mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
![Suman Anna](/assets/img/avatar_default.png)
Add support to boot some remoteprocs at U-boot prompt on the J721E EVM boards by using the 'boot_rprocs' and other env variables defined in the common environment file k3_rproc.h, and updating the 'DEFAULT_RPROCS' macro. The list of R5F cores to be started before loading and booting the Linux kernel are as follows, and in this order: Main R5FSS0 (Split) Core1 : 3 /lib/firmware/j7-main-r5f0_1-fw Main R5FSS1 (LockStep) : 4 /lib/firmware/j7-main-r5f1_0-fw The MCU R5FSS0 and Main R5FSS1 are currently in LockStep mode, so the equivalent Core1 rprocs (rproc #1 and #5) are not included. The Main R5FSS0 Core0 (rproc #2) is already started by R5 SPL, so is not included in the list either. The DSP cores are started in the following order before loading and booting the Linux kernel: C66_0: 6 /lib/firmware/j7-c66_0-fw C66_1: 7 /lib/firmware/j7-c66_1-fw C71_0: 8 /lib/firmware/j7-c71_0-fw The order of the rprocs to boot can be changed at runtime if desired by overwriting the 'rproc_fw_binaries' environment variable at U-boot prompt. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
112 lines
3.6 KiB
C
112 lines
3.6 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuration header file for K3 J721E EVM
|
|
*
|
|
* Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Lokesh Vutla <lokeshvutla@ti.com>
|
|
*/
|
|
|
|
#ifndef __CONFIG_J721E_EVM_H
|
|
#define __CONFIG_J721E_EVM_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <config_distro_bootcmd.h>
|
|
#include <environment/ti/mmc.h>
|
|
#include <environment/ti/k3_rproc.h>
|
|
|
|
#define CONFIG_ENV_SIZE (128 << 10)
|
|
|
|
/* DDR Configuration */
|
|
#define CONFIG_SYS_SDRAM_BASE1 0x880000000
|
|
|
|
/* SPL Loader Configuration */
|
|
#ifdef CONFIG_TARGET_J721E_A72_EVM
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + \
|
|
CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
|
|
#else
|
|
/*
|
|
* Maximum size in memory allocated to the SPL BSS. Keep it as tight as
|
|
* possible (to allow the build to go through), as this directly affects
|
|
* our memory footprint. The less we use for BSS the more we have available
|
|
* for everything else.
|
|
*/
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0xA000
|
|
/*
|
|
* Link BSS to be within SPL in a dedicated region located near the top of
|
|
* the MCU SRAM, this way making it available also before relocation. Note
|
|
* that we are not using the actual top of the MCU SRAM as there is a memory
|
|
* location filled in by the boot ROM that we want to read out without any
|
|
* interference from the C context.
|
|
*/
|
|
#define CONFIG_SPL_BSS_START_ADDR (CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX -\
|
|
CONFIG_SPL_BSS_MAX_SIZE)
|
|
/* Set the stack right below the SPL BSS section */
|
|
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_BSS_START_ADDR
|
|
/* Configure R5 SPL post-relocation malloc pool in DDR */
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x84000000
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_K3_SPL_ATF
|
|
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
|
|
#endif
|
|
|
|
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_64M
|
|
#define CONFIG_CQSPI_REF_CLK 133333333
|
|
|
|
/* U-Boot general configuration */
|
|
#define EXTRA_ENV_J721E_BOARD_SETTINGS \
|
|
"default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
|
|
"findfdt=setenv fdtfile ${default_device_tree}\0" \
|
|
"loadaddr=0x80080000\0" \
|
|
"fdtaddr=0x82000000\0" \
|
|
"overlayaddr=0x83000000\0" \
|
|
"name_kern=Image\0" \
|
|
"console=ttyS2,115200n8\0" \
|
|
"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000\0" \
|
|
"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
|
|
|
|
/* U-Boot MMC-specific configuration */
|
|
#define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \
|
|
"boot=mmc\0" \
|
|
"mmcdev=1\0" \
|
|
"bootpart=1:2\0" \
|
|
"bootdir=/boot\0" \
|
|
"rd_spec=-\0" \
|
|
"init_mmc=run args_all args_mmc\0" \
|
|
"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
|
|
"get_overlay_mmc=" \
|
|
"fdt address ${fdtaddr};" \
|
|
"fdt resize 0x100000;" \
|
|
"for overlay in $name_overlays;" \
|
|
"do;" \
|
|
"load mmc ${bootpart} ${overlayaddr} ${bootdir}/${overlay} && " \
|
|
"fdt apply ${overlayaddr};" \
|
|
"done;\0" \
|
|
"get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
|
|
"${bootdir}/${name_kern}\0"
|
|
|
|
#ifdef DEFAULT_RPROCS
|
|
#undef DEFAULT_RPROCS
|
|
#endif
|
|
#define DEFAULT_RPROCS "" \
|
|
"3 /lib/firmware/j7-main-r5f0_1-fw " \
|
|
"4 /lib/firmware/j7-main-r5f1_0-fw " \
|
|
"6 /lib/firmware/j7-c66_0-fw " \
|
|
"7 /lib/firmware/j7-c66_1-fw " \
|
|
"8 /lib/firmware/j7-c71_0-fw "
|
|
|
|
/* Incorporate settings into the U-Boot environment */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
DEFAULT_MMC_TI_ARGS \
|
|
EXTRA_ENV_J721E_BOARD_SETTINGS \
|
|
EXTRA_ENV_J721E_BOARD_SETTINGS_MMC \
|
|
EXTRA_ENV_RPROC_SETTINGS
|
|
|
|
/* Now for the remaining common defines */
|
|
#include <configs/ti_armv7_common.h>
|
|
|
|
#endif /* __CONFIG_J721E_EVM_H */
|