mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
41575d8e4c
This construct is quite long-winded. In earlier days it made some sense since auto-allocation was a strange concept. But with driver model now used pretty universally, we can shorten this to 'auto'. This reduces verbosity and makes it easier to read. Coincidentally it also ensures that every declaration is on one line, thus making dtoc's job easier. Signed-off-by: Simon Glass <sjg@chromium.org>
134 lines
3.5 KiB
C
134 lines
3.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
static int rk3188_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int iomux_num = (pin / 8);
|
|
struct regmap *regmap;
|
|
int reg, ret, mask, mux_type;
|
|
u8 bit;
|
|
u32 data;
|
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
? priv->regmap_pmu : priv->regmap_base;
|
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
|
mux_type = bank->iomux[iomux_num].type;
|
|
reg = bank->iomux[iomux_num].offset;
|
|
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
|
|
|
|
data = (mask << (bit + 16));
|
|
data |= (mux & mask) << bit;
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3188_PULL_OFFSET 0x164
|
|
#define RK3188_PULL_PMU_OFFSET 0x64
|
|
|
|
static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
/* The first 12 pins of the first bank are located elsewhere */
|
|
if (bank->bank_num == 0 && pin_num < 12) {
|
|
*regmap = priv->regmap_pmu;
|
|
*reg = RK3188_PULL_PMU_OFFSET;
|
|
|
|
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
|
|
*bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG;
|
|
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
|
|
} else {
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3188_PULL_OFFSET;
|
|
|
|
/* correct the offset, as it is the 2nd pull register */
|
|
*reg -= 4;
|
|
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
|
|
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
|
|
|
|
/*
|
|
* The bits in these registers have an inverse ordering
|
|
* with the lowest pin being in bits 15:14 and the highest
|
|
* pin in bits 1:0
|
|
*/
|
|
*bit = 7 - (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
|
|
}
|
|
}
|
|
|
|
static int rk3188_set_pull(struct rockchip_pin_bank *bank,
|
|
int pin_num, int pull)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u8 bit, type;
|
|
u32 data;
|
|
|
|
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
|
|
return -ENOTSUPP;
|
|
|
|
rk3188_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
type = bank->pull_type[pin_num / 8];
|
|
ret = rockchip_translate_pull_value(type, pull);
|
|
if (ret < 0) {
|
|
debug("unsupported pull setting %d\n", pull);
|
|
return ret;
|
|
}
|
|
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct rockchip_pin_bank rk3188_pin_banks[] = {
|
|
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0),
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
};
|
|
|
|
static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
|
|
.pin_banks = rk3188_pin_banks,
|
|
.nr_banks = ARRAY_SIZE(rk3188_pin_banks),
|
|
.grf_mux_offset = 0x60,
|
|
.set_mux = rk3188_set_mux,
|
|
.set_pull = rk3188_set_pull,
|
|
};
|
|
|
|
static const struct udevice_id rk3188_pinctrl_ids[] = {
|
|
{ .compatible = "rockchip,rk3188-pinctrl",
|
|
.data = (ulong)&rk3188_pin_ctrl },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(rockchip_rk3188_pinctrl) = {
|
|
.name = "rockchip_rk3188_pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = rk3188_pinctrl_ids,
|
|
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
|
|
.ops = &rockchip_pinctrl_ops,
|
|
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
.bind = dm_scan_fdt_dev,
|
|
#endif
|
|
.probe = rockchip_pinctrl_probe,
|
|
};
|