Commit Graph

1562 Commits

Author SHA1 Message Date
Simon Glass
b8db1c1388 x86: Correct regwidth prompt in cbsysinfo
This should be 'regwidth', not 'baud'. Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-05-10 13:56:12 +08:00
Tom Rini
07b53103b7 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2021-05-07 08:57:32 -04:00
Heinrich Schuchardt
91e4b7516d cmd/exception: support ebreak exception on RISC-V
The ebreak instruction should generate a breakpoint exception.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2021-05-05 16:13:12 +08:00
Farhan Ali
653cd92d66 cmd: gpt: Add option to write GPT partitions to environment variable
This change would enhance the existing 'gpt read' command to allow
(optionally) writing of the read GPT partitions to an environment
variable in the UBOOT partitions layout format. This would allow users
to easily change the overall partition settings by editing said variable
and then using the variable in the 'gpt write' and 'gpt verify' commands.

Signed-off-by: Farhan Ali <farhan.ali@broadcom.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Corneliu Doban <cdoban@broadcom.com>
Cc: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-04 12:52:46 -04:00
Tom Rini
f3a0d2c1af Xilinx changes for v2021.07-rc2
xilinx:
 - Enable saving variables based on bootmode
 - Cleanup usb dfu setup and wire it up with usb bootmode
 - Fix bootscript address logic
 - Remove GD references (spi, Versal)
 - Enable capsule update
 
 clk:
 - Small Kconfig fix
 
 net:
 - Fix gmii2rgmii bridge binding
 
 usb:
 - Propagate error (dfu gadget)
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYIqrgAAKCRDKSWXLKUoM
 IY86AJ9X9G6IwfnhHFWhManDrzPoBGaSBwCfVjMzPQcCddlGAW8UJ1NaPCLPPNc=
 =ACHF
 -----END PGP SIGNATURE-----

Merge tag 'xilinx-for-v2021.07-rc2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze

Xilinx changes for v2021.07-rc2

xilinx:
- Enable saving variables based on bootmode
- Cleanup usb dfu setup and wire it up with usb bootmode
- Fix bootscript address logic
- Remove GD references (spi, Versal)
- Enable capsule update

clk:
- Small Kconfig fix

net:
- Fix gmii2rgmii bridge binding

usb:
- Propagate error (dfu gadget)
2021-04-29 11:31:06 -04:00
Igal Liberman
e49cdbe10b phy: marvell: add RX training command
This patch adds support for running RX training using new command called
"rx_training"
Usage:
rx_training - rx_training <cp id> <comphy id>

RX training allows to improve link quality (for SFI mode)
by running training sequence between us and the link partner,
this allows to reach better link quality then using static configuration.

Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
2021-04-29 07:45:24 +02:00
Konstantin Porotchkin
9f27bcc32f cmd/mvebu: fix the bubt command
- fix the dependency for MMC boot (add XENON to MVEBU_MMC)
- fix the bubt destination assignment (missing # in "else" case)

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-29 07:39:15 +02:00
Michal Simek
74fe3f2ef3 cmd: dfu: Propagate error if dfu gadget fails
On systems without usb gadget dfu core fails which was reported by error
but command itself returns pass which breaks any usage in a script.
That's why propagate error from run_usb_dnl_gadget().

Fixes: 16297cfb2a ("usb: new board-specific USB init interface")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-04-23 08:45:55 +02:00
Joel Peshkin
4e9bce1243 Add support for stack-protector
Add support for stack protector for UBOOT, SPL, and TPL
as well as new pytest for stackprotector

Signed-off-by: Joel Peshkin <joel.peshkin@broadcom.com>

Adjust UEFI build flags.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-20 07:31:12 -04:00
Igor Opaniuk
a6713b3a3c sysreset: provide type of reset in do_reset cmd
Add additional param for reset cmd, which provides type of reset.

Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-04-20 07:31:12 -04:00
Heinrich Schuchardt
ec611871f3 cmd: CONFIG_CMD_MMC depends on CONFIG_MMC
Trying to compile with CONFIG_CMD_MMC=y and CONFIG_MMC=n leads to errors:

riscv64-linux-gnu-ld.bfd: cmd/built-in.o: in function `do_mmcops':
cmd/mmc.c:984: undefined reference to `get_mmc_num'
riscv64-linux-gnu-ld.bfd: cmd/built-in.o: in function `do_mmc_setdsr':
cmd/mmc.c:873: undefined reference to `find_mmc_device'

Add missing dependency.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-20 07:31:12 -04:00
Marek Vasut
8c4e3b79bd cmd: exit: Fix return value
In case exit is called in a script without parameter, the command
returns -2 ; in case exit is called with a numerical parameter,
the command returns -2 and lower. This leads to the following problem:
=> setenv foo 'echo bar ; exit 1' ; run foo ; echo $?
bar
0
=> setenv foo 'echo bar ; exit 0' ; run foo ; echo $?
bar
0
=> setenv foo 'echo bar ; exit -2' ; run foo ; echo $?
bar
0
That is, no matter what the 'exit' command argument is, the return
value is always 0 and so it is not possible to use script return
value in subsequent tests.

Fix this and simplify the exit command such that if exit is called with
no argument, the command returns 0, just like 'true' in cmd/test.c. In
case the command is called with any argument that is positive integer,
the argument is set as return value.
=> setenv foo 'echo bar ; exit 1' ; run foo ; echo $?
bar
1
=> setenv foo 'echo bar ; exit 0' ; run foo ; echo $?
bar
0
=> setenv foo 'echo bar ; exit -2' ; run foo ; echo $?
bar
0

Note that this does change ABI established in 2004 , although it is
unclear whether that ABI was originally OK or not.

Fixes: c26e454dfc
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Tom Rini <trini@konsulko.com>
2021-04-12 17:45:40 -04:00
Asherah Connor
5b0b43e0e2 x86: qemu: move QFW to its own uclass
We move qfw into its own uclass and split the PIO functions into a
specific driver for that uclass.  The PIO driver is selected in the
qemu-x86 board config (this covers x86 and x86_64).

include/qfw.h is cleaned up and documentation added.

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-12 17:44:55 -04:00
Asherah Connor
ac3821430e terminal: only serial_reinit_all if available
serial_reinit_all() is only available if CONFIG_SERIAL is defined (i.e.
!CONFIG_DM_SERIAL).

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12 17:44:55 -04:00
Asherah Connor
5c935eb6f7 terminal: correct stdio_dev invocations
stdio_dev methods have taken a pointer to themselves since 709ea543
(nearly 7 years ago).

Signed-off-by: Asherah Connor <ashe@kivikakk.ee>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-04-12 17:44:55 -04:00
Sean Anderson
b935d19066 cmd: xtrace: Convert to bool
This variable is a boolean, not a string.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-12 17:17:11 -04:00
Heinrich Schuchardt
d473063d9d efi_loader: simplify efi_get_device_path_text()
Replace static function efi_get_device_handle_info() by a simplified
function efi_get_device_path_text() avoiding EFI_CALL().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-10 12:00:24 +02:00
Aymen Sghaier
2532429b16 crypto: Add blob command support for i.MX8M platforms
This patch enable blob command for mScale platforms.

Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Franck LENORMAND
88e7f5be38 imx7ulp: Enable support for cmd blob
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
81d5605a86 cmd: blob: Instantiate RNG before running CMD_BLOB
U-Boot can instantiate CAAM RNG if needed by crypto operations.
Call sec_init() prior running a blob operation to ensure
RNG is correctly instantiated.

Make sure CAAM clock is enabled and check if a job ring is
available for that operation.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Breno Lima
4e682d555d cmd: blob: Add IMX_HAB and CAAM supported SoCs as dependency
In order to build CMD_BLOB on i.MX CAAM supported devices it's
necessary to select IMX_HAB. Add IMX_HAB and CAAM supported
SoCs as dependency.

Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-04-08 09:18:29 +02:00
Jaehoon Chung
e9978b17cd cmd: mmc: check whether bootbus's arguments is valid or not
According to Specification, each bit have valid value.
But it doesn't check whether arguments is valid or not.
It has potential bug with arguments passed by wrong value.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06 18:08:26 +08:00
Jaehoon Chung
8ae82c4b12 cmd: mmc: modify more readable about hwpartition usage
Modified more readable about hwpartition usage.
Because it's difficult to understand how to use its command.
The arguments didn't optional.
mmc hwpartition needs to pass <USER> <GP> <MODE> as arguments.
Description about each arguments what is required is the below:
 USER - <user> <enh> <start> <cnt> <wrrel> <{on|off}>
 GP   - <{gp1|gp2|gp3|gp4}> <cnt> <enh> <wrrel> <{on|off}>
 MODE - <{check|set|complete}>

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06 18:08:14 +08:00
Tom Rini
90eba245a6 Merge branch 'next' 2021-04-05 11:29:57 -04:00
Heinrich Schuchardt
7823ba3397 cmd: CMD_USB depends on USB
The usb command cannot be compiled with CONFIG_USB=n:

ld.bfd: cmd/usb.c:660: undefined reference to `usb_stop'
ld.bfd: cmd/usb.c:663: undefined reference to `usb_started'

Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-04-04 16:06:25 -04:00
Simon Glass
1758551ec9 sandbox: Provide a way to bind fixed/removeable devices
At present when a file is bound to a host device it is always marked as
removeable. Arguably the device is removeable, since it can be unbound at
will. However while it is bound, it is not considered removable by the
user. Also it is useful to be able to model both fixed and removeable
devices for code that distinguishes them.

Add a -r flag to the 'host bind' command and plumb it through to provide
this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:31 +13:00
Simon Glass
803e9c1c94 sandbox: Update do_host_bind() argument counting
Remove the 'bind' subcommand before processing the arguments. This will
make it easier to add an optional flag.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:31 +13:00
Simon Glass
1503c2c790 sandbox: Disintangle declarations in do_host_bind()
This function has a strange mix of declarations and argument parsing
which is a bit hard to follow and harder to modify. Separate out the
declarations at the start of the function and adjust the ordering of
the code slightly.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:31 +13:00
Simon Glass
907bcd3a33 cmd: Add missing check for CONFIG_SYS_LONGHELP
Two commands are missing this check, so compilation fails when building
without CONFIG_CMDLINE. Add it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:30 +13:00
Simon Glass
71cebf0b59 x86: Add a command to display coreboot sysinfo
This information is interesting to look at and can be important for
debugging and inspection. Add a command to display it in a helpful
format.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 15:04:30 +13:00
Simon Glass
e35b6497f4 x86: Make coreboot sysinfo available to any x86 board
It is possible to boot U-Boot for chromebook_coral either 'bare metal' or
from coreboot. In the latter case we want to provide access to the coreboot
sysinfo tables. Move the definitions into a file available to any x86
board.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-27 13:59:37 +13:00
Jose Marinho
aa31a87d7a cmd: efi: ESRT table debug print
This commit enables the ESRT printing from the u-boot shell by invoking:
- efidebug capsule esrt

CC: Heinrich Schuchardt	<xypron.glpk@gmx.de>
CC: Sughosh Ganu <sughosh.ganu@linaro.org>
CC: AKASHI Takahiro <takahiro.akashi@linaro.org>
CC: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CC: Andre Przywara <andre.przywara@arm.com>
CC: Alexander Graf <agraf@csgraf.de>
CC: nd@arm.com

Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Reviwed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-25 20:19:42 +01:00
Jose Marinho
64a8aae15c efi: Add ESRT to the EFI system table
The ESRT is initialised during efi_init_objlist after
efi_initialize_system_table().

The ESRT is recreated from scratch at the following events:
- successful UpdateCapsule;
- FMP instance install.

The code ensures that every ESRT entry has a unique fw_class value.

Limitations:
- The ESRT is not updated if an FMP instance is uninstalled;
- the fields image_type and flags are in the current implementation left
undefined. Setting these values will require a per-platform function
that returns the image_type/flags as a function of the image fw_class.

CC: Heinrich Schuchardt	<xypron.glpk@gmx.de>
CC: Sughosh Ganu <sughosh.ganu@linaro.org>
CC: AKASHI Takahiro <takahiro.akashi@linaro.org>
CC: Ilias Apalodimas <ilias.apalodimas@linaro.org>
CC: Andre Przywara <andre.przywara@arm.com>
CC: Alexander Graf <agraf@csgraf.de>
CC: nd@arm.com
Signed-off-by: Jose Marinho <jose.marinho@arm.com>

Remove two EFI_CALL() indirections.
Move ESRT GUID in efidebug's list of GUIDs.

Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-25 20:19:19 +01:00
Ilias Apalodimas
cbea241e93 efidebug: add multiple device path instances on Boot####
The UEFI spec allows a packed array of UEFI device paths in the
FilePathList[] of an EFI_LOAD_OPTION. The first file path must
describe the loaded image but the rest are OS specific.

Previous patches parse the device path and try to use the second
member of the array as an initrd. So let's modify efidebug slightly
and install the second file described in the command line as the
initrd device path.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-03-25 20:14:26 +01:00
Ilias Apalodimas
53f6a5aa86 efi_loader: Replace config option for initrd loading
Up to now we install EFI_LOAD_FILE2_PROTOCOL to load an initrd
unconditionally. Although we correctly return various EFI exit codes
depending on the file status (i.e EFI_NO_MEDIA, EFI_NOT_FOUND etc), the
kernel loader, only falls back to the cmdline interpreted initrd if the
protocol is not installed.

This creates a problem for EFI installers, since they won't be able to
load their own initrd and continue the installation. It also makes the
feature hard to use, since we can either have a single initrd or we have
to recompile u-boot if the filename changes.

So let's introduce a different logic that will decouple the initrd
path from the config option we currently have.
When defining a UEFI BootXXXX we can use the filepathlist and store
a file path pointing to our initrd. Specifically the EFI spec describes:

"The first element of the array is a device path that describes the device
and location of the Image for this load option. Other device paths may
optionally exist in the FilePathList, but their usage is OSV specific"

When the EFI application is launched through the bootmgr, we'll try to
interpret the extra device path. If that points to a file that exists on
our disk, we'll now install the load_file2 and the efi-stub will be able
to use it.

This opens up another path using U-Boot and defines a new boot flow.
A user will be able to control the kernel/initrd pairs without explicit
cmdline args or GRUB.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-25 20:14:26 +01:00
Heinrich Schuchardt
7dbd7dd399 cmd/load: support uploading EFI binary via UART
When uploading an EFI binary via the UART we have to call
efi_set_bootdev() or we won't be able to execute it.

Put the includes into alphabetic order.

Fixes: 5f59518a7b ("efi_loader: setting boot device")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-25 20:12:49 +01:00
Simon Glass
df7d89a6fc efi: Fix compiler warnings
This occur when building on Raspberry Pi 400 (32-bit ARM). Fix them.

Examples:

cmd/efidebug.c: In function ‘do_efi_capsule_update’:
cmd/efidebug.c:75:49: warning: cast from pointer to integer of different
	size [-Wpointer-to-int-cast]
  ret = EFI_CALL(RT->update_capsule(&capsule, 1, (u64)NULL));
                                                 ^
include/efi_loader.h:104:9: note: in definition of macro ‘EFI_CALL’
  typeof(exp) _r = exp; \
         ^~~
cmd/efidebug.c:75:49: warning: cast from pointer to integer of different
	size [-Wpointer-to-int-cast]
  ret = EFI_CALL(RT->update_capsule(&capsule, 1, (u64)NULL));
                                                 ^
include/efi_loader.h:104:19: note: in definition of macro ‘EFI_CALL’
  typeof(exp) _r = exp; \
                   ^~~

In file included from include/common.h:20,
                 from lib/efi_loader/efi_capsule.c:9:
lib/efi_loader/efi_capsule.c: In function ‘efi_update_capsule’:
include/efi_loader.h:83:8: warning: format ‘%lu’ expects argument of type
	‘long unsigned int’, but argument 10 has type ‘size_t’
	{aka ‘unsigned int’} [-Wformat=]
  debug("%sEFI: Entry %s(" format ")\n", __efi_nesting_inc(), \
        ^~~~~~~~~~~~~~~~~~
include/linux/printk.h:37:21: note: in definition of macro ‘pr_fmt’
 #define pr_fmt(fmt) fmt
                     ^~~
include/log.h:229:2: note: in expansion of macro ‘log’
  log(LOG_CATEGORY, LOGL_DEBUG, fmt, ##args); \
  ^~~
include/log.h:249:2: note: in expansion of macro ‘debug_cond’
  debug_cond(_DEBUG, fmt, ##args)
  ^~~~~~~~~~
include/efi_loader.h:83:2: note: in expansion of macro ‘debug’
  debug("%sEFI: Entry %s(" format ")\n", __efi_nesting_inc(), \
  ^~~~~
lib/efi_loader/efi_capsule.c:444:2: note: in expansion of macro ‘EFI_ENTRY’
  EFI_ENTRY("%p, %lu, %llu\n", capsule_header_array, capsule_count,
  ^~~~~~~~~
lib/efi_loader/efi_capsule.c:444:19: note: format string is defined here
  EFI_ENTRY("%p, %lu, %llu\n", capsule_header_array, capsule_count,
                 ~~^
                 %u

Signed-off-by: Simon Glass <sjg@chromium.org>
Replace (uintptr_t)NULL by 0.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-25 20:08:41 +01:00
Heinrich Schuchardt
76b0a19022 cmd/load: support uploading EFI binary via UART
When uploading an EFI binary via the UART we have to call
efi_set_bootdev() or we won't be able to execute it.

Put the includes into alphabetic order.

Fixes: 5f59518a7b ("efi_loader: setting boot device")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-19 20:54:55 +01:00
Simon Glass
64d809b4cb efi: Fix compiler warnings
This occur when building on Raspberry Pi 400 (32-bit ARM). Fix them.

Examples:

cmd/efidebug.c: In function ‘do_efi_capsule_update’:
cmd/efidebug.c:75:49: warning: cast from pointer to integer of different
	size [-Wpointer-to-int-cast]
  ret = EFI_CALL(RT->update_capsule(&capsule, 1, (u64)NULL));
                                                 ^
include/efi_loader.h:104:9: note: in definition of macro ‘EFI_CALL’
  typeof(exp) _r = exp; \
         ^~~
cmd/efidebug.c:75:49: warning: cast from pointer to integer of different
	size [-Wpointer-to-int-cast]
  ret = EFI_CALL(RT->update_capsule(&capsule, 1, (u64)NULL));
                                                 ^
include/efi_loader.h:104:19: note: in definition of macro ‘EFI_CALL’
  typeof(exp) _r = exp; \
                   ^~~

In file included from include/common.h:20,
                 from lib/efi_loader/efi_capsule.c:9:
lib/efi_loader/efi_capsule.c: In function ‘efi_update_capsule’:
include/efi_loader.h:83:8: warning: format ‘%lu’ expects argument of type
	‘long unsigned int’, but argument 10 has type ‘size_t’
	{aka ‘unsigned int’} [-Wformat=]
  debug("%sEFI: Entry %s(" format ")\n", __efi_nesting_inc(), \
        ^~~~~~~~~~~~~~~~~~
include/linux/printk.h:37:21: note: in definition of macro ‘pr_fmt’
 #define pr_fmt(fmt) fmt
                     ^~~
include/log.h:229:2: note: in expansion of macro ‘log’
  log(LOG_CATEGORY, LOGL_DEBUG, fmt, ##args); \
  ^~~
include/log.h:249:2: note: in expansion of macro ‘debug_cond’
  debug_cond(_DEBUG, fmt, ##args)
  ^~~~~~~~~~
include/efi_loader.h:83:2: note: in expansion of macro ‘debug’
  debug("%sEFI: Entry %s(" format ")\n", __efi_nesting_inc(), \
  ^~~~~
lib/efi_loader/efi_capsule.c:444:2: note: in expansion of macro ‘EFI_ENTRY’
  EFI_ENTRY("%p, %lu, %llu\n", capsule_header_array, capsule_count,
  ^~~~~~~~~
lib/efi_loader/efi_capsule.c:444:19: note: format string is defined here
  EFI_ENTRY("%p, %lu, %llu\n", capsule_header_array, capsule_count,
                 ~~^
                 %u

Signed-off-by: Simon Glass <sjg@chromium.org>
Replace (uintptr_t)NULL by 0.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-03-16 09:37:04 +01:00
Tom Rini
22fc991daf Prepare v2021.04-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmBPhiUACgkQFHw5/5Y0
 tywChgv/RYpdSKrD5s4kCJnImfOwDznESj/CqAQK3Au5zviq7qXRrgxyTKv2e1wM
 W51vUBd0cE1YTACXqbr92wSSyqoTthLqd57KQgVele5uC2dvkqVTSvjPOUwtyIbQ
 BTPkoQnHPn30AILRdPjpEdBGfZhJDDtJFdQopn6h4GjEjPKVH8Wx1Dd+V6SD5f20
 WiksUjgdjMr1AmORY+LdwwJO8FZrGGPYgs8CDtiqxmCSwh3d7kUFFTT+G23BZdo7
 M+81+1uIUaW2Bolds7ZTPrrjr8bPwkWoTqNYhUB4bNPLp72gwnjM1rtU1X3hyiJM
 MdxSBimLHUOYPihfeSYCHSUrJaQFAAEFkuzWfZN1fgoswKEZQIVVVTzT/TomTyqf
 1DIXD+0HpXGKgVLW/Nkpl4D+UFjR865XI4kiuDxddjKI7bGbvDlbZ/k3PNelD7op
 umUswHnC3OTSw/g+A9VH/zf1rMFNLfu++vD7XJtdoWlcsl6x6/6Fh75tuC6K/X0K
 caPmehD3
 =ENym
 -----END PGP SIGNATURE-----

Merge tag 'v2021.04-rc4' into next

Prepare v2021.04-rc4
2021-03-15 12:15:38 -04:00
Jorge Ramirez-Ortiz
26839e5dde cmd: SCP03: enable and provision command
Enable and provision the SCP03 keys on a TEE controlled secured elemt
from the U-Boot shell.

Executing this command will generate and program new SCP03 encryption
keys on the secure element NVM.

Depending on the TEE implementation, the keys would then be stored in
some persistent storage or better derived from some platform secret
(so they can't be lost).

Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
2021-03-13 13:14:52 -05:00
Simon Glass
9586a48173 tpm: Don't select LOG
We don't need to enable logging to run this command since the output will
still appear. Drop the 'select'.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-12 17:41:35 -05:00
Bin Meng
05173eca33 cmd: Fix virtio command dependency
The 'virtio' command calls blk_common_cmd() which is only available
when CONFIG_HAVE_BLOCK_DEVICE is on. Fix the Kconfig dependency.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Bin Meng
56d0635f18 cmd: Add a command to display the address map
This adds a new command 'addrmap' to display the address map for
non-identity virtual-physical memory mappings.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-03-05 10:25:43 +05:30
Simon Glass
d6a885f087 tpm: Switch TPMv1 over to use the new API
Take over the plain 'tpm_...' functions for use by the new TPM API. Rename
all the TPMv1 functions so they are called from the API.

Update the TPMv1 functions so that they are called from the API. Change
existing users to use the tpm1_ prefix so they don't need to go through
the API, which might introduce uncertainty.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-03-02 15:53:37 -05:00
Harald Seiler
35b65dd8ef reset: Remove addr parameter from reset_cpu()
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to.  This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value.  Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.

Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g.  COLD vs WARM resets).  As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).

To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely.  Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.

This transformation was done with the following coccinelle patch:

    @@
    expression argvalue;
    @@
    - reset_cpu(argvalue)
    + reset_cpu()

    @@
    identifier argname;
    type argtype;
    @@
    - reset_cpu(argtype argname)
    + reset_cpu(void)
    { ... }

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-02 14:03:02 -05:00
Tom Rini
9935050b44 Pull request for efi-2021-04-rc3-2
Bug fixes:
 * debug build for mkeficapsule
 * limit output length for VenHw, VenMedia
 * ACPI tables must be in EfiACPIReclaimMemory
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmA5FmUACgkQxIHbvCwF
 GsRhkQ/+MqWhkKwTXAiLZoZe6oNVn0WQ9R86BPrEL55shl7eK7qz8Y+dsC37y71Q
 XdAvwo9tEOseta57xwBRQh4GQ1LXcnZLRNw9zrcSRgBGa+W0hDTKyZvyKmEpzYjd
 BdOWS1e53rnxGqkYlX+qGMuiCJCHsDB1VPd/BMtwphBD0DK3ss9paLlMkP7JsfKk
 e2ujxE3rp1WWQ8BripBffy2Fn9dV+xUM8WDWQyJMzoUKrpHbTqD01clc22+4sPXz
 iajPSxLFqNMrFHci4hMg/XBnJR6JENNjpjN98PizRA0DPycsqdBIF0v1wppIy4yl
 SibtyrNJvIGD0tCWD0pV8x//SL/ziJNcXJXp2+DnFZZJQ4KpTdUQrXVEpcg4K/ZR
 5CbNFUYnXoItbPpJi2fKLAdyB0ZBgGw0bIYhLjtoiR+upzNV4R4JNuC99GO9kSpr
 RdEmPzYbmc6OiHs33li7pYrj7/P5hKajL9lPJItns8rX6JsKIeEE2/xdWju2qk1M
 sHA6tRn7ZNpRSBBZsL/1QP8CZjMW2439hG2sz9emwhIdoUSH4eVVG8S0o7KH2eDN
 ji9UB0W4ww1lyy5QksWk/uL4pHjTLhj7uTcpYA3kkvq7sXNGDAMU3m0wmLSAzzSR
 fQ+wONKOpS1LcpTk/Rpxb5QAANyiGBLwOc4XUgfApRiydB0Rpb4=
 =l4pf
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-04-rc3-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for efi-2021-04-rc3-2

Bug fixes:
* debug build for mkeficapsule
* limit output length for VenHw, VenMedia
* ACPI tables must be in EfiACPIReclaimMemory
2021-02-27 08:06:10 -05:00
Tom Rini
08cca188c1 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb
- fastboot updates / fixes
2021-02-26 15:11:08 -05:00
Tom Rini
b839fc9d47 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- new GigaDevice flash ids
- fixes for imx, nxp_spi drivers
2021-02-26 12:41:19 -05:00
Heinrich Schuchardt
a2c3f1bca4 cmd/efidebug: add firmware management protocol GUID
Add missing GUID short text used in the efidebug tables and efidebug dh
sub-commands.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-26 16:17:43 +01:00