u-boot-brain/drivers/pinctrl/rockchip/pinctrl-rk322x.c
Simon Glass 41575d8e4c dm: treewide: Rename auto_alloc_size members to be shorter
This construct is quite long-winded. In earlier days it made some sense
since auto-allocation was a strange concept. But with driver model now
used pretty universally, we can shorten this to 'auto'. This reduces
verbosity and makes it easier to read.

Coincidentally it also ensures that every declaration is on one line,
thus making dtoc's job easier.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-13 08:00:25 -07:00

300 lines
6.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <dm.h>
#include <log.h>
#include <dm/pinctrl.h>
#include <regmap.h>
#include <syscon.h>
#include <linux/bitops.h>
#include "pinctrl-rockchip.h"
static struct rockchip_mux_route_data rk3228_mux_route_data[] = {
{
/* pwm0-0 */
.bank_num = 0,
.pin = 26,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16),
}, {
/* pwm0-1 */
.bank_num = 3,
.pin = 21,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16) | BIT(0),
}, {
/* pwm1-0 */
.bank_num = 0,
.pin = 27,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16 + 1),
}, {
/* pwm1-1 */
.bank_num = 0,
.pin = 30,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 1) | BIT(1),
}, {
/* pwm2-0 */
.bank_num = 0,
.pin = 28,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16 + 2),
}, {
/* pwm2-1 */
.bank_num = 1,
.pin = 12,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 2) | BIT(2),
}, {
/* pwm3-0 */
.bank_num = 3,
.pin = 26,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16 + 3),
}, {
/* pwm3-1 */
.bank_num = 1,
.pin = 11,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 3) | BIT(3),
}, {
/* sdio-0_d0 */
.bank_num = 1,
.pin = 1,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16 + 4),
}, {
/* sdio-1_d0 */
.bank_num = 3,
.pin = 2,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16 + 4) | BIT(4),
}, {
/* spi-0_rx */
.bank_num = 0,
.pin = 13,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 5),
}, {
/* spi-1_rx */
.bank_num = 2,
.pin = 0,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 5) | BIT(5),
}, {
/* emmc-0_cmd */
.bank_num = 1,
.pin = 22,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 7),
}, {
/* emmc-1_cmd */
.bank_num = 2,
.pin = 4,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 7) | BIT(7),
}, {
/* uart2-0_rx */
.bank_num = 1,
.pin = 19,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 8),
}, {
/* uart2-1_rx */
.bank_num = 1,
.pin = 10,
.func = 2,
.route_offset = 0x50,
.route_val = BIT(16 + 8) | BIT(8),
}, {
/* uart1-0_rx */
.bank_num = 1,
.pin = 10,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16 + 11),
}, {
/* uart1-1_rx */
.bank_num = 3,
.pin = 13,
.func = 1,
.route_offset = 0x50,
.route_val = BIT(16 + 11) | BIT(11),
},
};
static int rk3228_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
int iomux_num = (pin / 8);
struct regmap *regmap;
int reg, ret, mask, mux_type;
u8 bit;
u32 data, route_reg, route_val;
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
? priv->regmap_pmu : priv->regmap_base;
/* get basic quadrupel of mux registers and the correct reg inside */
mux_type = bank->iomux[iomux_num].type;
reg = bank->iomux[iomux_num].offset;
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
if (bank->route_mask & BIT(pin)) {
if (rockchip_get_mux_route(bank, pin, mux, &route_reg,
&route_val)) {
ret = regmap_write(regmap, route_reg, route_val);
if (ret)
return ret;
}
}
data = (mask << (bit + 16));
data |= (mux & mask) << bit;
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3228_PULL_OFFSET 0x100
static void rk3228_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3228_PULL_OFFSET;
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
}
static int rk3228_set_pull(struct rockchip_pin_bank *bank,
int pin_num, int pull)
{
struct regmap *regmap;
int reg, ret;
u8 bit, type;
u32 data;
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
return -ENOTSUPP;
rk3228_calc_pull_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
type = bank->pull_type[pin_num / 8];
ret = rockchip_translate_pull_value(type, pull);
if (ret < 0) {
debug("unsupported pull setting %d\n", pull);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
data |= (ret << bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RK3228_DRV_GRF_OFFSET 0x200
static void rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
*regmap = priv->regmap_base;
*reg = RK3228_DRV_GRF_OFFSET;
*reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE;
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
*bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG);
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
}
static int rk3228_set_drive(struct rockchip_pin_bank *bank,
int pin_num, int strength)
{
struct regmap *regmap;
int reg, ret;
u32 data;
u8 bit;
int type = bank->drv[pin_num / 8].drv_type;
rk3228_calc_drv_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
ret = rockchip_translate_drive_value(type, strength);
if (ret < 0) {
debug("unsupported driver strength %d\n", strength);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << (bit + 16);
data |= (ret << bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
static struct rockchip_pin_bank rk3228_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
static struct rockchip_pin_ctrl rk3228_pin_ctrl = {
.pin_banks = rk3228_pin_banks,
.nr_banks = ARRAY_SIZE(rk3228_pin_banks),
.grf_mux_offset = 0x0,
.iomux_routes = rk3228_mux_route_data,
.niomux_routes = ARRAY_SIZE(rk3228_mux_route_data),
.set_mux = rk3228_set_mux,
.set_pull = rk3228_set_pull,
.set_drive = rk3228_set_drive,
};
static const struct udevice_id rk3228_pinctrl_ids[] = {
{
.compatible = "rockchip,rk3228-pinctrl",
.data = (ulong)&rk3228_pin_ctrl
},
{ }
};
U_BOOT_DRIVER(pinctrl_rk3228) = {
.name = "rockchip_rk3228_pinctrl",
.id = UCLASS_PINCTRL,
.of_match = rk3228_pinctrl_ids,
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
.ops = &rockchip_pinctrl_ops,
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.bind = dm_scan_fdt_dev,
#endif
.probe = rockchip_pinctrl_probe,
};