u-boot-brain/arch/arm/mach-tegra/tegra210/Kconfig
Stephen Warren f097532d27 ARM: tegra: use CONFIG_SYS_INIT_SP_BSS_OFFSET
Enable CONFIG_SYS_INIT_SP_BSS_OFFSET for all 64-bit Tegra boards. Place
the stack/... 512KiB from the end of the U-Boot binary. This should be
plenty to accommodate the current DTBs (max 64 KiB), early malloc region
(6KiB), stack usage, and plenty of slack, while still not placing it too
far away from the U-Boot binary.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-01-12 09:52:11 -07:00

52 lines
1.4 KiB
Plaintext

if TEGRA210
choice
prompt "Tegra210 board select"
config TARGET_E2220_1170
bool "NVIDIA Tegra210 E2220-1170 board"
select BOARD_LATE_INIT
help
E2220-1170 is a Tegra210 bringup board with onboard SoC, DRAM,
eMMC, SD card slot, HDMI, USB micro-B port, and sockets for various
expansion modules.
config TARGET_P2371_0000
bool "NVIDIA Tegra210 P2371-0000 board"
select BOARD_LATE_INIT
help
P2371-0000 is a P2581 or P2530 CPU board married to a P2595 I/O
board. The combination contains SoC, DRAM, eMMC, SD card slot,
HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA,
a GPIO expansion header, and an analog audio jack.
config TARGET_P2371_2180
bool "NVIDIA Tegra210 P2371-2180 (Jetson TX1) board"
select BOARD_LATE_INIT
help
P2371-2180 (Jetson TX1 developer kit) is a P2180 CPU board married
to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD
card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host
port, SATA, PCIe, and two GPIO expansion headers.
config TARGET_P2571
bool "NVIDIA Tegra210 P2571 base board"
select BOARD_LATE_INIT
help
P2571 is a P2530 married to a P1963 I/O board
endchoice
config SYS_SOC
default "tegra210"
config SYS_INIT_SP_BSS_OFFSET
default 524288
source "board/nvidia/e2220-1170/Kconfig"
source "board/nvidia/p2371-0000/Kconfig"
source "board/nvidia/p2371-2180/Kconfig"
source "board/nvidia/p2571/Kconfig"
endif