mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-13 22:56:17 +09:00
e3b9c98a23
Update this driver to support driver model. As all MVEBU boards using
this driver are converted with this patch, the non-driver-model code
can be removed completely. This is also the reason why this patch
is quite big and includes a) the driver change and b) the
platform change. As its not git-bisect save otherwise.
With this conversion, some parameters are now extracted from the
DT instread of using the config header defines. The supported
properties right now are:
PHY-mode ("phy-mode") and PHY-address ("reg").
The base addresses for the ethernet controllers can be removed from
the header files as well.
Please note that this patch also removes the E1000 network driver
from some MVEBU config headers. This is necessary, as with DM_ETH
configured and the e1000 driver enabled, the PCI driver also needs
to support DM. But the MVEBU PCI(e) driver still needs to get
ported to DM. When this is done, the E1000 driver can be enabled
again.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Simon Glass <sjg@chromium.org>
98 lines
3.1 KiB
C
98 lines
3.1 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* Header file for the Marvell's Feroceon CPU core.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _MVEBU_SOC_H
|
|
#define _MVEBU_SOC_H
|
|
|
|
#define SOC_MV78460_ID 0x7846
|
|
#define SOC_88F6810_ID 0x6810
|
|
#define SOC_88F6820_ID 0x6820
|
|
#define SOC_88F6828_ID 0x6828
|
|
|
|
/* A38x revisions */
|
|
#define MV_88F68XX_Z1_ID 0x0
|
|
#define MV_88F68XX_A0_ID 0x4
|
|
|
|
/* TCLK Core Clock definition */
|
|
#ifndef CONFIG_SYS_TCLK
|
|
#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
|
|
#endif
|
|
|
|
/* Armada XP PLL frequency (used for NAND clock generation) */
|
|
#define CONFIG_SYS_MVEBU_PLL_CLOCK 2000000000
|
|
|
|
/* SOC specific definations */
|
|
#define INTREG_BASE 0xd0000000
|
|
#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080)
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/*
|
|
* On A38x switching the regs base address without running from
|
|
* SDRAM doesn't seem to work. So let the SPL still use the
|
|
* default base address and switch to the new address in the
|
|
* main u-boot later.
|
|
*/
|
|
#define SOC_REGS_PHY_BASE 0xd0000000
|
|
#else
|
|
#define SOC_REGS_PHY_BASE 0xf1000000
|
|
#endif
|
|
#define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x)
|
|
|
|
#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504))
|
|
#define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000))
|
|
#define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE
|
|
#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000))
|
|
#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000))
|
|
#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100))
|
|
#define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140))
|
|
#define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180))
|
|
#define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200))
|
|
#define MVEBU_CLOCK_BASE (MVEBU_REGISTER(0x18700))
|
|
#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000))
|
|
#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180))
|
|
#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300))
|
|
#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000))
|
|
#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000))
|
|
#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000))
|
|
#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000))
|
|
#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000))
|
|
#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000))
|
|
#define MVEBU_SDIO_BASE (MVEBU_REGISTER(0xd8000))
|
|
|
|
#define SOC_COHERENCY_FABRIC_CTRL_REG (MVEBU_REGISTER(0x20200))
|
|
#define MBUS_ERR_PROP_EN (1 << 8)
|
|
|
|
#define MBUS_BRIDGE_WIN_CTRL_REG (MVEBU_REGISTER(0x20250))
|
|
#define MBUS_BRIDGE_WIN_BASE_REG (MVEBU_REGISTER(0x20254))
|
|
|
|
#define MVEBU_SOC_DEV_MUX_REG (MVEBU_SYSTEM_REG_BASE + 0x08)
|
|
#define NAND_EN BIT(0)
|
|
#define NAND_ARBITER_EN BIT(27)
|
|
|
|
#define ARMADA_XP_PUP_ENABLE (MVEBU_SYSTEM_REG_BASE + 0x44c)
|
|
#define GE0_PUP_EN BIT(0)
|
|
#define GE1_PUP_EN BIT(1)
|
|
#define LCD_PUP_EN BIT(2)
|
|
#define NAND_PUP_EN BIT(4)
|
|
#define SPI_PUP_EN BIT(5)
|
|
|
|
#define MVEBU_CORE_DIV_CLK_CTRL(i) (MVEBU_CLOCK_BASE + ((i) * 0x8))
|
|
#define NAND_ECC_DIVCKL_RATIO_OFFS 8
|
|
#define NAND_ECC_DIVCKL_RATIO_MASK (0x3F << NAND_ECC_DIVCKL_RATIO_OFFS)
|
|
|
|
#define SDRAM_MAX_CS 4
|
|
#define SDRAM_ADDR_MASK 0xFF000000
|
|
|
|
/* MVEBU CPU memory windows */
|
|
#define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA
|
|
#define MVCPU_WIN_ENABLE CPU_WIN_ENABLE
|
|
#define MVCPU_WIN_DISABLE CPU_WIN_DISABLE
|
|
|
|
#endif /* _MVEBU_SOC_H */
|