Commit Graph

65 Commits

Author SHA1 Message Date
Simon Glass
869588decd Convert CONFIG_SYS_STDIO_DEREGISTER to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_STDIO_DEREGISTER

This option should never be enabled in SPL, so use
CONFIG_IS_ENABLED(SYS_STDIO_DEREGISTER) when checking the option.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Re-sync]
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-23 18:34:17 -04:00
Masahiro Yamada
8319aeb1da usb: squash lines for immediate return
This makes functions much simpler.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-09-23 17:53:48 -04:00
Hans de Goede
9a80e71435 usb: kbd: Do not deregister usbkbd twice when using dm
The dm usb_kbd_remove function() will deregister the usb keyboard for
us on a "usb reset" / "usb stop" so there is no need to manually call
usb_kbd_deregister() in the dm case.

This commit removes usb_kbd_deregister() in the dm case fixing the
following "usb reset" errors:

usb_kbd_remove: warning, ret=-6
device_remove: Device 'usb_kbd' failed to remove, but children are gone

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-10 17:18:42 +02:00
Marek Vasut
bdbcbe752e usb: kbd: Prevent out of bound access
Scan code 0x39 is CapsLock, which is not a printable character and thus
is not covered by either usb_kbd_numkey_shifted[] or usb_kbd_numkey[].
Fix the scan code check to avoid looking it up in either of the arrays.

Signed-off-by: Marek Vasut <marex@denx.de>
2016-01-25 22:00:46 +01:00
Simon Glass
8a83487030 dm: usb: Add a remove() method for USB keyboards
At present USB keyboards are not properly removed with driver model. Add the
code to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2016-01-07 11:28:03 -07:00
Stephen Warren
e4b70d8035 usb: kbd: don't use int xfers when polling via ctrl xfers
When CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP is enabled, use a
GET_REPORT control transfer to retrieve the initial state of the
keyboard. This matches the technique used to poll the keyboard state.
This is useful since it eliminates the remaining use of interrupt
transfers from the USB keyboard driver, which allows it to work with
USB HCD that don't support interrupt transfers.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
2015-12-17 21:54:41 +01:00
Simon Glass
2cdb58ebdc usb: Avoid open-coded USB constants in usb_kbd.c
Replace the open-coded values with constants to make it clearer what they
mean.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:52 -07:00
Simon Glass
17627609e0 usb: Drop unused code in usb_kbd.c
This was missed in the conversion to driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:52 -07:00
Simon Glass
24b852a7a2 Move console definitions into a new console.h file
The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:27:50 -07:00
Simon Glass
e84421d8f3 dm: input: Create a keyboard uclass
Add a uclass for keyboard input, mirroring the existing stdio methods.
This is enabled by a new CONFIG_DM_KEYBOARD option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19 20:13:39 -07:00
Simon Glass
34ab37eef5 dm: usb: Add support for USB keyboards with driver model
Switch USB keyboards over to use driver model instead of scanning with the
horrible usb_get_dev_index() function. This involves creating a new uclass
for keyboards, although so far there is no API.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:13:39 -07:00
Bin Meng
1caf934a05 video: Drop DEV_FLAGS_SYSTEM flag
DEV_FLAGS_SYSTEM does not have any actual meaning, hence drop it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-05 08:22:21 +01:00
Simon Glass
cf92e05c01 Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header
Now that we have a new header file for cache-aligned allocation, we should
move the stack-based allocation macro there also.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-09-11 17:15:20 -04:00
Simon Glass
abb59cffcf dm: usb: Adjust the USB_DEVICE() macro naming
In Linux USB_DEVICE() is used to declare a USB device by vendor/device ID.
We should follow the same convention in U-Boot. Rename the existing
USB_DEVICE() macro to U_BOOT_USB_DEVICE() and bring in the USB_DEVICE()
macro from Linux for use in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-21 17:39:40 -06:00
Hans de Goede
de451493f1 usb: kbd: Disable idle input reports when we do not need them
When we're polling and thus handling key-repeat in software, make sure
to disable idle reports, some keyboards may have these enabled by default
messing up our software keyrepeat.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-06-19 14:33:29 +02:00
Hans de Goede
8454c84af5 usb: kbd: Fix key repeat not always working
The usb-kbd key repeat code assumes that reports get repeated every 40 ms,
this is never true when using CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP, and
does not always works for CONFIG_SYS_USB_EVENT_POLL and
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE since not all usb keyboards honor
the usb_set_idle() command.

For CONFIG_SYS_USB_EVENT_POLL we must use usb_set_idle() since we do a
blocking wait for the hid report, so if we do not tell the keyboard to send
a hid report every 40ms even if nothing changes then we will block u-boot
for 1s (the default u-boot usb interrupt packet timeout). Note that in this
case on keyboards which do not support usb_set_idle() we loose and we actually
get 1s latencies on other u-boot activities.

For the other poll-methods this commit stops using usb_set_idle() and instead
repeats the last received hid-report every 40 ms as long as no new hid-report
is received. This fixes key-repeat not working at all with
CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP and fixes it not working with
keyboards which do not implement usb_set_idle() when using
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-05-29 12:41:05 +02:00
Simon Glass
697033cbf0 dm: usb: Support driver model with USB keyboards
Allow USB keyboards to work with driver model. The main difference is that
we can have multiple buses (each with its own device numbering) and each
bus must be scanned.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:25 -06:00
Simon Glass
603afaf0e5 dm: usb: Split out the keyboard probe into its own function
Before adding driver model support, split out code from this over-long
function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marek Vasut <marex@denx.de>
2015-04-18 11:11:25 -06:00
Hans de Goede
3cbcb28928 usb: Fix usb_kbd_deregister when console-muxing is used
When iomuxing is used we must not only deregister the device with stdio.c,
but also remove the reference to the device in the console_devices array
used by console-muxing. Add a call to iomux_doenv to usb_kbd_deregister to
update console_devices, which will drop the reference.

This fixes the console filling with "Failed to enqueue URB to controller"
messages after a "usb stop force", or when the USB keyboard is gone after a
"usb reset".

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-01-18 12:31:36 +01:00
Hans de Goede
8bb6c1d1e0 usb: Add an interval parameter to create_int_queue
Currently create_int_queue is only implemented by the ehci code, and that
does not honor interrupt intervals, but other drivers which might also want
to implement create_int_queue may honor intervals, so add an interval param.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-01-18 12:31:35 +01:00
Hans de Goede
8e55311983 usb: kbd: Add (optional) support for using an interrupt queue for polling
Waiting an interrupt packet to complete in usb_kbd_poll_for_event, causes
a 40 ms latency for each call to usb_kbd_testc, which is undesirable.

Using control messages leads to lower (but still not 0) latency, but some
devices do not work well with control messages (e.g. my kvm behaves funny
with them).

This commit adds support for using the int_queue mechanism which at least
the ehci-hcd driver supports. This allows polling with 0 latency, while
using interrupt packets.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04 06:04:01 +01:00
Hans de Goede
8f8d7d2451 usb: kbd: Cache pipe, interval and packetsize
Instead of looking them up every time we need them.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04 06:04:00 +01:00
Hans de Goede
dfe5b1c86f usb: kbd: Fix memleak on usb_kbd_deregister()
Free the keyboard hid-report buffer and private data on deregister.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04 06:04:00 +01:00
Hans de Goede
be17e752f3 usb: kbd: Remove unused usb_kbd_generic_poll function
This is not used anywhere, so lets remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-11-04 06:04:00 +01:00
Hans de Goede
8a8a2257ec usb: kbd: Allow "usb reset" to continue when an usb kbd is used
Use the new force parameter to make the stdio_deregister succeed, replacing
stdin with a nulldev, and assume that the usb keyboard will come back after
the reset.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06 14:50:43 +02:00
Hans de Goede
32d019265d stdio: Add force parameter to stdio_deregister
In some cases we really want to move forward with a deregister, add a force
parameter to allow this, and replace the dev with a nulldev in this case.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06 14:50:43 +02:00
Hans de Goede
3f78a28037 usb: kbd: Remove check for already being registered
We now always properly deregister the keyboard before calling
drv_usb_kbd_init(), so we can drop the check for already being registered.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06 14:50:43 +02:00
Hans de Goede
0ea09dfe87 usb: kbd: Do not treat -ENODEV as an error for usb_kbd_deregister
ENODEV menas no usb keyboard was registered, threat this as a successful
usb_kbd_deregister.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06 14:50:42 +02:00
Hans de Goede
9b2393812e usb: kbd: Fix unaligned buffer usage in usb_kbd_setled()
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-10-06 14:50:42 +02:00
Simon Glass
709ea543b9 stdio: Pass device pointer to stdio methods
At present stdio device functions do not get any clue as to which stdio
device is being acted on. Some implementations go to great lengths to work
around this, such as defining a whole separate set of functions for each
possible device.

For driver model we need to associate a stdio_dev with a device. It doesn't
seem possible to continue with this work-around approach.

Instead, add a stdio_dev pointer to each of the stdio member functions.

Note: The serial drivers have the same problem, but it is not strictly
necessary to fix that to get driver model running. Also, if we convert
serial over to driver model the problem will go away.

Code size increases by 244 bytes for Thumb2 and 428 for PowerPC.

22: stdio: Pass device pointer to stdio methods
       arm: (for 2/2 boards)  all +244.0  bss -4.0  text +248.0
   powerpc: (for 1/1 boards)  all +428.0  text +428.0

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
2014-07-23 14:07:23 +01:00
Simon Glass
91d0be1dd8 stdio: Remove redundant code around stdio_register() calls
There is no point in setting a structure's memory to NULL when it has
already been zeroed with memset().

Also, there is no need to create a stub function for stdio to call - if the
function is NULL it will not be called.

This is a clean-up, with no change in functionality.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Vasut <marex@denx.de>
2014-07-23 14:07:23 +01:00
Adrian Cox
08a98b89df usb: Fix USB keyboard polling via control endpoint
USB keyboard polling failed for some keyboards on PowerPC 5020.
This was caused by requesting only 4 bytes of data from keyboards that
produce an 8 byte HID report.

Signed-off-by: Adrian Cox <adrian@humboldt.co.uk>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Marek Vasut <marex@denx.de>
2014-04-30 10:30:57 +02:00
Jim Lin
c95e2b9eae console: usb: kbd: To fix slow TFTP booting
TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.
My previous patch is expected to be put into usb_kbd_testc(). But it went
into usb_kbd_getc() after applied.
This patch is to put change in correct place.

Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26 21:56:35 +02:00
Jim Lin
07551f2343 console: usb: kbd: To improve TFTP booting performance
TFTP booting is slow when a USB keyboard is installed and
stdin has usbkbd added.
This fix is to change Ctrl-C polling for USB keyboard to every second
when NET transfer is running.

Signed-off-by: Jim Lin <jilin@nvidia.com>
2013-08-26 21:56:35 +02:00
Wolfgang Denk
1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Vincent Palatin
5da2dc9789 usb: workaround non-working keyboards.
If the USB keyboard is not answering properly the first request on its
interrupt endpoint, just skip it and try the next one.

This workarounds an issue with a wireless mouse dongle which presents
itself both as a keyboard and a mouse but has a non-functional keyboard
interface.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
(cherry picked from commit 012bbf0ce0301be2482857e3f03b481dd15c2340)
Rebased to upstream/master:
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
2013-06-12 22:22:50 +02:00
Vincent Palatin
09defbc75b usb: properly re-initialize the USB keyboard.
Allow to reconfigure properly the USB keyboard driver when we enumerate
several times the USB devices and its position in the device tree has
changes.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Vincent Palatin <vpalatin@chromium.org>
2013-06-12 22:22:50 +02:00
Vivek Gautam
ceb4972a8f usb: common: Weed out USB_**_PRINTFs from usb framework
USB_PRINTF, USB_HUB_PRINTF, USB_STOR_PRINTF, USB_KBD_PRINTF
are nothing but conditional debug prints, depending on DEBUG.
So better remove them and use debug() simply.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
2013-05-05 23:54:21 +02:00
Allen Martin
4151a400cf USB: add arrow key support to usb_kbd
Check for scancodes for arrow keys and map them to ^F/^B, ^N/^P.
Control characters are used instead of ANSI sequence because the
queueing code in usb_kbd doesn't handle the data increase when one
keypress generates 3 keycodes.  The real fix is to convert this driver
to use the input subsystem and queue, but this allows arrow keys to
work until this driver is converted.

Signed-off-by: Allen Martin <amartin@nvidia.com>
2012-11-20 00:16:06 +01:00
Allen Martin
d7475386bb USB: make usb_kbd obey USB DMA alignment requirements
Change usb_kbd driver to obey alignment requirements for USB DMA on
the buffer used for data transfer.  This is necessary for
architectures that enable dcache and enable USB DMA.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2012-11-20 00:16:05 +01:00
amartin@nvidia.com
f9636e8d38 USB: move keyboard polling into kbd driver
This moves keyboard polling logic from USB HCD drivers into USB
keyboard driver.  Remove usb_event_poll() as keyboard polling was
the only user of this API.  With this patch USB keyboard works with
EHCI controllers again.  Tested on a tegra2 seaboard.

Signed-off-by: Allen Martin <amartin@nvidia.com>
2012-03-03 16:56:29 +01:00
amartin@nvidia.com
fb3ef649ed USB: reevaluate iomux stdin on USB kbd detect
If CONSOLE_MUX is enabled, reevaluate console stdin when USB keyboard
device is detected.

Signed-off-by: Allen Martin <amartin@nvidia.com>
2012-03-03 16:56:22 +01:00
Vincent Palatin
d53da847cf usb: add numeric keypad support to HID driver
When keys are pressed on the numeric keypad, emit key codes for the numbers,
operators, dot and enter.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
2012-03-03 16:56:15 +01:00
Vincent Palatin
3d17308e40 USB: fix USB keyboard polling parameter
When doing a "GET_REPORT" request on the keyboard control endpoint,
the report ID should 0 (ie report ID not used) rather than 1
as reports are not used in boot mode.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
2012-03-03 16:56:09 +01:00
Marek Vasut
5a1219efe9 USB: Drop dead code from usb_kbd.c
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Denk <wd@denx.de>
2011-12-11 14:40:38 +01:00
Marek Vasut
9a8c72a6c4 USB: Rework usb_kbd.c
* Support dynamic allocation of devices
* Passing data via usb device privptr
* Reorder functions to avoid forward declarations
* Introduce generic polling mechanism to fix musb and ehci-hcd breakage
  due to using "extern new;" to access keyboard driver data!

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Denk <wd@denx.de>
2011-12-11 14:40:38 +01:00
Marek Vasut
48c8073ec9 USB: Add functionality to poll the USB keyboard via control EP
This allows the keyboard to avoid requests via Interrupt Endpoint altogether and
run all requests via Control Endpoint. This uses the Get_Report request.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Remy Bohmer <linux@bohmer.net>

Rebased on current code.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
2011-12-11 14:40:38 +01:00
Wolfgang Denk
c4eba6ec5c common/usb_kbd.c: fix bug introduced in commit 00b7d6e
During the rebase of commit 00b7d6e "USB: Squash checkpatch warnings
in usb_kbd.c" I missed a brace, resulting in a number of build errors.
Fix these.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-09 12:09:35 +01:00
Marek Vasut
00b7d6ecc9 USB: Squash checkpatch warnings in usb_kbd.c
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>

Rebased to current code.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-12-09 10:28:26 +01:00
Tom Rix
8f8bd565f3 USB Consolidate descriptor definitions
The header files usb.h and usbdescriptors.h have the same nameed
structure definitions for

usb_config_descriptor
usb_interface_descriptor
usb_endpoint_descriptor
usb_device_descriptor
usb_string_descriptor

These are out right duplicates in usb.h

usb_device_descriptor
usb_string_descriptor

This one has extra unused elements

usb_endpoint_descriptor

	unsigned char	bRefresh
	unsigned char	bSynchAddress;

These in usb.h have extra elements at the end of the usb 2.0
specified descriptor and are used.

usb_config_descriptor
usb_interface_descriptor

The change is to consolidate the definition of the descriptors
to usbdescriptors.h.  The dublicates in usb.h are removed.
The extra element structure will have their name shorted by
removing the '_descriptor' suffix.

So

usb_config_descriptor -> usb_config
usb_interface_descriptor -> usb_interface

For these, the common descriptor elements are accessed now
by an element 'desc'.

As an example

-	if (iface->bInterfaceClass != USB_CLASS_HUB)
+	if (iface->desc.bInterfaceClass != USB_CLASS_HUB)

This has been compile tested on MAKEALL arm, ppc and mips.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
2009-12-20 12:47:37 +01:00