mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
ef99f3d9e8
Add initial support for Google's Coral Dev Board based on i.MX8MQ. https://coral.ai/products/dev-board The Phanbell naming has been used here to match the naming convention used in Google's U-Boot source tree: https://coral.googlesource.com/uboot-imx/ Co-developed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> Tested-by: Marco Franchi <marcofrk@gmail.com>
38 lines
1.0 KiB
Plaintext
38 lines
1.0 KiB
Plaintext
U-Boot for Google's i.MX8MQ Phanbell board
|
|
|
|
Quick Start
|
|
===========
|
|
- Build the ARM Trusted firmware binary
|
|
- Get ddr and hdmi firmware
|
|
- Build U-Boot
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
======================================
|
|
Note: srctree is U-Boot source directory
|
|
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
|
|
branch: imx_4.19.35_1.0.0
|
|
$ make PLAT=imx8mq bl31
|
|
$ cp build/imx8mq/release/bl31.bin $(builddir)
|
|
|
|
Get the ddr and hdmi firmware
|
|
=============================
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
|
|
$ chmod +x firmware-imx-7.9.bin
|
|
$ ./firmware-imx-7.9.bin
|
|
$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
|
|
$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
|
|
|
|
Build U-Boot
|
|
============
|
|
$ export CROSS_COMPILE=aarch64-linux-gnu-
|
|
$ make imx8mq_phanbell_defconfig
|
|
$ make flash.bin
|
|
|
|
Burn the flash.bin to MicroSD card offset 33KB
|
|
$sudo dd if=flash.bin of=/dev/sd[x] bs=1K seek=33
|
|
|
|
Boot
|
|
====
|
|
Set Boot switch SW1: 1011 to boot from Micro SD.
|