mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 16:38:53 +09:00
![Heiko Schocher](/assets/img/avatar_default.png)
add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU. The bootcounter uses 8 bytes from the muram, because no other memory was found on this CPU for the bootcount feature. So we must correct the muram size in DTS before booting Linux. This feature is actual only implemented for MPC8360, because not all 83xx CPU have qe, and therefore no muram, which this feature uses. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
436 lines
10 KiB
C
436 lines
10 KiB
C
/*
|
|
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* CPU specific code for the MPC83xx family.
|
|
*
|
|
* Derived from the MPC8260 and MPC85xx.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <command.h>
|
|
#include <mpc83xx.h>
|
|
#include <asm/processor.h>
|
|
#include <libfdt.h>
|
|
#include <tsec.h>
|
|
#include <netdev.h>
|
|
#include <fsl_esdhc.h>
|
|
#ifdef CONFIG_BOOTCOUNT_LIMIT
|
|
#include <asm/immap_qe.h>
|
|
#include <asm/io.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int checkcpu(void)
|
|
{
|
|
volatile immap_t *immr;
|
|
ulong clock = gd->cpu_clk;
|
|
u32 pvr = get_pvr();
|
|
u32 spridr;
|
|
char buf[32];
|
|
int i;
|
|
|
|
const struct cpu_type {
|
|
char name[15];
|
|
u32 partid;
|
|
} cpu_type_list [] = {
|
|
CPU_TYPE_ENTRY(8311),
|
|
CPU_TYPE_ENTRY(8313),
|
|
CPU_TYPE_ENTRY(8314),
|
|
CPU_TYPE_ENTRY(8315),
|
|
CPU_TYPE_ENTRY(8321),
|
|
CPU_TYPE_ENTRY(8323),
|
|
CPU_TYPE_ENTRY(8343),
|
|
CPU_TYPE_ENTRY(8347_TBGA_),
|
|
CPU_TYPE_ENTRY(8347_PBGA_),
|
|
CPU_TYPE_ENTRY(8349),
|
|
CPU_TYPE_ENTRY(8358_TBGA_),
|
|
CPU_TYPE_ENTRY(8358_PBGA_),
|
|
CPU_TYPE_ENTRY(8360),
|
|
CPU_TYPE_ENTRY(8377),
|
|
CPU_TYPE_ENTRY(8378),
|
|
CPU_TYPE_ENTRY(8379),
|
|
};
|
|
|
|
immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
|
|
puts("CPU: ");
|
|
|
|
switch (pvr & 0xffff0000) {
|
|
case PVR_E300C1:
|
|
printf("e300c1, ");
|
|
break;
|
|
|
|
case PVR_E300C2:
|
|
printf("e300c2, ");
|
|
break;
|
|
|
|
case PVR_E300C3:
|
|
printf("e300c3, ");
|
|
break;
|
|
|
|
case PVR_E300C4:
|
|
printf("e300c4, ");
|
|
break;
|
|
|
|
default:
|
|
printf("Unknown core, ");
|
|
}
|
|
|
|
spridr = immr->sysconf.spridr;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
|
|
if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) {
|
|
puts("MPC");
|
|
puts(cpu_type_list[i].name);
|
|
if (IS_E_PROCESSOR(spridr))
|
|
puts("E");
|
|
if (REVID_MAJOR(spridr) >= 2)
|
|
puts("A");
|
|
printf(", Rev: %d.%d", REVID_MAJOR(spridr),
|
|
REVID_MINOR(spridr));
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(cpu_type_list))
|
|
printf("(SPRIDR %08x unknown), ", spridr);
|
|
|
|
printf(" at %s MHz, ", strmhz(buf, clock));
|
|
|
|
printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Program a UPM with the code supplied in the table.
|
|
*
|
|
* The 'dummy' variable is used to increment the MAD. 'dummy' is
|
|
* supposed to be a pointer to the memory of the device being
|
|
* programmed by the UPM. The data in the MDR is written into
|
|
* memory and the MAD is incremented every time there's a write
|
|
* to 'dummy'. Unfortunately, the current prototype for this
|
|
* function doesn't allow for passing the address of this
|
|
* device, and changing the prototype will break a number lots
|
|
* of other code, so we need to use a round-about way of finding
|
|
* the value for 'dummy'.
|
|
*
|
|
* The value can be extracted from the base address bits of the
|
|
* Base Register (BR) associated with the specific UPM. To find
|
|
* that BR, we need to scan all 8 BRs until we find the one that
|
|
* has its MSEL bits matching the UPM we want. Once we know the
|
|
* right BR, we can extract the base address bits from it.
|
|
*
|
|
* The MxMR and the BR and OR of the chosen bank should all be
|
|
* configured before calling this function.
|
|
*
|
|
* Parameters:
|
|
* upm: 0=UPMA, 1=UPMB, 2=UPMC
|
|
* table: Pointer to an array of values to program
|
|
* size: Number of elements in the array. Must be 64 or less.
|
|
*/
|
|
void upmconfig (uint upm, uint *table, uint size)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile fsl_lbus_t *lbus = &immap->lbus;
|
|
volatile uchar *dummy = NULL;
|
|
const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */
|
|
volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */
|
|
uint i;
|
|
|
|
/* Scan all the banks to determine the base address of the device */
|
|
for (i = 0; i < 8; i++) {
|
|
if ((lbus->bank[i].br & BR_MSEL) == msel) {
|
|
dummy = (uchar *) (lbus->bank[i].br & BR_BA);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!dummy) {
|
|
printf("Error: %s() could not find matching BR\n", __FUNCTION__);
|
|
hang();
|
|
}
|
|
|
|
/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
|
|
*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
lbus->mdr = table[i];
|
|
__asm__ __volatile__ ("sync");
|
|
*dummy = 0; /* Write the value to memory and increment MAD */
|
|
__asm__ __volatile__ ("sync");
|
|
while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
|
|
}
|
|
|
|
/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
|
|
*mxmr &= 0xCFFFFFC0;
|
|
}
|
|
|
|
|
|
int
|
|
do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
ulong msr;
|
|
#ifndef MPC83xx_RESET
|
|
ulong addr;
|
|
#endif
|
|
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
#ifdef MPC83xx_RESET
|
|
/* Interrupts and MMU off */
|
|
__asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
|
|
|
|
msr &= ~( MSR_EE | MSR_IR | MSR_DR);
|
|
__asm__ __volatile__ ("mtmsr %0"::"r" (msr));
|
|
|
|
/* enable Reset Control Reg */
|
|
immap->reset.rpr = 0x52535445;
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("isync");
|
|
|
|
/* confirm Reset Control Reg is enabled */
|
|
while(!((immap->reset.rcer) & RCER_CRE));
|
|
|
|
printf("Resetting the board.");
|
|
printf("\n");
|
|
|
|
udelay(200);
|
|
|
|
/* perform reset, only one bit */
|
|
immap->reset.rcr = RCR_SWHR;
|
|
|
|
#else /* ! MPC83xx_RESET */
|
|
|
|
immap->reset.rmr = RMR_CSRE; /* Checkstop Reset enable */
|
|
|
|
/* Interrupts and MMU off */
|
|
__asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
|
|
|
|
msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
|
|
__asm__ __volatile__ ("mtmsr %0"::"r" (msr));
|
|
|
|
/*
|
|
* Trying to execute the next instruction at a non-existing address
|
|
* should cause a machine check, resulting in reset
|
|
*/
|
|
addr = CONFIG_SYS_RESET_ADDRESS;
|
|
|
|
printf("resetting the board.");
|
|
printf("\n");
|
|
((void (*)(void)) addr) ();
|
|
#endif /* MPC83xx_RESET */
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* Get timebase clock frequency (like cpu_clk in Hz)
|
|
*/
|
|
|
|
unsigned long get_tbclk(void)
|
|
{
|
|
ulong tbclk;
|
|
|
|
tbclk = (gd->bus_clk + 3L) / 4L;
|
|
|
|
return tbclk;
|
|
}
|
|
|
|
|
|
#if defined(CONFIG_WATCHDOG)
|
|
void watchdog_reset (void)
|
|
{
|
|
int re_enable = disable_interrupts();
|
|
|
|
/* Reset the 83xx watchdog */
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
immr->wdt.swsrr = 0x556c;
|
|
immr->wdt.swsrr = 0xaa39;
|
|
|
|
if (re_enable)
|
|
enable_interrupts ();
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC)
|
|
void dma_init(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
|
|
volatile dma83xx_t *dma = &immap->dma;
|
|
volatile u32 status = swab32(dma->dmasr0);
|
|
volatile u32 dmamr0 = swab32(dma->dmamr0);
|
|
|
|
debug("DMA-init\n");
|
|
|
|
/* initialize DMASARn, DMADAR and DMAABCRn */
|
|
dma->dmadar0 = (u32)0;
|
|
dma->dmasar0 = (u32)0;
|
|
dma->dmabcr0 = 0;
|
|
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("isync");
|
|
|
|
/* clear CS bit */
|
|
dmamr0 &= ~DMA_CHANNEL_START;
|
|
dma->dmamr0 = swab32(dmamr0);
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("isync");
|
|
|
|
/* while the channel is busy, spin */
|
|
while(status & DMA_CHANNEL_BUSY) {
|
|
status = swab32(dma->dmasr0);
|
|
}
|
|
|
|
debug("DMA-init end\n");
|
|
}
|
|
|
|
uint dma_check(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
|
|
volatile dma83xx_t *dma = &immap->dma;
|
|
volatile u32 status = swab32(dma->dmasr0);
|
|
volatile u32 byte_count = swab32(dma->dmabcr0);
|
|
|
|
/* while the channel is busy, spin */
|
|
while (status & DMA_CHANNEL_BUSY) {
|
|
status = swab32(dma->dmasr0);
|
|
}
|
|
|
|
if (status & DMA_CHANNEL_TRANSFER_ERROR) {
|
|
printf ("DMA Error: status = %x @ %d\n", status, byte_count);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
int dma_xfer(void *dest, u32 count, void *src)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
|
|
volatile dma83xx_t *dma = &immap->dma;
|
|
volatile u32 dmamr0;
|
|
|
|
/* initialize DMASARn, DMADAR and DMAABCRn */
|
|
dma->dmadar0 = swab32((u32)dest);
|
|
dma->dmasar0 = swab32((u32)src);
|
|
dma->dmabcr0 = swab32(count);
|
|
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("isync");
|
|
|
|
/* init direct transfer, clear CS bit */
|
|
dmamr0 = (DMA_CHANNEL_TRANSFER_MODE_DIRECT |
|
|
DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B |
|
|
DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN);
|
|
|
|
dma->dmamr0 = swab32(dmamr0);
|
|
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("isync");
|
|
|
|
/* set CS to start DMA transfer */
|
|
dmamr0 |= DMA_CHANNEL_START;
|
|
dma->dmamr0 = swab32(dmamr0);
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("isync");
|
|
|
|
return ((int)dma_check());
|
|
}
|
|
#endif /*CONFIG_DDR_ECC*/
|
|
|
|
/*
|
|
* Initializes on-chip ethernet controllers.
|
|
* to override, implement board_eth_init()
|
|
*/
|
|
int cpu_eth_init(bd_t *bis)
|
|
{
|
|
#if defined(CONFIG_UEC_ETH1)
|
|
uec_initialize(0);
|
|
#endif
|
|
#if defined(CONFIG_UEC_ETH2)
|
|
uec_initialize(1);
|
|
#endif
|
|
#if defined(CONFIG_UEC_ETH3)
|
|
uec_initialize(2);
|
|
#endif
|
|
#if defined(CONFIG_UEC_ETH4)
|
|
uec_initialize(3);
|
|
#endif
|
|
#if defined(CONFIG_UEC_ETH5)
|
|
uec_initialize(4);
|
|
#endif
|
|
#if defined(CONFIG_UEC_ETH6)
|
|
uec_initialize(5);
|
|
#endif
|
|
#if defined(CONFIG_TSEC_ENET)
|
|
tsec_standard_init(bis);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initializes on-chip MMC controllers.
|
|
* to override, implement board_mmc_init()
|
|
*/
|
|
int cpu_mmc_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
return fsl_esdhc_mmc_init(bis);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_BOOTCOUNT_LIMIT
|
|
|
|
#if !defined(CONFIG_MPC8360)
|
|
#error "CONFIG_BOOTCOUNT_LIMIT only for MPC8360 implemented"
|
|
#endif
|
|
|
|
#if !defined(CONFIG_BOOTCOUNT_ADDR)
|
|
#define CONFIG_BOOTCOUNT_ADDR (0x110000 + QE_MURAM_SIZE - 2 * sizeof(unsigned long))
|
|
#endif
|
|
|
|
#include <asm/io.h>
|
|
|
|
void bootcount_store (ulong a)
|
|
{
|
|
void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
|
|
out_be32 (reg, a);
|
|
out_be32 (reg + 4, BOOTCOUNT_MAGIC);
|
|
}
|
|
|
|
ulong bootcount_load (void)
|
|
{
|
|
void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
|
|
|
|
if (in_be32 (reg + 4) != BOOTCOUNT_MAGIC)
|
|
return 0;
|
|
else
|
|
return in_be32 (reg);
|
|
}
|
|
#endif /* CONFIG_BOOTCOUNT_LIMIT */
|