additions for new relocation code, must added to all boards */
|
|
#define CONFIG_SYS_SDRAM_BASE 0xc0000000
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
/*
|
|
* Default environment and default scripts
|
|
* to update uboot and load kernel
|
|
*/
|
|
|
|
#define CONFIG_HOSTNAME ea20
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"as=3\0" \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"rfsbargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rfsbpath}\0" \
|
|
"testrfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${testrfspath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw initrd=" \
|
|
"0x${ramdisk_addr_r},4M\0" \
|
|
"mtdids=nand0=davinci_nand.0\0" \
|
|
"serverip=192.168.5.249\0" \
|
|
"ipaddr=192.168.5.248\0" \
|
|
"rootpath=/opt/eldk/arm\0" \
|
|
"splashpos=230,180\0" \
|
|
"testrfspath=/opt/eldk/test_arm\0" \
|
|
"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \
|
|
"ubi.mtd=${as} root=ubi0:rootfs\0" \
|
|
"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \
|
|
"ubi.mtd=${as} root=ubi0:rootfs\0" \
|
|
"addip_sta=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
|
|
"addip=if test -n ${ipdyn};then run addip_dyn;" \
|
|
"else run addip_sta;fi\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"addtty=setenv bootargs ${bootargs}" \
|
|
" console=${consoledev},${baudrate}n8\0" \
|
|
"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
|
|
"addmem=setenv bootargs ${bootargs} mem=${memory}\0" \
|
|
"consoledev=ttyS0\0" \
|
|
"loadaddr=c0000014\0" \
|
|
"memory=32M\0" \
|
|
"kernel_addr_r=c0700000\0" \
|
|
"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
|
|
"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
|
|
"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0" \
|
|
"flash_self=run ramargs addip addtty addmtd addmisc addmem;" \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
|
"run nfsargs addip addtty addmtd addmisc addmem;" \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \
|
|
"run rfsbargs addip addtty addmtd addmisc addmem; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
|
"run testrfsargs addip addtty addmtd addmisc addmem; " \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
|
|
"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
|
|
"nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
|
|
"ubifsload ${kernel_addr_r} /boot/uImage;" \
|
|
"ubifsumount; run nandargs addip addtty " \
|
|
"addmtd addmisc addmem;clrlogo;" \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
|
|
"ubifsload ${kernel_addr_r} /boot/uImage;" \
|
|
"ubifsumount; run nandrwargs addip addtty " \
|
|
"addmtd addmisc addmem;clrlogo;" \
|
|
"bootm ${kernel_addr_r}\0" \
|
|
"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \
|
|
" addip addtty addmtd addmisc addmem;" \
|
|
"clrlogo;bootm ${kernel_addr_r}\0" \
|
|
"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
|
|
"load_magic=if sf probe 0;then sf " \
|
|
"read c0000000 0x10000 0x60000;fi\0" \
|
|
"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
|
|
"if ubifsload c0000014 /boot/u-boot.bin;" \
|
|
"then mw c0000008 ${filesize};else echo Error reading" \
|
|
" u-boot from nand!;fi\0" \
|
|
"load_net=if sf probe 0;then sf read c0000000 0x10000 " \
|
|
"0x60000;tftp c0000014 ${u-boot};" \
|
|
"mw c0000008 ${filesize};fi\0" \
|
|
"upd=if sf probe 0;then sf erase 10000 60000;" \
|
|
"sf write c0000000 10000 60000;fi\0" \
|
|
"ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \
|
|
"sf erase 0 10000;" \
|
|
"sf write 0xc0700000 0 ${filesize};fi\0" \
|
|
"ubootupd_net=if run load_net;then echo Updating u-boot;" \
|
|
"if run upd; then echo U-Boot updated;" \
|
|
"else echo Error updating u-boot !;" \
|
|
"echo Board without bootloader !!;" \
|
|
"fi;" \
|
|
"else echo U-Boot not downloaded..exiting;fi\0" \
|
|
"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \
|
|
"bootcmd=run net_testrfs\0"
|
|
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#endif /* __CONFIG_H */
|