mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![]() In early MMU table, DDR has to be mapped as device memory to avoid speculative access. After DDR is initialized, it needs to be updated to normal memory to allow code execution. To simplify the code, dram_init() is moved into a common file as a weak function. Signed-off-by: York Sun <york.sun@nxp.com> |
||
---|---|---|
.. | ||
Kconfig | ||
ls1012aqds_qixis.h | ||
ls1012aqds.c | ||
MAINTAINERS | ||
Makefile | ||
README |
Overview -------- QorIQ LS1012A Development System (LS1012AQDS) is a high-performance development platform, with a complete debugging environment. The LS1012AQDS board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LS1012A SoC Overview -------------------- Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1012A SoC overview. LS1012AQDS board Overview ----------------------- - SERDES Connections, 4 lanes supporting: - PCI Express - 3.0 - SGMII, SGMII 2.5 - SATA 3.0 - DDR Controller - 16-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s - QSPI Controller - A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select signals to QSPI NOR flash memory (2 virtual banks) and the QSPI emulator - USB 3.0 - One USB 3.0 controller with integrated PHY - One high-speed USB 3.0 port - USB 2.0 - One USB 2.0 controller with ULPI interface - Two enhanced secure digital host controllers: - SDHC1 controller can be connected to onboard SDHC connector - SDHC2 controller: 1-/4-bit SD/MMC card supporting 1.8 V devices - 2 I2C controllers - One SATA onboard connectors - UART - 5 SAI - One SAI port with audio codec SGTL5000: • Provides MIC bias • Provides headphone and line output - One SAI port terminated at 2x6 header - Three SAI Tx/Rx ports terminated at 2x3 headers - ARM JTAG support Booting Options --------------- a) QSPI Flash Emu Boot b) QSPI Flash 1 c) QSPI Flash 2 QSPI flash map -------------- Images | Size |QSPI Flash Address ------------------------------------------ RCW + PBI | 1MB | 0x4000_0000 U-boot | 1MB | 0x4010_0000 U-boot Env | 1MB | 0x4020_0000 PPA FIT image | 2MB | 0x4050_0000 Linux ITB | ~53MB | 0x40A0_0000