Commit Graph

403 Commits

Author SHA1 Message Date
Michael Walle
be1a6e9425 dm: uclass: don't assign aliased seq numbers
If there are aliases for an uclass, set the base for the "dynamically"
allocated numbers next to the highest alias.

Please note, that this might lead to holes in the sequences, depending
on the device tree. For example if there is only an alias "ethernet1",
the next device seq number would be 2.

In particular this fixes a problem with boards which are using ethernet
aliases but also might have network add-in cards like the E1000. If the
board is started with the add-in card and depending on the order of the
drivers, the E1000 might occupy the first ethernet device and mess up
all the hardware addresses, because the devices are now shifted by one.

Also adapt the test cases to the new handling and add test cases
checking the holes in the seq numbers.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Alex Marginean <alexandru.marginean@nxp.com>
Tested-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Michal Simek <michal.simek@xilinx.com> [on zcu102-revA]
2020-06-11 20:52:11 -06:00
Michael Walle
c03b7612ea usb: provide a device tree node to USB devices
It is possible to specify a device tree node for an USB device. This is
useful if you have a static USB setup and want to use aliases which
point to these nodes, like on the Raspberry Pi.
The nodes are matched against their hub port number, the compatible
strings are not matched for now.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11 20:52:11 -06:00
Jagan Teki
f12f96cfaf sf: Drop spl_flash_get_sw_write_prot
The get_sw_write_prot API is used to get the write-protected
bits of flash by reading the status register and other wards
it's API for reading register bits.

1) This kind of requirement can be achieved using existing
   flash operations and flash locking API calls instead of
   making a separate flash API.
2) Technically there is no real hardware user for this API to
   use in the source tree.
3) Having a flash operations API for simple register read bits
   also make difficult to extend the flash operations.
4) Instead of touching generic code, it is possible to have
   this functionality inside spinor operations in the form of
   flash hooks or fixups for associated flash chips.

Considering all these points, this patch drops the get_sw_write_prot
and associated code bases.

Cc: Simon Glass <sjg@chromium.org>
Cc: Vignesh R <vigneshr@ti.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-01 17:55:24 +05:30
Simon Glass
f91f366bd5 test: Use ut_asserteq_mem() where possible
Quite a few tests still use ut_assertok(memcmp(...)) and variants. Modify
them to use the macro designed for this purpose.

Suggested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-05-19 14:01:47 -04:00
Simon Glass
f7ae49fc4f common: Drop log.h from common header
Move this header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:18 -04:00
Simon Glass
0914011310 command: Remove the cmd_tbl_t typedef
We should not use typedefs in U-Boot. They cannot be used as forward
declarations which means that header files must include the full header to
access them.

Drop the typedef and rename the struct to remove the _s suffix which is
now not useful.

This requires quite a few header-file additions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 18:36:55 -04:00
Simon Glass
e6f6f9e648 common: Drop part.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 17:33:33 -04:00
Tom Rini
1e6d9f515d - Enable USB Host for Odroid-C2 board
- Add Open-Drain/Open-Source emulation in GPIO uclass
 -----BEGIN PGP SIGNATURE-----
 
 iQIyBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAl65b6wACgkQd9zb2sjI
 SdFUiw/3ZDN1HuH7yHgosL4NvfT7o1QojrV9N2+9I0LHej77JUJZgo0o4b3Igkly
 H6RU9niSqfIItjZWd438IJ0srgeSgP33uEJJNaCJaOFIGEdLIBchJ5Q0ExOKMtX+
 wJVT8U9xHE4TkOHPq88K8OebPHhEjfPLNMkR6TjMmNpCEmdTEQlywmcYILRPemKE
 3WHKzYjW31Chx0fJZJ5EmoHfaL8ckU8Jfv/48mraF+lztdfY4vIiHAn62VoyboBW
 ePXTeh+DjvCZDBrxFjiDXtdhJPV8dHFNQrlOmB2zLC2D6JrbsHnV8zOIPdTsQOf5
 zr132ZTJpEPZSdfWn84EeZfxyEPc/rMkB9JzJ6D8OV/X+tqu6xq6NEU0QdYEaKM/
 o6QdAMYb6JkwyJ1UaN6fDVYpspcwO79Eeuhh4lhBq1BMJGIaiN6odFo4XL+zKTWz
 p8fH1ZgAGomHb17MzLp/WC0iWxwlYjzwfYkXjsPHL4CJID2XaZSgCVbYhEynTATZ
 +BZvrddsEh98BejlAESx7tqmBVwsn0y1xmVhXcn82JPkmfPJ+l+R1pFhkhNwyKFv
 rM1g26BBM2viHCHs+Hn3oh3IVbISM+VGk3M+kDgJB4ThD2g1ak1fyD/gU4RvR3CU
 2mQXURuq/6NuMYjz3j8m7GGBAc5FH8p/4l9VvtcKa5HHhstQMA==
 =l5bh
 -----END PGP SIGNATURE-----

Merge tag 'u-boot-amlogic-20200511' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic

- Enable USB Host for Odroid-C2 board
- Add Open-Drain/Open-Source emulation in GPIO uclass
2020-05-12 09:23:15 -04:00
Neil Armstrong
9bf87e256c test: dm: update test for open-drain/open-source emulation in gpio-uclass
Add tests for testing open-drain/open-source emulation in gpio-uclass.
It also adds two test3-gpios configured as GPIO_ACTIVE_LOW.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-11 15:12:56 +02:00
Stefano Babic
b77d0292ca Merge branch 'master' of git://git.denx.de/u-boot 2020-05-10 13:03:56 +02:00
Peng Fan
143f0eeddd test: cpu: test current cpu
Add test whether the CPU is U-Boot is running from.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-03 15:45:49 +02:00
Chunfeng Yun
00c82acfe9 test: dm: phy: add a test item for the phy_bulk API
Add a test item for the phy_bulk API

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-02 12:32:28 +02:00
Chunfeng Yun
bf6ad91629 test: dm: add test item for ofnode_get_child_count()
Add a test item for ofnode_get_child_count()

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
2020-05-02 12:32:28 +02:00
Simon Glass
0b885bcfd9 acpi: Add an acpi command
It is useful to dump ACPI tables in U-Boot to see what has been generated.
Add a command to handle this.

To allow the command to find the tables, add a position into the global
data.

Support subcommands to list and dump the tables.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Simon Glass
b38309b737 acpi: Move the xsdt pointer to acpi_ctx
Put this in the context along with the other important pointers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Simon Glass
7e586f6907 acpi: Put table-setup code in its own function
We always write three basic tables to ACPI at the start. Move this into
its own function, along with acpi_fill_header(), so we can write a test
for this code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-30 17:16:12 +08:00
Simon Glass
29b351122e acpi: Move acpi_add_table() to generic code
Move this code to a generic location so that we can test it with sandbox.
This requires adding a few new fields to acpi_ctx, so drop the local
variables used in the original code.

Also use mapmem to avoid pointer-to-address casts which don't work on
sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Simon Glass
86e1778ded acpi: Convert part of acpi_table to use acpi_ctx
The current code uses an address but a pointer would result in fewer
casts. Also it repeats the alignment code in a lot of places so this would
be better done in a helper function.

Update write_acpi_tables() to make use of the new acpi_ctx structure,
adding a few helpers to clean things up.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Simon Glass
93f7f82782 acpi: Add a method to write tables for a device
A device may want to write out ACPI tables to describe itself to Linux.
Add a method to permit this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30 17:16:12 +08:00
Patrick Delaunay
ff52665d03 test: dm: update test for pins configuration in gpio
Add tests for new API set_dir_flags and set_dir_flags and associated
code in gpio uclass.

Test support for new flags GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE
GPIO_PULL_UP and GPIO_PULL_DOWN.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
e3f3a121d8 gpio: remove the open_drain API and ops
This patch removes the ops get_open_drain/set_open_drain
and the API dm_gpio_get_open_drain/dm_gpio_set_open_drain.

The ops only provided in one driver (mpc8xxx gpio) and the
associated API is never called in boards.

This patch prepare a more generic set/get_dir_flags ops,
including the open drain property.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16 23:06:54 -04:00
Patrick Delaunay
ce891fcada dm: core: add ofnode and dev function to iterate on node property
Add functions to iterate on all property with livetree
- dev_read_first_prop
- dev_read_next_prop
- dev_read_prop_by_prop
and
- ofnode_get_first_property
- ofnode_get_next_property
- ofnode_get_property_by_prop

And helper: dev_for_each_property

For example:
struct ofprop property;

dev_for_each_property(property, config) {
	value = dev_read_prop_by_prop(&property, &propname, &len);

or:

for (res = ofnode_get_first_property(node, &property);
     !res;
     res = ofnode_get_next_property(&property))
{
     value = ofnode_get_property_by_prop(&property, &propname, &len);
....
}

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 23:06:54 -04:00
Tom Rini
f51b4bcf61 Functions for reading indexed values from device tree
Enhancements to 'dm' command
 Log test enhancements and syslog driver
 DM change to read parent ofdata before children
 Minor fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl6YdaMRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYLRwf8C+vKmERVLLcrMZMMiLctbY2kVflJV8zG
 RjFwBcazZDPYjtHqClFZtJyIDYzgkVQRo+QPcdLxjcA+gjSXdteeRa0XTsBTXOZQ
 kbs7yBkL+rCIO2WyXtuyajsmDMQtqM5vYgeBdTeYnJu7NVxwRMYrUqqAKLolNpIN
 SKNYz+a8OEOG2EetbTdwwrmSpNy/cZ3wDGYK25DFTte8/vCZMRBTPiiNSrLp/RsM
 xIojRcLqzARwpvPfFZ8psASKei9+5oIICUrNvwwQGtjepvZwdFQEl90SKaHw8kMf
 sP9rxuqlEN5ec6xnMTUgwfnyBZgNIMSeb4KVPP1rxN2eAa5+bK1OlQ==
 =gyyY
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-10apr20-take2' of git://git.denx.de/u-boot-dm

Functions for reading indexed values from device tree
Enhancements to 'dm' command
Log test enhancements and syslog driver
DM change to read parent ofdata before children
Minor fixes
2020-04-16 13:45:03 -04:00
Simon Glass
b0dcc87106 dm: core: Read parent ofdata before children
At present a device can read its ofdata before its parent has done the
same. This can cause problems in the case where the parent has a 'ranges'
property, thus affecting the operation of dev_read_addr(), for example.

We already probe parent devices before children so it does not seem to be
a large step to do the same with ofdata.

Make the change and update the documentation in this area.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-04-16 08:07:58 -06:00
Laurentiu Tudor
528d6b37ae test: fdtdec: test fdtdec_set_carveout()
Add a new test for fdtdec_set_carveout().

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Drop blank line at EFO:
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Dario Binacchi
4bb7075c83 dm: core: support reading a single indexed u32 value
The patch adds helper functions to allow reading a single indexed u32
value from a device-tree property containing multiple u32 values, that
is an array of integers.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Dario Binacchi
70573c6c46 dm: test: add test case for dev_read_u64 function
Add test case to cover dev_read_u64 and dev_read_u64_default functions.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:58 -06:00
Patrick Delaunay
0544ecbfe9 dm: core: Move "/chosen" and "/firmware" node scan
Use the new function dm_scan_fdt_ofnode_path() to scan all the nodes
which aren't devices themselves but may contain some:
- "/chosen"
- "/clocks"
- "/firmware"

The patch removes the strcmp call in recursive function dm_scan_fdt_live()
and also corrects a conflict with the 2 applied patches in
the commit 1712ca2192 ("dm: core: Scan /firmware node by default")
and in the commit 747558d014 ("dm: fdt: scan for devices under
/firmware too"): the subnodes of "/firmware" (optee for example)
are bound 2 times.

For example the dm tree command result on STM32MP1 is:

STM32MP> dm tree
 Class     Index  Probed  Driver                Name
 -----------------------------------------------------------
 root          0  [ + ]   root_driver           root_driver
 firmware      0  [   ]   psci                  |-- psci
 sysreset      0  [   ]   psci-sysreset         |   `-- psci-sysreset
 simple_bus    0  [ + ]   generic_simple_bus    |-- soc
...
 tee           0  [ + ]   optee                 |-- optee
...
 tee           1  [   ]   optee                 `-- optee

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16 08:07:57 -06:00
Simon Glass
bfeb5d460c acpi: Add support for DMAR
The DMA Remapping Reporting (DMAR) table contains information about DMA
remapping.

Add a version simple version of this table with only the minimum fields
filled out. i.e. no entries.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-16 14:36:28 +08:00
Simon Glass
91fe8b79f6 acpi: Add a central location for table version numbers
Each ACPI table has its own version number. Add the version numbers in a
single function so we can keep them consistent and easily see what
versions are supported.

Start a new acpi_table file in a generic directory to house this function.
We can move things over to this file from x86 as needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-16 14:36:28 +08:00
Simon Glass
f50cc95288 acpi: Add a simple sandbox test
Add a sandbox test for the basic ACPI functionality we have so far.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-16 14:36:28 +08:00
Simon Glass
600f584d81 cpu: Support querying the address width
Different CPUs may support different address widths, meaning the amount of
memory they can address. Add a property for this to the cpu_info struct.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-16 14:36:28 +08:00
Andy Shevchenko
bf4661bcb0 dm: serial: Add clock member to struct serial_device_info
Some callers of serial_getinfo() would like to know the UART base
clock speed in order to make decision what to pass to OS in some
cases. In particular, ACPI SPCR table expects only certain base
clock speed and thus we have to act accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-16 14:36:28 +08:00
Tom Rini
9a8942b53d sandbox conversion to SDL2
TPM TEE driver
 Various minor sandbox video enhancements
 New driver model core utility functions
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl48iogACgkQfxc6PpAI
 reaVzAf/an3/yKe6r3CVWlcRV6H/dVg1ApnnLpX7jS0p0b++oCVvOiy7z1WPXj3k
 b1SSgENDeeZ/8EHio+Gf7ZidH/TGEj7L6YEFwd1t60GMkZiWEkNf4Z53tw482YG+
 96hoPD+ySTW+ddIdVHWAFG2I4aEiKHANJAp/ItNdD+rLbrEwNQy+eiK5JTOk80B6
 /X8AJCLZeAC1s7vs+2+WolgjT78QGzA9HHalMiublcqh0ivKKk0QeQiOKKPe8JYJ
 om5YY1TxayQ60Xmo5f39/SBfzEEklxw83sU9o1tBeYzyVUpu7fQdkxiDbWdsij77
 DgwLdeYQJGbN+hdSWE0gjTqyhW+lWA==
 =KRoA
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-6feb20' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm

sandbox conversion to SDL2
TPM TEE driver
Various minor sandbox video enhancements
New driver model core utility functions
2020-02-11 10:58:41 -05:00
Simon Glass
025543554c dm: irq: Add support for requesting interrupts
At present driver model supports the IRQ uclass but there is no way to
request a particular interrupt for a driver.

Add a mechanism, similar to clock and reset, to read the interrupts
required by a device from the device tree and to request those interrupts.

U-Boot itself does not have interrupt-driven handlers, so just provide a
means to read and clear an interrupt. This can be useful to handle
peripherals which must use an interrupt to determine when data is
available, for example.

Bring over the basic binding file as well, from Linux v5.4. Note that the
older binding is not supported in U-Boot; the newer 'special form' must be
used.

Add a simple test of the new functionality.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07 22:46:32 +08:00
Simon Glass
ba87607971 dm: irq: Add support for interrupt controller types
There can be different types of interrupt controllers in a system and some
drivers may need to distinguish between these. In general this can be
handled using the device tree by adding the interrupt information to
device nodes.

However on x86 devices we have interrupt controllers which are not tied
to any particular device and not really used in U-Boot. These still need
to be inited, so a convenient method is to give each controller a type
and allow a particular controller type to be probed.

Add support for this in sandbox along with a test.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: remove the new bland line at EOF of test/dm/irq.c]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07 22:44:59 +08:00
Simon Glass
50162348f0 dm: core: Add a function to find a device by drvdata
It is sometimes useful to find a device in a uclass using only its driver
data. The driver data often indicates the 'subtype' of the device, e,g,
via its compatible string.

Add a function to handle this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07 22:41:24 +08:00
Simon Glass
3cf0fba4ff dm: core: Allow iterating devices without uclass_get()
At present we have uclass_foreach_dev() which requires that uclass_get()
be called beforehand to find the uclass. This is good if we suspect that
that function might fail, but often we know that the uclass is available.

Add a new helper which does this uclass_get() automatically, so that only
the uclass ID is needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-02-07 22:41:24 +08:00
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
61b29b8268 dm: core: Require users of devres to include the header
At present devres.h is included in all files that include dm.h but few
make use of it. Also this pulls in linux/compat which adds several more
headers. Drop the automatic inclusion and require files to include devres
themselves. This provides a good indication of which files use devres.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
2020-02-05 19:33:46 -07:00
Simon Glass
3062cd17af sound: Add a new stop_play() method
At present there is no positive indication that U-Boot has finished
sending sound data. This means that it is not possible to power down an
audio codec, for example. Add a new method that is called once all sound
data has been sent.

Add a new method for this, called when the sound_play() call is done.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
cfccff8000 test: Enable console recording in tests
At present we reset the console buffer before each test but do not
actually set the recording flag. Without this, the output is not
recorded.

Update the code to set the flag before the test and clear it afterwards.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Simon Glass
903e83ee84 dm: core: Add a way to iterate through children, probing each
It is sometimes useful to process all children, making sure they are
probed first. Add functions to help with this and a macro to make it more
convenient.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:45 -07:00
Simon Glass
f262d4ca4b dm: core: Add a way to read platdata for all child devices
When generating ACPI tables we need to make sure that all devices have
read their platform data, so that they can generate the tables correctly.

Rather than adding this code in ACPI, create a core function to handle it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:45 -07:00
Simon Glass
bd933bfd83 dm: core: Add ofnode_get_chosen_prop()
Add a function to read a property from the chosen node, providing access
to its length. Update ofnode_get_chosen_string() to make use of it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:45 -07:00
Simon Glass
a8167d8ee2 dm: core: Add ofnode_read_prop()
Add a new function to read a property that supports reading the length as
well.

Reimplement ofnode_read_string() using it and fix its comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:45 -07:00
Simon Glass
14ca9f7f5a dm: core: Rename ofnode_get_chosen_prop()
This function is actually intended to read a string rather than a
property. All of its current callers use it that way. Also there is no way
to return the length of the property from this function.

Rename it to better indicate its purpose, using ofnode_read as the prefix
since this matches most other functions.

Also add some tests which are missing for these functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:45 -07:00
Bin Meng
bfcd9298b2 test: dm: spi: Fix sandbox dm_test_spi_find()
Per sandbox_cs_info(), sandbox spi controller only supports chip
select 0. Current test case tries to locate devices on chip select
1, and any call to spi_get_bus_and_cs() or spi_cs_info() with cs
number 1 should not return 0.

This updates the test case to handle it correctly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-01-27 22:27:21 +05:30
Tom Rini
d6b92b9742 dm: Increased separation of ofdata_to_platdata() and probe methods
-----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl4WGTURHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreaB9wf+P/DA1udn1JKSL7sGkqzXlWGtC6qTU5eY
 em6GpotS3BiJx40vvKCYc1LbVbVEwXNKvs0AcxvqTxA+9ZiNAFERjbtmxPaqFUHe
 +vBcqTkYOSOIoSkWTAK+leqVirfGQULdLhITI7sHoF+37UbsDKlSlHjHQZ4XL9Xn
 fey1eGNaT+QThJ23GTZtZJAHUzoK870+qUhkqifUdHpvnxOJ/j75/AU7zNYlJJHW
 12H3DqeoBRnQU0sPsyY/4Bm0e5+GalYMS9XCcWKxxFqPh7/NQoV7Z7yqvKsm7KXc
 2VsZk8D+3lU4486JKpfOeCcdUCfgNPSR35AQwQttzNNc9nfYJRpfxA==
 =56sP
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dm

dm: Increased separation of ofdata_to_platdata() and probe methods
2020-01-09 08:52:21 -05:00
Tom Rini
7086de4948 Pull request for UEFI sub-system for efi-2020-04-rc1
This pull request provides:
 
 * support for FIT images for UEFI binaries
 * drivers for hardware random number generators
 * an implementation of the EFI_RNG_PROTOCOL
 * a sub-command for efidebug to display configuration tables
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl4UvR4ACgkQxIHbvCwF
 GsRJZhAAmlsRBUS3fvFV5GtB8bkWcSU4/s3TVYJui0fOhY02ZDIKkrubZzDx/Lgv
 9OaVwjQ3JSmq5XkDmXqzNDzYkxitQ5Qf/cFiBF5HpA3USkOttb3GIfgj0qD6DGzM
 cKyhgJm7bZoMN/mkIzkWsry1ASwYpB3ipyoJAfRfryw9ok4j9RfJ7pPieeycGWGJ
 0sZsJI0v7e6xt5Qsytk5sZNvlCFhyhl2OMYliAlRKBryh31Ahr2e6KEwsJh7VyCP
 4K12eBTqIJq1qHk7Lr0g1CnMCdeOT8J7qvX1+kvt3HupxTMkYRv2AR5CQWRKck5E
 RsmcKmiTHz/76w6Gk7kLan7y0UCSHnfHQ3aSEkkx4O/v4OC85VteyLAEriS7J9Hx
 xSNyoj01U2wG3SLrUjkAZv6JgyC8uCezRzOHOqN25Q2mRROVq781mcMfRXwdq6cD
 L4rrTsIDPzNF19wDa7P5tK6JMF8BDifLNuMTQj5LdJYMHJTJZBWG/vTNFPEldaIP
 D9RPoCibTolpiuCYneeXJURHGm5yme7KoxAPiMU+fAWO1F6SO25zxYA7MAiY4OYw
 zk7Ipaat0luIu1gC2ICYxrLnsMBq9glABrdq99i0DpUg9n9N/7SpcJSj2DMrFGmY
 u4yenWM1KTgjLoVHRhpTbCzF15GlYN4SHXV5iYO+Pof5WQYnv8w=
 =SjPV
 -----END PGP SIGNATURE-----

Merge tag 'efi-2020-04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2020-04-rc1

This pull request provides:

* support for FIT images for UEFI binaries
* drivers for hardware random number generators
* an implementation of the EFI_RNG_PROTOCOL
* a sub-command for efidebug to display configuration tables
2020-01-08 18:57:11 -05:00