mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
5d387d0df9
This commit adds emulation of sandbox PMIC device, which includes: - PMIC I2C emulation driver - PMIC I/O driver (UCLASS_PMIC) - PMIC regulator driver (UCLASS_REGULATOR) The sandbox PMIC has 12 significant registers and 4 as padding to 16 bytes, which allows using 'i2c md' command with the default count (16). The sandbox PMIC provides regulators: - 2x BUCK - 2x LDO Each, with adjustable output: - Enable state - Voltage - Current limit (LDO1/BUCK1 only) - Operation mode (different for BUCK and LDO) Each attribute has it's own register, beside the enable state, which depends on operation mode. The header file: sandbox_pmic.h includes PMIC's default register values, which are set on i2c pmic emul driver's probe() method. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on sandbox: Tested-by: Simon Glass <sjg@chromium.org>
36 lines
874 B
Plaintext
36 lines
874 B
Plaintext
Sandbox pmic
|
|
|
|
This device uses two drivers:
|
|
- drivers/power/pmic/sandbox.c (for parent device)
|
|
- drivers/power/regulator/sandbox.c (for child regulators)
|
|
|
|
This file describes the binding info for the PMIC driver.
|
|
|
|
To bind the regulators, please read the regulator binding info:
|
|
- doc/device-tree-bindings/regulator/sandbox.txt
|
|
|
|
Required PMIC node properties:
|
|
- compatible: "sandbox,pmic"
|
|
- reg = 0x40
|
|
|
|
Required PMIC's "emul" subnode, with property:
|
|
- compatible: "sandbox,i2c-pmic"
|
|
|
|
With the above properties, the pmic device can be used for read/write only.
|
|
To bind each regulator, the optional regulator subnodes should exists.
|
|
|
|
Optional subnodes:
|
|
- ldo/buck subnodes of each device's regulator (see regulator binding info)
|
|
|
|
Example:
|
|
|
|
sandbox_pmic {
|
|
compatible = "sandbox,pmic";
|
|
reg = <0x40>;
|
|
|
|
/* Mandatory for I/O */
|
|
emul {
|
|
compatible = "sandbox,i2c-pmic";
|
|
};
|
|
};
|