/* * * (C) Copyright 2002 * Daniel Engström, Omicron Ceti AB . * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; #undef SC520_CDP_DEBUG #ifdef SC520_CDP_DEBUG #define PRINTF(fmt,args...) printf (fmt ,##args) #else #define PRINTF(fmt,args...) #endif /* ------------------------------------------------------------------------- */ /* * Theory: * We first set up all IRQs to be non-pci, edge triggered, * when we later enumerate the pci bus and pci_sc520_fixup_irq() gets * called we reallocate irqs to the pci bus with sc520_pci_set_irq() * as needed. Whe choose the irqs to gram from a configurable list * inside pci_sc520_fixup_irq() (If this list contains stupid irq's * such as 0 thngas will not work) */ static void irq_init(void) { /* disable global interrupt mode */ sc520_mmcr->picicr = 0x40; /* set all irqs to edge */ sc520_mmcr->pic_mode[0] = 0x00; sc520_mmcr->pic_mode[1] = 0x00; sc520_mmcr->pic_mode[2] = 0x00; /* active low polarity on PIC interrupt pins, * active high polarity on all other irq pins */ sc520_mmcr->intpinpol = 0x0000; /* set irq number mapping */ sc520_mmcr->gp_tmr_int_map[0] = SC520_IRQ_DISABLED; /* disable GP timer 0 INT */ sc520_mmcr->gp_tmr_int_map[1] = SC520_IRQ_DISABLED; /* disable GP timer 1 INT */ sc520_mmcr->gp_tmr_int_map[2] = SC520_IRQ_DISABLED; /* disable GP timer 2 INT */ sc520_mmcr->pit_int_map[0] = SC520_IRQ0; /* Set PIT timer 0 INT to IRQ0 */ sc520_mmcr->pit_int_map[1] = SC520_IRQ_DISABLED; /* disable PIT timer 1 INT */ sc520_mmcr->pit_int_map[2] = SC520_IRQ_DISABLED; /* disable PIT timer 2 INT */ sc520_mmcr->pci_int_map[0] = SC520_IRQ_DISABLED; /* disable PCI INT A */ sc520_mmcr->pci_int_map[1] = SC520_IRQ_DISABLED; /* disable PCI INT B */ sc520_mmcr->pci_int_map[2] = SC520_IRQ_DISABLED; /* disable PCI INT C */ sc520_mmcr->pci_int_map[3] = SC520_IRQ_DISABLED; /* disable PCI INT D */ sc520_mmcr->dmabcintmap = SC520_IRQ_DISABLED; /* disable DMA INT */ sc520_mmcr->ssimap = SC520_IRQ_DISABLED; /* disable Synchronius serial INT */ sc520_mmcr->wdtmap = SC520_IRQ_DISABLED; /* disable Watchdog INT */ sc520_mmcr->rtcmap = SC520_IRQ8; /* Set RTC int to 8 */ sc520_mmcr->wpvmap = SC520_IRQ_DISABLED; /* disable write protect INT */ sc520_mmcr->icemap = SC520_IRQ1; /* Set ICE Debug Serielport INT to IRQ1 */ sc520_mmcr->ferrmap = SC520_IRQ13; /* Set FP error INT to IRQ13 */ if (CONFIG_SYS_USE_SIO_UART) { sc520_mmcr->uart_int_map[0] = SC520_IRQ_DISABLED; /* disable internal UART1 INT */ sc520_mmcr->uart_int_map[1] = SC520_IRQ_DISABLED; /* disable internal UART2 INT */ sc520_mmcr->gp_int_map[3] = SC520_IRQ3; /* Set GPIRQ3 (ISA IRQ3) to IRQ3 */ sc520_mmcr->gp_int_map[4] = SC520_IRQ4; /* Set GPIRQ4 (ISA IRQ4) to IRQ4 */ } else { sc520_mmcr->uart_int_map[0] = SC520_IRQ4; /* Set internal UART2 INT to IRQ4 */ sc520_mmcr->uart_int_map[1] = SC520_IRQ3; /* Set internal UART2 INT to IRQ3 */ sc520_mmcr->gp_int_map[3] = SC520_IRQ_DISABLED; /* disable GPIRQ3 (ISA IRQ3) */ sc520_mmcr->gp_int_map[4] = SC520_IRQ_DISABLED; /* disable GPIRQ4 (ISA IRQ4) */ } sc520_mmcr->gp_int_map[1] = SC520_IRQ1; /* Set GPIRQ1 (SIO IRQ1) to IRQ1 */ sc520_mmcr->gp_int_map[5] = SC520_IRQ5; /* Set GPIRQ5 (ISA IRQ5) to IRQ5 */ sc520_mmcr->gp_int_map[6] = SC520_IRQ6; /* Set GPIRQ6 (ISA IRQ6) to IRQ6 */ sc520_mmcr->gp_int_map[7] = SC520_IRQ7; /* Set GPIRQ7 (ISA IRQ7) to IRQ7 */ sc520_mmcr->gp_int_map[8] = SC520_IRQ8; /* Set GPIRQ8 (SIO IRQ8) to IRQ8 */ sc520_mmcr->gp_int_map[9] = SC520_IRQ9; /* Set GPIRQ9 (ISA IRQ2) to IRQ9 */ sc520_mmcr->gp_int_map[0] = SC520_IRQ11; /* Set GPIRQ0 (ISA IRQ11) to IRQ10 */ sc520_mmcr->gp_int_map[2] = SC520_IRQ12; /* Set GPIRQ2 (ISA IRQ12) to IRQ12 */ sc520_mmcr->gp_int_map[10] = SC520_IRQ14; /* Set GPIRQ10 (ISA IRQ14) to IRQ14 */ sc520_mmcr->pcihostmap = 0x11f; /* Map PCI hostbridge INT to NMI */ sc520_mmcr->eccmap = 0x100; /* Map SDRAM ECC failure INT to NMI */ } #ifdef CONFIG_PCI /* PCI stuff */ static void pci_sc520_cdp_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { /* a configurable lists of irqs to steal * when we need one (a board with more pci interrupt pins * would use a larger table */ static int irq_list[] = { CONFIG_SYS_FIRST_PCI_IRQ, CONFIG_SYS_SECOND_PCI_IRQ, CONFIG_SYS_THIRD_PCI_IRQ, CONFIG_SYS_FORTH_PCI_IRQ }; static int next_irq_index=0; uchar tmp_pin; int pin; pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_PIN, &tmp_pin); pin = tmp_pin; pin-=1; /* pci config space use 1-based numbering */ if (-1 == pin) { return; /* device use no irq */ } /* map device number + pin to a pin on the sc520 */ switch (PCI_DEV(dev)) { case 20: pin+=SC520_PCI_INTA; break; case 19: pin+=SC520_PCI_INTB; break; case 18: pin+=SC520_PCI_INTC; break; case 17: pin+=SC520_PCI_INTD; break; default: return; } pin&=3; /* wrap around */ if (sc520_pci_ints[pin] == -1) { /* re-route one interrupt for us */ if (next_irq_index > 3) { return; } if (pci_sc520_set_irq(pin, irq_list[next_irq_index])) { return; } next_irq_index++; } if (-1 != sc520_pci_ints[pin]) { pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, sc520_pci_ints[pin]); } PRINTF("fixup_irq: device %d pin %c irq %d\n", PCI_DEV(dev), 'A' + pin, sc520_pci_ints[pin]); } static struct pci_controller sc520_cdp_hose = { fixup_irq: pci_sc520_cdp_fixup_irq, }; void pci_init_board(void) { pci_sc520_init(&sc520_cdp_hose); } #endif static void silence_uart(int port) { outb(0, port+1); } void setup_ali_sio(int uart_primary) { ali512x_init(); ali512x_set_fdc(ALI_ENABLED, 0x3f2, 6, 0); ali512x_set_pp(ALI_ENABLED, 0x278, 7, 3); ali512x_set_uart(ALI_ENABLED, ALI_UART1, uart_primary?0x3f8:0x3e8, 4); ali512x_set_uart(ALI_ENABLED, ALI_UART2, uart_primary?0x2f8:0x2e8, 3); ali512x_set_rtc(ALI_DISABLED, 0, 0); ali512x_set_kbc(ALI_ENABLED, 1, 12); ali512x_set_cio(ALI_ENABLED); /* IrDa pins */ ali512x_cio_function(12, 1, 0, 0); ali512x_cio_function(13, 1, 0, 0); /* SSI chip select pins */ ali512x_cio_function(14, 0, 0, 0); /* SSI_CS */ ali512x_cio_function(15, 0, 0, 0); /* SSI_MV */ ali512x_cio_function(16, 0, 0, 0); /* SSI_SPI# */ /* Board REV pins */ ali512x_cio_function(20, 0, 0, 1); ali512x_cio_function(21, 0, 0, 1); ali512x_cio_function(22, 0, 0, 1); ali512x_cio_function(23, 0, 0, 1); } /* set up the ISA bus timing and system address mappings */ static void bus_init(void) { /* set up the GP IO pins */ sc520_mmcr->piopfs31_16 = 0xf7ff; /* set the GPIO pin function 31-16 reg */ sc520_mmcr->piopfs15_0 = 0xffff; /* set the GPIO pin function 15-0 reg */ sc520_mmcr->cspfs = 0xf8; /* set the CS pin function reg */ sc520_mmcr->clksel = 0x70; sc520_mmcr->gpcsrt = 1; /* set the GP CS offset */ sc520_mmcr->gpcspw = 3; /* set the GP CS pulse width */ sc520_mmcr->gpcsoff = 1; /* set the GP CS offset */ sc520_mmcr->gprdw = 3; /* set the RD pulse width */ sc520_mmcr->gprdoff = 1; /* set the GP RD offset */ sc520_mmcr->gpwrw = 3; /* set the GP WR pulse width */ sc520_mmcr->gpwroff = 1; /* set the GP WR offset */ sc520_mmcr->bootcsctl = 0x1823; /* set up timing of BOOTCS */ sc520_mmcr->romcs1ctl = 0x1823; /* set up timing of ROMCS1 */ sc520_mmcr->romcs2ctl = 0x1823; /* set up timing of ROMCS2 */ /* adjust the memory map: * by default the first 256MB (0x00000000 - 0x0fffffff) is mapped to SDRAM * and 256MB to 1G-128k (0x1000000 - 0x37ffffff) is mapped to PCI mmio * we need to map 1G-128k - 1G (0x38000000 - 0x3fffffff) to CS1 */ /* SRAM = GPCS3 128k @ d0000-effff*/ sc520_mmcr->par[2] = 0x4e00400d; /* IDE0 = GPCS6 1f0-1f7 */ sc520_mmcr->par[3] = 0x380801f0; /* IDE1 = GPCS7 3f6 */ sc520_mmcr->par[4] = 0x3c0003f6; /* bootcs */ sc520_mmcr->par[12] = 0x8bffe800; /* romcs2 */ sc520_mmcr->par[13] = 0xcbfff000; /* romcs1 */ sc520_mmcr->par[14] = 0xabfff800; /* 680 LEDS */ sc520_mmcr->par[15] = 0x30000640; sc520_mmcr->adddecctl = 0; asm ("wbinvd\n"); /* Flush cache, req. after setting the unchached attribute ona PAR */ if (CONFIG_SYS_USE_SIO_UART) { sc520_mmcr->adddecctl = sc520_mmcr->adddecctl | UART2_DIS | UART1_DIS; setup_ali_sio(1); } else { sc520_mmcr->adddecctl = sc520_mmcr->adddecctl & ~(UART2_DIS|UART1_DIS); setup_ali_sio(0); silence_uart(0x3e8); silence_uart(0x2e8); } } /* GPCS usage * GPCS0 PIO27 (NMI) * GPCS1 ROMCS1 * GPCS2 ROMCS2 * GPCS3 SRAMCS PAR2 * GPCS4 unused PAR3 * GPCS5 unused PAR4 * GPCS6 IDE * GPCS7 IDE */ /* par usage: * PAR0 legacy_video * PAR1 PCI ROM mapping * PAR2 SRAM * PAR3 IDE * PAR4 IDE * PAR5 legacy_video * PAR6 legacy_video * PAR7 legacy_video * PAR8 legacy_video * PAR9 legacy_video * PAR10 legacy_video * PAR11 ISAROM * PAR12 BOOTCS * PAR13 ROMCS1 * PAR14 ROMCS2 * PAR15 Port 0x680 LED display */ /* * This function should map a chunk of size bytes * of the system address space to the ISA bus * * The function will return the memory address * as seen by the host (which may very will be the * same as the bus address) */ u32 isa_map_rom(u32 bus_addr, int size) { u32 par; PRINTF("isa_map_rom asked to map %d bytes at %x\n", size, bus_addr); par = size; if (par < 0x80000) { par = 0x80000; } par >>= 12; par--; par&=0x7f; par <<= 18; par |= (bus_addr>>12); par |= 0x50000000; PRINTF ("setting PAR11 to %x\n", par); /* Map rom 0x10000 with PAR1 */ sc520_mmcr->par[11] = par; return bus_addr; } /* * this function removed any mapping created * with pci_get_rom_window() */ void isa_unmap_rom(u32 addr) { PRINTF("isa_unmap_rom asked to unmap %x", addr); if ((addr>>12) == (sc520_mmcr->par[11] & 0x3ffff)) { sc520_mmcr->par[11] = 0; PRINTF(" done\n"); return; } PRINTF(" not ours\n"); } #ifdef CONFIG_PCI #define PCI_ROM_TEMP_SPACE 0x10000 /* * This function should map a chunk of size bytes * of the system address space to the PCI bus, * suitable to map PCI ROMS (bus address < 16M) * the function will return the host memory address * which should be converted into a bus address * before used to configure the PCI rom address * decoder */ u32 pci_get_rom_window(struct pci_controller *hose, int size) { u32 par; par = size; if (par < 0x80000) { par = 0x80000; } par >>= 16; par--; par&=0x7ff; par <<= 14; par |= (PCI_ROM_TEMP_SPACE>>16); par |= 0x72000000; PRINTF ("setting PAR1 to %x\n", par); /* Map rom 0x10000 with PAR1 */ sc520_mmcr->par[1] = par; return PCI_ROM_TEMP_SPACE; } /* * this function removed any mapping created * with pci_get_rom_window() */ void pci_remove_rom_window(struct pci_controller *hose, u32 addr) { PRINTF("pci_remove_rom_window: %x", addr); if (addr == PCI_ROM_TEMP_SPACE) { sc520_mmcr->par[1] = 0; PRINTF(" done\n"); return; } PRINTF(" not ours\n"); } /* * This function is called in order to provide acces to the * legacy video I/O ports on the PCI bus. * After this function accesses to I/O ports 0x3b0-0x3bb and * 0x3c0-0x3df shuld result in transactions on the PCI bus. * */ int pci_enable_legacy_video_ports(struct pci_controller *hose) { /* Map video memory to 0xa0000*/ sc520_mmcr->par[0] = 0x7200400a; /* forward all I/O accesses to PCI */ sc520_mmcr->adddecctl = sc520_mmcr->adddecctl | IO_HOLE_DEST_PCI; /* so we map away all io ports to pci (only way to access pci io * below 0x400. But then we have to map back the portions that we dont * use so that the generate cycles on the GPIO bus where the sio and * ISA slots are connected, this requre the use of several PAR registers */ /* bring 0x100 - 0x1ef back to ISA using PAR5 */ sc520_mmcr->par[5] = 0x30ef0100; /* IDE use 1f0-1f7 */ /* bring 0x1f8 - 0x2f7 back to ISA using PAR6 */ sc520_mmcr->par[6] = 0x30ff01f8; /* com2 use 2f8-2ff */ /* bring 0x300 - 0x3af back to ISA using PAR7 */ sc520_mmcr->par[7] = 0x30af0300; /* vga use 3b0-3bb */ /* bring 0x3bc - 0x3bf back to ISA using PAR8 */ sc520_mmcr->par[8] = 0x300303bc; /* vga use 3c0-3df */ /* bring 0x3e0 - 0x3f5 back to ISA using PAR9 */ sc520_mmcr->par[9] = 0x301503e0; /* ide use 3f6 */ /* bring 0x3f7 back to ISA using PAR10 */ sc520_mmcr->par[10] = 0x300003f7; /* com1 use 3f8-3ff */ return 0; } #endif /* * Miscelaneous platform dependent initialisations */ int board_init(void) { init_sc520(); bus_init(); irq_init(); /* max drive current on SDRAM */ sc520_mmcr->dsctl = 0x0100; /* enter debug mode after next reset (only if jumper is also set) */ sc520_mmcr->rescfg = 0x08; /* configure the software timer to 33.333MHz */ sc520_mmcr->swtmrcfg = 0; gd->bus_clk = 33333000; return 0; } int dram_init(void) { init_sc520_dram(); return 0; } void show_boot_progress(int val) { if (val < -32) val = -1; /* let things compatible */ outb(val&0xff, 0x80); outb((val&0xff00)>>8, 0x680); } int last_stage_init(void) { int minor; int major; major = minor = 0; major |= ali512x_cio_in(23)?2:0; major |= ali512x_cio_in(22)?1:0; minor |= ali512x_cio_in(21)?2:0; minor |= ali512x_cio_in(20)?1:0; printf("AMD SC520 CDP revision %d.%d\n", major, minor); return 0; } void ssi_chip_select(int dev) { /* Spunk board: SPI EEPROM is active-low, MW EEPROM and AUX are active high */ switch (dev) { case 1: /* SPI EEPROM */ ali512x_cio_out(16, 0); break; case 2: /* MW EEPROM */ ali512x_cio_out(15, 1); break; case 3: /* AUX */ ali512x_cio_out(14, 1); break; case 0: ali512x_cio_out(16, 1); ali512x_cio_out(15, 0); ali512x_cio_out(14, 0); break; default: printf("Illegal SSI device requested: %d\n", dev); } } void spi_eeprom_probe(int x) { } int spi_eeprom_read(int x, int offset, uchar *buffer, int len) { return 0; } int spi_eeprom_write(int x, int offset, uchar *buffer, int len) { return 0; } void spi_init_f(void) { #ifdef CONFIG_SYS_SC520_CDP_USE_SPI spi_eeprom_probe(1); #endif #ifdef CONFIG_SYS_SC520_CDP_USE_MW mw_eeprom_probe(2); #endif } ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) { int offset; int i; ssize_t res; offset = 0; for (i=0;i