/* * Copyright (C) 2012 Altera Corporation * * SPDX-License-Identifier: GPL-2.0+ */ #include #include #include #include #include #include DECLARE_GLOBAL_DATA_PTR; static struct socfpga_system_manager *sysmgr_regs = (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS; int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); return 0; } /* * DesignWare Ethernet initialization */ #ifdef CONFIG_DESIGNWARE_ETH int cpu_eth_init(bd_t *bis) { #if CONFIG_EMAC_BASE == SOCFPGA_EMAC0_ADDRESS const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB; #elif CONFIG_EMAC_BASE == SOCFPGA_EMAC1_ADDRESS const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB; #else #error "Incorrect CONFIG_EMAC_BASE value!" #endif /* Initialize EMAC. This needs to be done at least once per boot. */ /* * Putting the EMAC controller to reset when configuring the PHY * interface select at System Manager */ socfpga_emac_reset(1); /* Clearing emac0 PHY interface select to 0 */ clrbits_le32(&sysmgr_regs->emacgrp_ctrl, SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift); /* configure to PHY interface select choosed */ setbits_le32(&sysmgr_regs->emacgrp_ctrl, SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift); /* Release the EMAC controller from reset */ socfpga_emac_reset(0); /* initialize and register the emac */ return designware_initialize(CONFIG_EMAC_BASE, CONFIG_PHY_INTERFACE_MODE); } #endif #if defined(CONFIG_DISPLAY_CPUINFO) /* * Print CPU information */ int print_cpuinfo(void) { puts("CPU : Altera SOCFPGA Platform\n"); return 0; } #endif #if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \ defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE) int overwrite_console(void) { return 0; } #endif int arch_cpu_init(void) { /* * If the HW watchdog is NOT enabled, make sure it is not running, * for example because it was enabled in the preloader. This might * trigger a watchdog-triggered reboot of Linux kernel later. */ #ifndef CONFIG_HW_WATCHDOG socfpga_watchdog_reset(); #endif return 0; } int misc_init_r(void) { return 0; }