mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 08:28:51 +09:00
![Joe Hershberger](/assets/img/avatar_default.png)
This sets the default commands Kconfig to match include/config_cmd_default.h commands in the common/Kconfig and removes them from include/configs. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> [trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates] Signed-off-by: Tom Rini <trini@konsulko.com>
356 lines
11 KiB
C
356 lines
11 KiB
C
/*
|
|
* (C) Copyright 2003 Embedded Edge, LLC
|
|
* Dan Malek <dan@embeddededge.com>
|
|
* Copied from ADS85xx.
|
|
* Updates for Silicon Tx GP3 8560 board.
|
|
*
|
|
* (C) Copyright 2002,2003 Motorola,Inc.
|
|
* Xianghua Xiao <X.Xiao@motorola.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* mpc8560ads board configuration file */
|
|
/* please refer to doc/README.mpc85xx for more info */
|
|
/* make sure you change the MAC address and other network params first,
|
|
* search for CONFIG_SERVERIP, etc. in this file
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/* High Level Configuration Options */
|
|
#define CONFIG_BOOKE 1 /* BOOKE */
|
|
#define CONFIG_E500 1 /* BOOKE e500 family */
|
|
#define CONFIG_CPM2 1 /* has CPM2 */
|
|
#define CONFIG_STXGP3 1 /* Silicon Tx GPPP board specific*/
|
|
#define CONFIG_MPC8560 1
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xfff80000
|
|
|
|
#undef CONFIG_PCI /* pci ethernet support */
|
|
#define CONFIG_TSEC_ENET /* tsec ethernet support*/
|
|
#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
|
|
|
|
/* sysclk for MPC85xx
|
|
*/
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 33333333 /* most pci cards are 33Mhz */
|
|
|
|
/* Blinkin' LEDs for Robert :-)
|
|
*/
|
|
#define CONFIG_SHOW_ACTIVITY 1
|
|
|
|
/*
|
|
* These can be toggled for performance analysis, otherwise use default.
|
|
*/
|
|
#define CONFIG_L2_CACHE /* toggle L2 cache */
|
|
#define CONFIG_BTB /* toggle branch predition */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
|
|
#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */
|
|
|
|
#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
|
|
#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00400000
|
|
|
|
|
|
/* Localbus SDRAM is an option, not all boards have it.
|
|
* This address, however, is used to configure a 256M local bus
|
|
* window that includes the Config latch below.
|
|
*/
|
|
#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
|
|
#define CONFIG_SYS_LBC_SDRAM_SIZE 256 /* LBC SDRAM is 64MB */
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */
|
|
#define CONFIG_SYS_BR0_PRELIM 0xff001801 /* port size 32bit */
|
|
|
|
#define CONFIG_SYS_OR0_PRELIM 0xff000ff7 /* 16 MB Flash */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 136 /* sectors per device */
|
|
#undef CONFIG_SYS_FLASH_CHECKSUM
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
/* The configuration latch is Chip Select 1.
|
|
* It's an 8-bit latch in the lower 8 bits of the word.
|
|
*/
|
|
#define CONFIG_SYS_BR1_PRELIM 0xfc001801 /* 32-bit port */
|
|
#define CONFIG_SYS_OR1_PRELIM 0xffff0ff7 /* 64K is enough */
|
|
#define CONFIG_SYS_LBC_LCLDEVS_BASE 0xfc000000 /* Base of localbus devices */
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
|
|
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
#define CONFIG_SYS_RAMBOOT
|
|
#else
|
|
#undef CONFIG_SYS_RAMBOOT
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_RAMBOOT
|
|
#define CONFIG_SYS_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
|
|
#endif
|
|
#define CONFIG_SYS_CCSRBAR 0xfdf00000
|
|
#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
|
|
|
|
/* DDR Setup */
|
|
#define CONFIG_SYS_FSL_DDR1
|
|
#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
|
|
#define CONFIG_DDR_SPD
|
|
#undef CONFIG_FSL_DDR_INTERACTIVE
|
|
|
|
#undef CONFIG_DDR_ECC /* only for ECC DDR module */
|
|
#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */
|
|
#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
|
|
|
|
#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
|
|
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
|
|
#define CONFIG_NUM_DDR_CONTROLLERS 1
|
|
#define CONFIG_DIMM_SLOTS_PER_CTLR 1
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
|
|
|
|
/* I2C addresses of SPD EEPROMs */
|
|
#define SPD_EEPROM_ADDRESS 0x54 /* CTLR 0 DIMM 0 */
|
|
|
|
#undef CONFIG_CLOCKS_IN_MHZ
|
|
|
|
/* local bus definitions */
|
|
#define CONFIG_SYS_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
|
|
#define CONFIG_SYS_OR2_PRELIM 0xfc006901
|
|
#define CONFIG_SYS_LBC_LCRR 0x00030004 /* local bus freq */
|
|
#define CONFIG_SYS_LBC_LBCR 0x00000000
|
|
#define CONFIG_SYS_LBC_LSRT 0x20000000
|
|
#define CONFIG_SYS_LBC_MRTPR 0x20000000
|
|
#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723
|
|
#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723
|
|
#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723
|
|
#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723
|
|
#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723
|
|
|
|
#define CONFIG_SYS_INIT_RAM_LOCK 1
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
|
|
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
|
|
|
|
/* Serial Port */
|
|
#define CONFIG_CONS_ON_SCC /* define if console on SCC */
|
|
#undef CONFIG_CONS_NONE /* define if console on something else */
|
|
#define CONFIG_CONS_INDEX 2 /* which serial channel for console */
|
|
|
|
#define CONFIG_BAUDRATE 38400
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
|
|
|
/* Use the HUSH parser */
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#ifdef CONFIG_SYS_HUSH_PARSER
|
|
#endif
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_FSL
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
|
|
|
|
#if 0
|
|
#define CONFIG_SYS_I2C_NOPROBES {0x00} /* Don't probe these addrs */
|
|
#else
|
|
/* I did the 'if 0' so we could keep the syntax above if ever needed. */
|
|
#undef CONFIG_SYS_I2C_NOPROBES
|
|
#endif
|
|
|
|
/* RapdIO Map configuration, mapped 1:1.
|
|
*/
|
|
#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000
|
|
#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
|
|
#define CONFIG_SYS_RIO_MEM_SIZE 0x200000000 /* 512 M */
|
|
|
|
/* Standard 8560 PCI addressing, mapped 1:1.
|
|
*/
|
|
#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
|
|
#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
|
|
#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
|
|
#define CONFIG_SYS_PCI1_IO_BASE 0xe2000000
|
|
#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE
|
|
#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16 M */
|
|
|
|
#if defined(CONFIG_PCI) /* PCI Ethernet card */
|
|
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
|
|
#undef CONFIG_EEPRO100
|
|
#undef CONFIG_TULIP
|
|
|
|
#if !defined(CONFIG_PCI_PNP)
|
|
#define PCI_ENET0_IOADDR 0xe0000000
|
|
#define PCI_ENET0_MEMADDR 0xe0000000
|
|
#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
|
|
#endif
|
|
|
|
#undef CONFIG_PCI_SCAN_SHOW
|
|
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
|
|
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
|
|
#define CONFIG_MII 1 /* MII PHY management */
|
|
|
|
#define CONFIG_TSEC1 1
|
|
#define CONFIG_TSEC1_NAME "TSEC0"
|
|
#define CONFIG_TSEC2 1
|
|
#define CONFIG_TSEC2_NAME "TSEC1"
|
|
|
|
#define TSEC1_PHY_ADDR 2
|
|
#define TSEC2_PHY_ADDR 4
|
|
#define TSEC1_PHYIDX 0
|
|
#define TSEC2_PHYIDX 0
|
|
#define TSEC1_FLAGS TSEC_GIGABIT
|
|
#define TSEC2_FLAGS TSEC_GIGABIT
|
|
#define CONFIG_ETHPRIME "TSEC0"
|
|
|
|
#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
|
|
|
|
#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */
|
|
#undef CONFIG_ETHER_NONE /* define if ether on something else */
|
|
#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
|
|
|
|
#if (CONFIG_ETHER_INDEX == 2)
|
|
/*
|
|
* - Rx-CLK is CLK13
|
|
* - Tx-CLK is CLK14
|
|
* - Select bus for bd/buffers
|
|
* - Full duplex
|
|
*/
|
|
#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
|
|
#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
|
|
#define CONFIG_SYS_CPMFCR_RAMTYPE 0
|
|
#if 0
|
|
#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE)
|
|
#else
|
|
#define CONFIG_SYS_FCC_PSMR 0
|
|
#endif
|
|
#define FETH2_RST 0x01
|
|
#elif (CONFIG_ETHER_INDEX == 3)
|
|
/* need more definitions here for FE3 */
|
|
#define FETH3_RST 0x80
|
|
#endif /* CONFIG_ETHER_INDEX */
|
|
|
|
/* MDIO is done through the TSEC0 control.
|
|
*/
|
|
#define CONFIG_MII /* MII PHY management */
|
|
#undef CONFIG_BITBANGMII /* bit-bang MII PHY management */
|
|
|
|
#endif
|
|
|
|
/* Environment */
|
|
/* We use the top boot sector flash, so we have some 16K sectors for env
|
|
*/
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x60000)
|
|
#define CONFIG_ENV_SECT_SIZE 0x4000 /* 16K (one top sector) for env */
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#else
|
|
#define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
|
|
#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
|
|
#define CONFIG_ENV_SIZE 0x2000
|
|
#endif
|
|
|
|
#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,38400"
|
|
#define CONFIG_BOOTCOMMAND "bootm 0xff000000 0xff100000"
|
|
#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_REGINFO
|
|
|
|
#if !defined(CONFIG_SYS_RAMBOOT)
|
|
#define CONFIG_CMD_ELF
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#define CONFIG_CMD_PCI
|
|
#endif
|
|
|
|
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
|
|
#define CONFIG_CMD_MII
|
|
#endif
|
|
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "GPPP=> " /* Monitor Command Prompt */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#endif
|
|
|
|
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_HAS_ETH2
|
|
#endif
|
|
|
|
#define CONFIG_SERVERIP 192.168.85.1
|
|
#define CONFIG_IPADDR 192.168.85.60
|
|
#define CONFIG_GATEWAYIP 192.168.85.1
|
|
#define CONFIG_NETMASK 255.255.255.0
|
|
#define CONFIG_HOSTNAME STX_GP3
|
|
#define CONFIG_ROOTPATH "/gppproot"
|
|
#define CONFIG_BOOTFILE "uImage"
|
|
#define CONFIG_LOADADDR 0x1000000
|
|
|
|
#endif /* __CONFIG_H */
|