Commit Graph

8 Commits

Author SHA1 Message Date
Christian Hewitt
702b8300f0 boards: amlogic: update documentation for Beelink GT-King/Pro
Update the device matrix and add build instructions.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:55 +01:00
Christian Hewitt
d412a6015e boards: amlogic: update documentation for WeTek Core2
Update the device matrix and add build instructions.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: added wetek-core2.rst to q200 MAINTAINERS and added blank lines to fix build]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Jerome Brunet
ade0100a91 arm64: meson: add support for libretech-cc v2
Add support for the Amlogic based libretech cc version 2.
As version 1, it is based on the s905x SoC.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: Fixed libretech-cc.rst bullet points]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-01-11 14:59:54 +01:00
Neil Armstrong
72f2283973 doc: board: vim3: Fix build instructions
The build instructions were buggy and changed a little since they
were written.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-05 16:26:02 +01:00
Neil Armstrong
82aec2e53c doc: board: amlogic: Update support matrix
Update the matrix table with new supported features and
new SoC features to support.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-11-05 16:26:02 +01:00
Neil Armstrong
adbff64af7 board: amlogic: vim3: add support for dynamic PCIe enable
The VIM3 on-board  MCU can mux the PCIe/USB3.0 shared differential
lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between
an USB3.0 Type A connector and a M.2 Key M slot.
The PHY driving these differential lines is shared between
the USB3.0 controller and the PCIe Controller, thus only
a single controller can use it.

This adds this dynamic switching right before booting Linux
and the configuration steps in the boards documentation.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed warning by replacing min() by min_t()]
2020-10-05 17:59:45 +02:00
Christian Hewitt
8888d83773 boards: amlogic: add Odroid C4 support
Odroid C4 is an Amlogic SM1 device, the board config and board documentation
are adapted from the Odroid-N2 support from the same vendor.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
[narmstrong: fix odroid-c4.rst typos and structure]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
2020-07-08 10:52:45 +02:00
Neil Armstrong
0ce3639d6f board: amlogic: move boards doc into doc/board/amlogic
Move the natural text Amlogic board README files to doc/board/amlogic
into reStructuredText and :
- add reStructuredText markup for bash code
- fix secondary titles markup
- move board support into global support matrix

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18 10:24:13 +02:00