u-boot-brain/include/acpi/acpi_table.h

706 lines
17 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Helpers for ACPI table generation
*
* Based on acpi.c from coreboot
*
* Copyright 2019 Google LLC
*
* Copyright (C) 2015, Saket Sinha <saket.sinha89@gmail.com>
* Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
*/
#ifndef __ACPI_TABLE_H__
#define __ACPI_TABLE_H__
#include <dm/acpi.h>
#define RSDP_SIG "RSD PTR " /* RSDP pointer signature */
#define OEM_ID "U-BOOT" /* U-Boot */
#define OEM_TABLE_ID "U-BOOTBL" /* U-Boot Table */
#define ASLC_ID "INTL" /* Intel ASL Compiler */
/* TODO(sjg@chromium.org): Figure out how to get compiler revision */
#define ASL_REVISION 0
#define ACPI_RSDP_REV_ACPI_1_0 0
#define ACPI_RSDP_REV_ACPI_2_0 2
#if !defined(__ACPI__)
#include <linux/bitops.h>
struct acpi_ctx;
/*
* RSDP (Root System Description Pointer)
* Note: ACPI 1.0 didn't have length, xsdt_address, and ext_checksum
*/
struct acpi_rsdp {
char signature[8]; /* RSDP signature */
u8 checksum; /* Checksum of the first 20 bytes */
char oem_id[6]; /* OEM ID */
u8 revision; /* 0 for ACPI 1.0, others 2 */
u32 rsdt_address; /* Physical address of RSDT (32 bits) */
u32 length; /* Total RSDP length (incl. extended part) */
u64 xsdt_address; /* Physical address of XSDT (64 bits) */
u8 ext_checksum; /* Checksum of the whole table */
u8 reserved[3];
};
/* Generic ACPI header, provided by (almost) all tables */
struct __packed acpi_table_header {
char signature[ACPI_NAME_LEN]; /* ACPI signature (4 ASCII chars) */
u32 length; /* Table length in bytes (incl. header) */
u8 revision; /* Table version (not ACPI version!) */
volatile u8 checksum; /* To make sum of entire table == 0 */
char oem_id[6]; /* OEM identification */
char oem_table_id[8]; /* OEM table identification */
u32 oem_revision; /* OEM revision number */
char aslc_id[4]; /* ASL compiler vendor ID */
u32 aslc_revision; /* ASL compiler revision number */
};
struct acpi_gen_regaddr {
u8 space_id; /* Address space ID */
u8 bit_width; /* Register size in bits */
u8 bit_offset; /* Register bit offset */
u8 access_size; /* Access size */
u32 addrl; /* Register address, low 32 bits */
u32 addrh; /* Register address, high 32 bits */
};
/* A maximum number of 32 ACPI tables ought to be enough for now */
#define MAX_ACPI_TABLES 32
/* RSDT (Root System Description Table) */
struct acpi_rsdt {
struct acpi_table_header header;
u32 entry[MAX_ACPI_TABLES];
};
/* XSDT (Extended System Description Table) */
struct acpi_xsdt {
struct acpi_table_header header;
u64 entry[MAX_ACPI_TABLES];
};
/* HPET timers */
struct __packed acpi_hpet {
struct acpi_table_header header;
u32 id;
struct acpi_gen_regaddr addr;
u8 number;
u16 min_tick;
u8 attributes;
};
struct __packed acpi_tpm2 {
struct acpi_table_header header;
u16 platform_class;
u8 reserved[2];
u64 control_area;
u32 start_method;
u8 msp[12];
u32 laml;
u64 lasa;
};
struct __packed acpi_tcpa {
struct acpi_table_header header;
u16 platform_class;
u32 laml;
u64 lasa;
};
/* FADT Preferred Power Management Profile */
enum acpi_pm_profile {
ACPI_PM_UNSPECIFIED = 0,
ACPI_PM_DESKTOP,
ACPI_PM_MOBILE,
ACPI_PM_WORKSTATION,
ACPI_PM_ENTERPRISE_SERVER,
ACPI_PM_SOHO_SERVER,
ACPI_PM_APPLIANCE_PC,
ACPI_PM_PERFORMANCE_SERVER,
ACPI_PM_TABLET
};
/* FADT flags for p_lvl2_lat and p_lvl3_lat */
#define ACPI_FADT_C2_NOT_SUPPORTED 101
#define ACPI_FADT_C3_NOT_SUPPORTED 1001
/* FADT Boot Architecture Flags */
#define ACPI_FADT_LEGACY_FREE 0x00
#define ACPI_FADT_LEGACY_DEVICES BIT(0)
#define ACPI_FADT_8042 BIT(1)
#define ACPI_FADT_VGA_NOT_PRESENT BIT(2)
#define ACPI_FADT_MSI_NOT_SUPPORTED BIT(3)
#define ACPI_FADT_NO_PCIE_ASPM_CONTROL BIT(4)
/* FADT Feature Flags */
#define ACPI_FADT_WBINVD BIT(0)
#define ACPI_FADT_WBINVD_FLUSH BIT(1)
#define ACPI_FADT_C1_SUPPORTED BIT(2)
#define ACPI_FADT_C2_MP_SUPPORTED BIT(3)
#define ACPI_FADT_POWER_BUTTON BIT(4)
#define ACPI_FADT_SLEEP_BUTTON BIT(5)
#define ACPI_FADT_FIXED_RTC BIT(6)
#define ACPI_FADT_S4_RTC_WAKE BIT(7)
#define ACPI_FADT_32BIT_TIMER BIT(8)
#define ACPI_FADT_DOCKING_SUPPORTED BIT(9)
#define ACPI_FADT_RESET_REGISTER BIT(10)
#define ACPI_FADT_SEALED_CASE BIT(11)
#define ACPI_FADT_HEADLESS BIT(12)
#define ACPI_FADT_SLEEP_TYPE BIT(13)
#define ACPI_FADT_PCI_EXPRESS_WAKE BIT(14)
#define ACPI_FADT_PLATFORM_CLOCK BIT(15)
#define ACPI_FADT_S4_RTC_VALID BIT(16)
#define ACPI_FADT_REMOTE_POWER_ON BIT(17)
#define ACPI_FADT_APIC_CLUSTER BIT(18)
#define ACPI_FADT_APIC_PHYSICAL BIT(19)
#define ACPI_FADT_HW_REDUCED_ACPI BIT(20)
#define ACPI_FADT_LOW_PWR_IDLE_S0 BIT(21)
enum acpi_address_space_type {
ACPI_ADDRESS_SPACE_MEMORY = 0, /* System memory */
ACPI_ADDRESS_SPACE_IO, /* System I/O */
ACPI_ADDRESS_SPACE_PCI, /* PCI config space */
ACPI_ADDRESS_SPACE_EC, /* Embedded controller */
ACPI_ADDRESS_SPACE_SMBUS, /* SMBus */
ACPI_ADDRESS_SPACE_PCC = 0x0a, /* Platform Comm. Channel */
ACPI_ADDRESS_SPACE_FIXED = 0x7f /* Functional fixed hardware */
};
enum acpi_address_space_size {
ACPI_ACCESS_SIZE_UNDEFINED = 0,
ACPI_ACCESS_SIZE_BYTE_ACCESS,
ACPI_ACCESS_SIZE_WORD_ACCESS,
ACPI_ACCESS_SIZE_DWORD_ACCESS,
ACPI_ACCESS_SIZE_QWORD_ACCESS
};
/* FADT (Fixed ACPI Description Table) */
struct __packed acpi_fadt {
struct acpi_table_header header;
u32 firmware_ctrl;
u32 dsdt;
u8 res1;
u8 preferred_pm_profile;
u16 sci_int;
u32 smi_cmd;
u8 acpi_enable;
u8 acpi_disable;
u8 s4bios_req;
u8 pstate_cnt;
u32 pm1a_evt_blk;
u32 pm1b_evt_blk;
u32 pm1a_cnt_blk;
u32 pm1b_cnt_blk;
u32 pm2_cnt_blk;
u32 pm_tmr_blk;
u32 gpe0_blk;
u32 gpe1_blk;
u8 pm1_evt_len;
u8 pm1_cnt_len;
u8 pm2_cnt_len;
u8 pm_tmr_len;
u8 gpe0_blk_len;
u8 gpe1_blk_len;
u8 gpe1_base;
u8 cst_cnt;
u16 p_lvl2_lat;
u16 p_lvl3_lat;
u16 flush_size;
u16 flush_stride;
u8 duty_offset;
u8 duty_width;
u8 day_alrm;
u8 mon_alrm;
u8 century;
u16 iapc_boot_arch;
u8 res2;
u32 flags;
struct acpi_gen_regaddr reset_reg;
u8 reset_value;
u16 arm_boot_arch;
u8 minor_revision;
u32 x_firmware_ctl_l;
u32 x_firmware_ctl_h;
u32 x_dsdt_l;
u32 x_dsdt_h;
struct acpi_gen_regaddr x_pm1a_evt_blk;
struct acpi_gen_regaddr x_pm1b_evt_blk;
struct acpi_gen_regaddr x_pm1a_cnt_blk;
struct acpi_gen_regaddr x_pm1b_cnt_blk;
struct acpi_gen_regaddr x_pm2_cnt_blk;
struct acpi_gen_regaddr x_pm_tmr_blk;
struct acpi_gen_regaddr x_gpe0_blk;
struct acpi_gen_regaddr x_gpe1_blk;
};
/* FADT TABLE Revision values - note these do not match the ACPI revision */
#define ACPI_FADT_REV_ACPI_1_0 1
#define ACPI_FADT_REV_ACPI_2_0 3
#define ACPI_FADT_REV_ACPI_3_0 4
#define ACPI_FADT_REV_ACPI_4_0 4
#define ACPI_FADT_REV_ACPI_5_0 5
#define ACPI_FADT_REV_ACPI_6_0 6
/* MADT TABLE Revision values - note these do not match the ACPI revision */
#define ACPI_MADT_REV_ACPI_3_0 2
#define ACPI_MADT_REV_ACPI_4_0 3
#define ACPI_MADT_REV_ACPI_5_0 3
#define ACPI_MADT_REV_ACPI_6_0 5
#define ACPI_MCFG_REV_ACPI_3_0 1
/* IVRS Revision Field */
#define IVRS_FORMAT_FIXED 0x01 /* Type 10h & 11h only */
#define IVRS_FORMAT_MIXED 0x02 /* Type 10h, 11h, & 40h */
/* FACS flags */
#define ACPI_FACS_S4BIOS_F BIT(0)
#define ACPI_FACS_64BIT_WAKE_F BIT(1)
/* FACS (Firmware ACPI Control Structure) */
struct acpi_facs {
char signature[ACPI_NAME_LEN]; /* "FACS" */
u32 length; /* Length in bytes (>= 64) */
u32 hardware_signature; /* Hardware signature */
u32 firmware_waking_vector; /* Firmware waking vector */
u32 global_lock; /* Global lock */
u32 flags; /* FACS flags */
u32 x_firmware_waking_vector_l; /* X FW waking vector, low */
u32 x_firmware_waking_vector_h; /* X FW waking vector, high */
u8 version; /* Version 2 */
u8 res1[3];
u32 ospm_flags; /* OSPM enabled flags */
u8 res2[24];
};
/* MADT flags */
#define ACPI_MADT_PCAT_COMPAT BIT(0)
/* MADT (Multiple APIC Description Table) */
struct acpi_madt {
struct acpi_table_header header;
u32 lapic_addr; /* Local APIC address */
u32 flags; /* Multiple APIC flags */
};
/* MADT: APIC Structure Type*/
enum acpi_apic_types {
ACPI_APIC_LAPIC = 0, /* Processor local APIC */
ACPI_APIC_IOAPIC, /* I/O APIC */
ACPI_APIC_IRQ_SRC_OVERRIDE, /* Interrupt source override */
ACPI_APIC_NMI_SRC, /* NMI source */
ACPI_APIC_LAPIC_NMI, /* Local APIC NMI */
ACPI_APIC_LAPIC_ADDR_OVERRIDE, /* Local APIC address override */
ACPI_APIC_IOSAPIC, /* I/O SAPIC */
ACPI_APIC_LSAPIC, /* Local SAPIC */
ACPI_APIC_PLATFORM_IRQ_SRC, /* Platform interrupt sources */
ACPI_APIC_LX2APIC, /* Processor local x2APIC */
ACPI_APIC_LX2APIC_NMI, /* Local x2APIC NMI */
};
/* MADT: Processor Local APIC Structure */
#define LOCAL_APIC_FLAG_ENABLED BIT(0)
struct acpi_madt_lapic {
u8 type; /* Type (0) */
u8 length; /* Length in bytes (8) */
u8 processor_id; /* ACPI processor ID */
u8 apic_id; /* Local APIC ID */
u32 flags; /* Local APIC flags */
};
/* MADT: I/O APIC Structure */
struct acpi_madt_ioapic {
u8 type; /* Type (1) */
u8 length; /* Length in bytes (12) */
u8 ioapic_id; /* I/O APIC ID */
u8 reserved;
u32 ioapic_addr; /* I/O APIC address */
u32 gsi_base; /* Global system interrupt base */
};
/* MADT: Interrupt Source Override Structure */
struct __packed acpi_madt_irqoverride {
u8 type; /* Type (2) */
u8 length; /* Length in bytes (10) */
u8 bus; /* ISA (0) */
u8 source; /* Bus-relative int. source (IRQ) */
u32 gsirq; /* Global system interrupt */
u16 flags; /* MPS INTI flags */
};
/* MADT: Local APIC NMI Structure */
struct __packed acpi_madt_lapic_nmi {
u8 type; /* Type (4) */
u8 length; /* Length in bytes (6) */
u8 processor_id; /* ACPI processor ID */
u16 flags; /* MPS INTI flags */
u8 lint; /* Local APIC LINT# */
};
/* MCFG (PCI Express MMIO config space BAR description table) */
struct acpi_mcfg {
struct acpi_table_header header;
u8 reserved[8];
};
struct acpi_mcfg_mmconfig {
u32 base_address_l;
u32 base_address_h;
u16 pci_segment_group_number;
u8 start_bus_number;
u8 end_bus_number;
u8 reserved[4];
};
/* PM1_CNT bit defines */
#define PM1_CNT_SCI_EN BIT(0)
/* ACPI global NVS structure */
struct acpi_global_nvs;
/* CSRT (Core System Resource Table) */
struct acpi_csrt {
struct acpi_table_header header;
};
struct acpi_csrt_group {
u32 length;
u32 vendor_id;
u32 subvendor_id;
u16 device_id;
u16 subdevice_id;
u16 revision;
u16 reserved;
u32 shared_info_length;
};
struct acpi_csrt_shared_info {
u16 major_version;
u16 minor_version;
u32 mmio_base_low;
u32 mmio_base_high;
u32 gsi_interrupt;
u8 interrupt_polarity;
u8 interrupt_mode;
u8 num_channels;
u8 dma_address_width;
u16 base_request_line;
u16 num_handshake_signals;
u32 max_block_size;
};
/* Port types for ACPI _UPC object */
enum acpi_upc_type {
UPC_TYPE_A,
UPC_TYPE_MINI_AB,
UPC_TYPE_EXPRESSCARD,
UPC_TYPE_USB3_A,
UPC_TYPE_USB3_B,
UPC_TYPE_USB3_MICRO_B,
UPC_TYPE_USB3_MICRO_AB,
UPC_TYPE_USB3_POWER_B,
UPC_TYPE_C_USB2_ONLY,
UPC_TYPE_C_USB2_SS_SWITCH,
UPC_TYPE_C_USB2_SS,
UPC_TYPE_PROPRIETARY = 0xff,
/*
* The following types are not directly defined in the ACPI
* spec but are used by coreboot to identify a USB device type.
*/
UPC_TYPE_INTERNAL = 0xff,
UPC_TYPE_UNUSED,
UPC_TYPE_HUB
};
enum dev_scope_type {
SCOPE_PCI_ENDPOINT = 1,
SCOPE_PCI_SUB = 2,
SCOPE_IOAPIC = 3,
SCOPE_MSI_HPET = 4,
SCOPE_ACPI_NAMESPACE_DEVICE = 5
};
struct __packed dev_scope {
u8 type;
u8 length;
u8 reserved[2];
u8 enumeration;
u8 start_bus;
struct {
u8 dev;
u8 fn;
} __packed path[0];
};
enum dmar_type {
DMAR_DRHD = 0,
DMAR_RMRR = 1,
DMAR_ATSR = 2,
DMAR_RHSA = 3,
DMAR_ANDD = 4
};
enum {
DRHD_INCLUDE_PCI_ALL = BIT(0)
};
enum dmar_flags {
DMAR_INTR_REMAP = BIT(0),
DMAR_X2APIC_OPT_OUT = BIT(1),
DMAR_CTRL_PLATFORM_OPT_IN_FLAG = BIT(2),
};
struct dmar_entry {
u16 type;
u16 length;
u8 flags;
u8 reserved;
u16 segment;
u64 bar;
};
struct dmar_rmrr_entry {
u16 type;
u16 length;
u16 reserved;
u16 segment;
u64 bar;
u64 limit;
};
/* DMAR (DMA Remapping Reporting Structure) */
struct __packed acpi_dmar {
struct acpi_table_header header;
u8 host_address_width;
u8 flags;
u8 reserved[10];
struct dmar_entry structure[0];
};
/* DBG2 definitions are partially used for SPCR interface_type */
/* Types for port_type field */
#define ACPI_DBG2_SERIAL_PORT 0x8000
#define ACPI_DBG2_1394_PORT 0x8001
#define ACPI_DBG2_USB_PORT 0x8002
#define ACPI_DBG2_NET_PORT 0x8003
/* Subtypes for port_subtype field */
#define ACPI_DBG2_16550_COMPATIBLE 0x0000
#define ACPI_DBG2_16550_SUBSET 0x0001
#define ACPI_DBG2_ARM_PL011 0x0003
#define ACPI_DBG2_ARM_SBSA_32BIT 0x000D
#define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E
#define ACPI_DBG2_ARM_DCC 0x000F
#define ACPI_DBG2_BCM2835 0x0010
#define ACPI_DBG2_1394_STANDARD 0x0000
#define ACPI_DBG2_USB_XHCI 0x0000
#define ACPI_DBG2_USB_EHCI 0x0001
#define ACPI_DBG2_UNKNOWN 0x00FF
/* DBG2: Microsoft Debug Port Table 2 header */
struct __packed acpi_dbg2_header {
struct acpi_table_header header;
u32 devices_offset;
u32 devices_count;
};
/* DBG2: Microsoft Debug Port Table 2 device entry */
struct __packed acpi_dbg2_device {
u8 revision;
u16 length;
u8 address_count;
u16 namespace_string_length;
u16 namespace_string_offset;
u16 oem_data_length;
u16 oem_data_offset;
u16 port_type;
u16 port_subtype;
u8 reserved[2];
u16 base_address_offset;
u16 address_size_offset;
};
/* SPCR (Serial Port Console Redirection table) */
struct __packed acpi_spcr {
struct acpi_table_header header;
u8 interface_type;
u8 reserved[3];
struct acpi_gen_regaddr serial_port;
u8 interrupt_type;
u8 pc_interrupt;
u32 interrupt; /* Global system interrupt */
u8 baud_rate;
u8 parity;
u8 stop_bits;
u8 flow_control;
u8 terminal_type;
u8 reserved1;
u16 pci_device_id; /* Must be 0xffff if not PCI device */
u16 pci_vendor_id; /* Must be 0xffff if not PCI device */
u8 pci_bus;
u8 pci_device;
u8 pci_function;
u32 pci_flags;
u8 pci_segment;
u32 reserved2;
};
/* Tables defined/reserved by ACPI and generated by U-Boot */
enum acpi_tables {
ACPITAB_BERT,
ACPITAB_DBG2,
ACPITAB_DMAR,
ACPITAB_DSDT,
ACPITAB_ECDT,
ACPITAB_FACS,
ACPITAB_FADT,
ACPITAB_HEST,
ACPITAB_HPET,
ACPITAB_IVRS,
ACPITAB_MADT,
ACPITAB_MCFG,
ACPITAB_NHLT,
ACPITAB_RSDP,
ACPITAB_RSDT,
ACPITAB_SLIT,
ACPITAB_SPCR,
ACPITAB_SPMI,
ACPITAB_SRAT,
ACPITAB_SSDT,
ACPITAB_TCPA,
ACPITAB_TPM2,
ACPITAB_VFCT,
ACPITAB_XSDT,
ACPITAB_COUNT,
};
/**
* acpi_get_table_revision() - Get the revision number generated for a table
*
* This keeps the version-number information in one place
*
* @table: ACPI table to check
* @return version number that U-Boot generates
*/
int acpi_get_table_revision(enum acpi_tables table);
/**
* acpi_create_dmar() - Create a DMA Remapping Reporting (DMAR) table
*
* @dmar: Place to put the table
* @flags: DMAR flags to use
* @return 0 if OK, -ve on error
*/
int acpi_create_dmar(struct acpi_dmar *dmar, enum dmar_flags flags);
/**
* acpi_create_dbg2() - Create a DBG2 table
*
* This table describes how to access the debug UART
*
* @dbg2: Place to put information
* @port_type: Serial port type (see ACPI_DBG2_...)
* @port_subtype: Serial port sub-type (see ACPI_DBG2_...)
* @address: ACPI address of port
* @address_size: Size of address space
* @device_path: Path of device (created using acpi_device_path())
*/
void acpi_create_dbg2(struct acpi_dbg2_header *dbg2,
int port_type, int port_subtype,
struct acpi_gen_regaddr *address, uint32_t address_size,
const char *device_path);
/**
* acpi_fill_header() - Set up a new table header
*
* This sets all fields except length, revision, checksum and aslc_revision
*
* @header: ACPI header to update
* @signature: Table signature to use (4 characters)
*/
void acpi_fill_header(struct acpi_table_header *header, char *signature);
/**
* acpi_align() - Align the ACPI output pointer to a 16-byte boundary
*
* @ctx: ACPI context
*/
void acpi_align(struct acpi_ctx *ctx);
/**
* acpi_align64() - Align the ACPI output pointer to a 64-byte boundary
*
* @ctx: ACPI context
*/
void acpi_align64(struct acpi_ctx *ctx);
/**
* acpi_inc() - Increment the ACPI output pointer by a bit
*
* The pointer is NOT aligned afterwards.
*
* @ctx: ACPI context
* @amount: Amount to increment by
*/
void acpi_inc(struct acpi_ctx *ctx, uint amount);
/**
* acpi_inc_align() - Increment the ACPI output pointer by a bit and align
*
* The pointer is aligned afterwards to a 16-byte boundary
*
* @ctx: ACPI context
* @amount: Amount to increment by
*/
void acpi_inc_align(struct acpi_ctx *ctx, uint amount);
/**
* acpi_add_table() - Add a new table to the RSDP and XSDT
*
* @ctx: ACPI context
* @table: Table to add
* @return 0 if OK, -E2BIG if too many tables
*/
int acpi_add_table(struct acpi_ctx *ctx, void *table);
/**
* acpi_setup_base_tables() - Set up context along with RSDP, RSDT and XSDT
*
* Set up the context with the given start position. Some basic tables are
* always needed, so set them up as well.
*
* @ctx: Context to set up
*/
void acpi_setup_base_tables(struct acpi_ctx *ctx, void *start);
/**
* acpi_write_rsdp() - Write out an RSDP indicating where the ACPI tables are
*
* @rsdp: Address to write RSDP
* @rsdt: Address of RSDT
* @xsdt: Address of XSDT
*/
void acpi_write_rsdp(struct acpi_rsdp *rsdp, struct acpi_rsdt *rsdt,
struct acpi_xsdt *xsdt);
#endif /* !__ACPI__*/
#include <asm/acpi_table.h>
#endif /* __ACPI_TABLE_H__ */