mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Masahiro Yamada](/assets/img/avatar_default.png)
This commit moves files as follows: arch/arm/cpu/arm720t/tegra20/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/arm720t/tegra30/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/arm720t/tegra114/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/arm720t/tegra124* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/arm720t/tegra-common/* -> arch/arm/mach-tegra/* arch/arm/cpu/armv7/tegra20/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/armv7/tegra30/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/armv7/tegra114/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/armv7/tegra124/* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/armv7/tegra-common/* -> arch/arm/mach-tegra/* arch/arm/cpu/tegra20-common/* -> arch/arm/mach-tegra/tegra20/* arch/arm/cpu/tegra30-common/* -> arch/arm/mach-tegra/tegra30/* arch/arm/cpu/tegra114-common/* -> arch/arm/mach-tegra/tegra114/* arch/arm/cpu/tegra124-common/* -> arch/arm/mach-tegra/tegra124/* arch/arm/cpu/tegra-common/* -> arch/arm/mach-tegra/* Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> [ on nyan-big ] Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
237 lines
6.7 KiB
C
237 lines
6.7 KiB
C
/*
|
|
* (C) Copyright 2010 - 2011
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/flow.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/arch-tegra/ap.h>
|
|
#include <asm/arch-tegra/apb_misc.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/pmc.h>
|
|
#include <asm/arch-tegra/warmboot.h>
|
|
#include "warmboot_avp.h"
|
|
|
|
#define DEBUG_RESET_CORESIGHT
|
|
|
|
void wb_start(void)
|
|
{
|
|
struct apb_misc_pp_ctlr *apb_misc =
|
|
(struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
|
|
struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
|
|
struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
union osc_ctrl_reg osc_ctrl;
|
|
union pllx_base_reg pllx_base;
|
|
union pllx_misc_reg pllx_misc;
|
|
union scratch3_reg scratch3;
|
|
u32 reg;
|
|
|
|
/* enable JTAG & TBE */
|
|
writel(CONFIG_CTL_TBE | CONFIG_CTL_JTAG, &apb_misc->cfg_ctl);
|
|
|
|
/* Are we running where we're supposed to be? */
|
|
asm volatile (
|
|
"adr %0, wb_start;" /* reg: wb_start address */
|
|
: "=r"(reg) /* output */
|
|
/* no input, no clobber list */
|
|
);
|
|
|
|
if (reg != NV_WB_RUN_ADDRESS)
|
|
goto do_reset;
|
|
|
|
/* Are we running with AVP? */
|
|
if (readl(NV_PA_PG_UP_BASE + PG_UP_TAG_0) != PG_UP_TAG_AVP)
|
|
goto do_reset;
|
|
|
|
#ifdef DEBUG_RESET_CORESIGHT
|
|
/* Assert CoreSight reset */
|
|
reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
|
|
reg |= SWR_CSITE_RST;
|
|
writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
|
|
#endif
|
|
|
|
/* TODO: Set the drive strength - maybe make this a board parameter? */
|
|
osc_ctrl.word = readl(&clkrst->crc_osc_ctrl);
|
|
osc_ctrl.xofs = 4;
|
|
osc_ctrl.xoe = 1;
|
|
writel(osc_ctrl.word, &clkrst->crc_osc_ctrl);
|
|
|
|
/* Power up the CPU complex if necessary */
|
|
if (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) {
|
|
reg = PWRGATE_TOGGLE_PARTID_CPU | PWRGATE_TOGGLE_START;
|
|
writel(reg, &pmc->pmc_pwrgate_toggle);
|
|
while (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU))
|
|
;
|
|
}
|
|
|
|
/* Remove the I/O clamps from the CPU power partition. */
|
|
reg = readl(&pmc->pmc_remove_clamping);
|
|
reg |= CPU_CLMP;
|
|
writel(reg, &pmc->pmc_remove_clamping);
|
|
|
|
reg = EVENT_ZERO_VAL_20 | EVENT_MSEC | EVENT_MODE_STOP;
|
|
writel(reg, &flow->halt_cop_events);
|
|
|
|
/* Assert CPU complex reset */
|
|
reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
|
|
reg |= CPU_RST;
|
|
writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
|
|
|
|
/* Hold both CPUs in reset */
|
|
reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_CPURESET1 | CPU_CMPLX_DERESET0 |
|
|
CPU_CMPLX_DERESET1 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DBGRESET1;
|
|
writel(reg, &clkrst->crc_cpu_cmplx_set);
|
|
|
|
/* Halt CPU1 at the flow controller for uni-processor configurations */
|
|
writel(EVENT_MODE_STOP, &flow->halt_cpu1_events);
|
|
|
|
/*
|
|
* Set the CPU reset vector. SCRATCH41 contains the physical
|
|
* address of the CPU-side restoration code.
|
|
*/
|
|
reg = readl(&pmc->pmc_scratch41);
|
|
writel(reg, EXCEP_VECTOR_CPU_RESET_VECTOR);
|
|
|
|
/* Select CPU complex clock source */
|
|
writel(CCLK_PLLP_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
|
|
|
|
/* Start the CPU0 clock and stop the CPU1 clock */
|
|
reg = CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 | CPU_CMPLX_CPU0_CLK_STP_RUN |
|
|
CPU_CMPLX_CPU1_CLK_STP_STOP;
|
|
writel(reg, &clkrst->crc_clk_cpu_cmplx);
|
|
|
|
/* Enable the CPU complex clock */
|
|
reg = readl(&clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
|
|
reg |= CLK_ENB_CPU;
|
|
writel(reg, &clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
|
|
|
|
/* Make sure the resets were held for at least 2 microseconds */
|
|
reg = readl(TIMER_USEC_CNTR);
|
|
while (readl(TIMER_USEC_CNTR) <= (reg + 2))
|
|
;
|
|
|
|
#ifdef DEBUG_RESET_CORESIGHT
|
|
/*
|
|
* De-assert CoreSight reset.
|
|
* NOTE: We're leaving the CoreSight clock on the oscillator for
|
|
* now. It will be restored to its original clock source
|
|
* when the CPU-side restoration code runs.
|
|
*/
|
|
reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
|
|
reg &= ~SWR_CSITE_RST;
|
|
writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
|
|
#endif
|
|
|
|
/* Unlock the CPU CoreSight interfaces */
|
|
reg = 0xC5ACCE55;
|
|
writel(reg, CSITE_CPU_DBG0_LAR);
|
|
writel(reg, CSITE_CPU_DBG1_LAR);
|
|
|
|
/*
|
|
* Sample the microsecond timestamp again. This is the time we must
|
|
* use when returning from LP0 for PLL stabilization delays.
|
|
*/
|
|
reg = readl(TIMER_USEC_CNTR);
|
|
writel(reg, &pmc->pmc_scratch1);
|
|
|
|
pllx_base.word = 0;
|
|
pllx_misc.word = 0;
|
|
scratch3.word = readl(&pmc->pmc_scratch3);
|
|
|
|
/* Get the OSC. For 19.2 MHz, use 19 to make the calculations easier */
|
|
reg = (readl(TIMER_USEC_CFG) & USEC_CFG_DIVISOR_MASK) + 1;
|
|
|
|
/*
|
|
* According to the TRM, for 19.2MHz OSC, the USEC_DIVISOR is 0x5f, and
|
|
* USEC_DIVIDEND is 0x04. So, if USEC_DIVISOR > 26, OSC is 19.2 MHz.
|
|
*
|
|
* reg is used to calculate the pllx freq, which is used to determine if
|
|
* to set dccon or not.
|
|
*/
|
|
if (reg > 26)
|
|
reg = 19;
|
|
|
|
/* PLLX_BASE.PLLX_DIVM */
|
|
if (scratch3.pllx_base_divm == reg)
|
|
reg = 0;
|
|
else
|
|
reg = 1;
|
|
|
|
/* PLLX_BASE.PLLX_DIVN */
|
|
pllx_base.divn = scratch3.pllx_base_divn;
|
|
reg = scratch3.pllx_base_divn << reg;
|
|
|
|
/* PLLX_BASE.PLLX_DIVP */
|
|
pllx_base.divp = scratch3.pllx_base_divp;
|
|
reg = reg >> scratch3.pllx_base_divp;
|
|
|
|
pllx_base.bypass = 1;
|
|
|
|
/* PLLX_MISC_DCCON must be set for pllx frequency > 600 MHz. */
|
|
if (reg > 600)
|
|
pllx_misc.dccon = 1;
|
|
|
|
/* PLLX_MISC_LFCON */
|
|
pllx_misc.lfcon = scratch3.pllx_misc_lfcon;
|
|
|
|
/* PLLX_MISC_CPCON */
|
|
pllx_misc.cpcon = scratch3.pllx_misc_cpcon;
|
|
|
|
writel(pllx_misc.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_misc);
|
|
writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
|
|
|
|
pllx_base.enable = 1;
|
|
writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
|
|
pllx_base.bypass = 0;
|
|
writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
|
|
|
|
writel(0, flow->halt_cpu_events);
|
|
|
|
reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DERESET0;
|
|
writel(reg, &clkrst->crc_cpu_cmplx_clr);
|
|
|
|
reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE |
|
|
PLLM_OUT1_RATIO_VAL_8;
|
|
writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out[0]);
|
|
|
|
reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 |
|
|
SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 |
|
|
SCLK_SYS_STATE_IDLE;
|
|
writel(reg, &clkrst->crc_sclk_brst_pol);
|
|
|
|
/* avp_resume: no return after the write */
|
|
reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
|
|
reg &= ~CPU_RST;
|
|
writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
|
|
|
|
/* avp_halt: */
|
|
avp_halt:
|
|
reg = EVENT_MODE_STOP | EVENT_JTAG;
|
|
writel(reg, flow->halt_cop_events);
|
|
goto avp_halt;
|
|
|
|
do_reset:
|
|
/*
|
|
* Execution comes here if something goes wrong. The chip is reset and
|
|
* a cold boot is performed.
|
|
*/
|
|
writel(SWR_TRIG_SYS_RST, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
|
|
goto do_reset;
|
|
}
|
|
|
|
/*
|
|
* wb_end() is a dummy function, and must be directly following wb_start(),
|
|
* and is used to calculate the size of wb_start().
|
|
*/
|
|
void wb_end(void)
|
|
{
|
|
}
|