55 lines
1.3 KiB
Plaintext
55 lines
1.3 KiB
Plaintext
U-Boot for the NXP i.MX8QM EVK board
|
|
|
|
Quick Start
|
|
===========
|
|
|
|
- Build the ARM Trusted firmware binary
|
|
- Get scfw_tcm.bin and ahab-container.img
|
|
- Build U-Boot
|
|
- Flash the binary into the SD card
|
|
- Boot
|
|
|
|
Get and Build the ARM Trusted firmware
|
|
======================================
|
|
|
|
$ git clone https://source.codeaurora.org/external/imx/imx-atf
|
|
$ cd imx-atf/
|
|
$ git checkout origin/imx_4.14.78_1.0.0_ga -b imx_4.14.78_1.0.0_ga
|
|
$ make PLAT=imx8qm bl31
|
|
|
|
And copy the resulting bl31.bin to u-boot directory:
|
|
|
|
$ cp build/imx8qm/release/bl31.bin path/to/u-boot/
|
|
|
|
Get scfw_tcm.bin and ahab-container.img
|
|
=======================================
|
|
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-sc-firmware-1.1.bin
|
|
$ chmod +x imx-sc-firmware-1.1.bin
|
|
$ ./imx-sc-firmware-1.1.bin
|
|
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
|
|
$ chmod +x firmware-imx-8.0.bin
|
|
$ ./firmware-imx-8.0.bin
|
|
|
|
|
|
And copy the following firmwares to U-Boot folder:
|
|
|
|
* `imx-sc-firmware-1.1/mx8qm-mek-scfw-tcm.bin`
|
|
* `firmware-imx-8.0/firmware/seco/mx8qm-ahab-container.img`
|
|
|
|
Build U-Boot
|
|
============
|
|
$ make imx8qm_mek_defconfig
|
|
$ make flash.bin
|
|
|
|
Flash the binary into the SD card
|
|
=================================
|
|
|
|
Burn the flash.bin binary to SD card offset 32KB:
|
|
|
|
$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32
|
|
|
|
Boot
|
|
====
|
|
Set Boot switch SW2: 001100.
|