Commit Graph

750 Commits

Author SHA1 Message Date
Simon Glass
288b29e44d common: Move command functions out of common.h
Move these functions into the command.h header file which is a better fit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:25:02 -05:00
Simon Glass
1045315df0 common: Move get_ticks() function out of common.h
This function belongs in time.h so move it over and add a comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:13 -05:00
Simon Glass
6c03f9e618 common: Add a new lz4.h header file
Add a header file to house the lz4 compression function. Add a comment
while we are here, since it not even clear from the name what the function
actuall does.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02 18:23:11 -05:00
Heinrich Schuchardt
12f1e7908a dm: test: usb: rework keyboard test
Allow the unit test to pass full 8 byte scan code sequences to the USB
keyboard emulation driver and to parse multi-byte escape sequences.

The following features are not yet tested:

* LED status
* caps-lock
* num-lock
* numerical pad keys

The following features are not yet implemented by the USB keyboard
driver and therefore not tested:

* modifiers for non-alpha-numeric keys, e.g. <SHIFT><TAB> and <ALT><F4>
* some special keys, e.g. <PRINT>
* some modifiers, e.g. <ALT> and <META>
* alternative keyboard layouts

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-25 13:28:53 +01:00
Heiko Stuebner
96383bdfe4 tests: add OP-TEE test suite
OP-TEE can get supplied with a devicetree and will then insert
its firmware node and reserved-memory sections into it.
As this devicetree often is not the one supplied to a later
loaded kernel, a previous commit added functionality to transfer
these nodes onto that new devicetree.

To make sure this functionality stays intact, also add a test
for the transfer functionality.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-14 07:09:34 -06:00
Joseph Chen
11406b8f7e dm: regulator: support regulator more state
support parse regulator standard property:
regulator-off-in-suspend;
regulator-init-microvolt;
regulator-suspend-microvolt:
 regulator_get_suspend_enable
 regulator_set_suspend_enable
 regulator_get_suspend_value
 regulator_set_suspend_value

Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-11-10 20:31:09 +08:00
Simon Glass
c53b318e1b spi: Add support for memory-mapped flash
On x86 platforms the SPI flash can be mapped into memory so that the
contents can be read with normal memory accesses.

Add a new SPI method to find the location of the SPI flash in memory. This
differs from the existing device-tree "memory-map" mechanism in that the
location can be discovered at run-time.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-11-03 07:20:26 +08:00
Tom Rini
bb1bb4bb5d Fix for patman with email addresses containing commas
Bootstage improvements for TPL, SPL
 Various sandbox and dm improvements and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAl24zDoRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreZRiwf+Mf7oG//zjiZcHaPP6KOFb1CjwqLSuiaI
 eCYB6GEZXuSpc8MjAw+baAfIw8MMFuaCfPsUQ5dDo391neK0sW9kkEsdcXnQBpB3
 GdJYcewLN1UuJZovriGobIisGc0GQHh8gmRcVGWSKoEt+gAQauRtVYBIUPuS3JG+
 ihZgYmVgICa+3tqavIbP2oZdXLuLAxR65mfiQHtiJwdCN3OOzyls2v0T0slQX9GV
 ln6EvTk8OMIudBmkB7YiTmJF7AB+3PH/uBaiYyTKO9gtjLhnmCFvG5HxJTRFOKvU
 F4oVWZJDEcqfZvYgWg8i5vgokMP41nzLfBr7j5ifUX1f3xwCHy/Tpw==
 =S4XI
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-29oct19' of git://git.denx.de/u-boot-dm

- Fix for patman with email addresses containing commas
- Bootstage improvements for TPL, SPL
- Various sandbox and dm improvements and fixes
2019-11-01 09:34:35 -04:00
Heinrich Schuchardt
79c84de468 test: provide test for errno_str()
Provide a unit test for errno_str(). Test that known and unknown error
numbers are handled correctly.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-31 07:22:53 -04:00
Tom Rini
15579631bc test/py: Use raw strings more to avoid deprecation warnings
We have two further uses of raw string usage in the test/py codebase
that are used under CI.  The first of which is under the bind test and
is a direct update.  The second of which is to strip VT100 codes from
the match buffer.  While switching this to a raw string is also a direct
update, the comment it notes that problems were encountered on Ubuntu
14.04 (and whatever Python 2 version that was) that required slight
tweaks to the regex.  Replace that now that we're saying Python 3.5 is
the minimum.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Tom Rini
ddaa8bed3d test/py: Update docs, add requirements.txt for pip
To be more closely aligned with Python community best practices, we need
to better document our usage of pip and make use of a requirements.txt
file that shows the versions of the tools that we are using.  This will
aide in ensuring reproducibility of our tests as well.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Tom Rini
8add4fa417 test/py: Rework test.py to be a different kind of wrapper
Now that we have moved to being based on pytest for python3 we need to
make our test.py wrapper more robust in terms of only calling python3
rather than possibly finding and using python2.  To do this, change from
execvp()'ing pytest to invoking the package itself via python.  In the
event that pytest is unavailable we still get a user-friendly error:

pkg_resources.DistributionNotFound: The 'pytest' distribution was not found and is required by the application

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Tom Rini
d2b5240c9a test/py: Update test_fs to decode check_output calls
The check_output function from the subprocess Python module by default
returns data as encoded bytes and leaves decoding to the application.
Given our uses of the call, it makes the most sense to immediately
decode the results.

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Tom Rini
1813ace6fc test/py: test_efi_selftest.py: Updates for python 3 support
- In python 3 you must use raw strings for regex as other forms are
  deprecated and would require further changes to the pattern here.
  In one case this lets us have a simpler match pattern.
- As strings are now Unicode our complex tests (Euro symbol,
  SHIFT+ALT+FN 5) we need to declare that as a bytes string and then
  decode it for use.

Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Tom Rini
8060209a92 test/py: test_ut.py: Ensure we use bytes
In the case of some unit tests we are working with providing a fake
flash device that we have written some text strings in to.  In this case
we want to tell Python to encode things to bytes for us.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Tom Rini
fd31fc172c test/py: Manual python3 fixes
- Modern pytest is more visible in telling us about parameters that we
  had not described, so describe a few more.
- ConfigParser.readfp(...) is now configparser.read_file(...)
- As part of the "strings vs bytes" conversions in Python 3, we use the
  default encoding/decoding of utf-8 but in some places tell Python to
  replace problematic conversions rather than throw a fatal error.
- Fix a typo noticed while doing the above ("tot he" -> "to the").
- As suggested by Stephen, re-alphabetize the import list
- Per Heinrich, replace how we write contents in test_fit.py

Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Tom Rini
fe1193e254 test/py: Automated conversion to Python 3
Use the 2to3 tool to perform numerous automatic conversions from Python
2 syntax to Python 3.  Also fix whitespace problems that Python 3
catches that Python 2 did not.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Marek Vasut
3c941e048c test/py: Fix pytest4 deprecation warnings
Fix the following spit from pytest:

u-boot/test/py/conftest.py:438: RemovedInPytest4Warning: MarkInfo objects are deprecated as they contain merged marks which are hard to deal with correctly.
  Please use node.get_closest_marker(name) or node.iter_markers(name).
  Docs: https://docs.pytest.org/en/latest/mark.html#updating-code
    for board in mark.args:

In both cases, the later suggestion is applicable.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Igor Opaniuk <igor.opaniuk@gmail.com>
[trini: Update for current file with a few more cases, un-pin pytest in CI]
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:47 -04:00
Tom Rini
79883ef7dc test/py: Split mark to multiple lines
We inconsistently note multiple dependencies today in our tests,
sometimes with a single line that declares multiple and sometimes
multiple single lines.  Current pytest seems to fail on the single line
format so change to multiple declarations.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Simon Glass <sjg@chromium.org> [on sandbox]
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-30 17:48:46 -04:00
Jean-Jacques Hiblot
2333dc47b8 test: regmap: check the values read from the regmap
The test did reads after writes but didn't check the value.
It probably was because the sandbox didn't implement the writeX/readX
functions.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Updated to use sandbox_set_enable_memio():
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-27 10:56:41 -06:00
Jean-Jacques Hiblot
9a52be129c test: clk: test clock self assignment
Make sure that the clock self-assignment works by having a clock of
clk-sbox be configured automatically when clk-sbox is probed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-22 16:14:05 +02:00
Jean-Jacques Hiblot
dd2e0ce2a4 test: clk: Update tests to also check the managed API
Add a few more clocks the clk_sandbox clock provider and get them using
the managed API.
Make sure they are released when the device is removed.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-10-22 16:14:05 +02:00
Patrick Delaunay
2a43dbdf96 dm: Tidy up dump output when there are many devices
At present the 'Index' column of 'dm tree' assumes there is
two digits, this patch increase it to 3 digits.

It also aligns output of 'dm uclass', assuming the same 3 digits index.

The boards with CONFIG_PINCTRL_FULL activated have one pinconfig
by pin configuration, so they can have more than 100 devices
pinconfig (for example with stm32mp157c-ev1 board we have
106 pinconfig node).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15 08:40:03 -06:00
Philippe Reynes
ce5172cf65 pytest: vboot: add a test for required key
This commit add a test in the vboot test to check that
when a required key is asked, only FIT signed with this
key is used/accepted by u-boot.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-10-15 08:40:02 -06:00
Yannick Fertré
23f965a4c6 dm: Add a dsi host uclass
Display Serial Interface (DSI) host can usefully be modelled
as their own uclass.
DSI defines a serial bus and a communication protocol
between the host and the device (panel, bridge).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
2019-10-13 23:34:43 +02:00
Lokesh Vutla
81e39fbd92 remoteproc: elf_loader: Introduce rproc_elf_get_boot_addr() api
Introduce rproc_elf_get_boot_addr() that returns the entry point of
the elf file. This api auto detects the 64/32 bit elf file and returns
the boot addr accordingly.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:34 -04:00
Lokesh Vutla
14d963d1b5 remoteproc: elf_loader: Always check the validity of the image before loading
rproc_elf32_load_image() rely on user to send a valid address for elf loading.
Instead do a sanity check on the address passed by user. This will help
all rproc elf users to not call sanity_check explicitly before calling
elf_loading.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
2019-10-11 10:07:34 -04:00
Lokesh Vutla
240b932010 dm: core: Add a function to count the children of a device
Add a function to count the available children of a device.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-11 10:07:33 -04:00
Simon Glass
33c215af4b dm: pci: Add a function to read a PCI BAR
At present PCI address transaction is not supported so drivers must
manually read the correct BAR after reading the device tree info. The
ns16550 has a suitable implementation, so move this code into the core
DM support.

Note that there is no live-tree equivalent at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: correct the unclear comments in test.dts]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:43 +08:00
Simon Glass
3414581380 sandbox: Rename PCI ID for swap_case to be more specific
Rename this ID to SANDBOX_PCI_SWAP_CASE_EMUL_ID since it is more
descriptive and allows us to add new PCI emulators without any conflict or
confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:39 +08:00
Simon Glass
22327003a9 dm: test: Correct a stray backslash in dm_test_destroy()
This should perhaps be a period.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: add the ending period and reword the commit message]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:39 +08:00
Simon Glass
4805a7af8e dm: core: Correct the return value for uclass_find_first_device()
This function returns -ENODEV when there is no device. This is
inconsistent with other functions, such as uclass_find_next_device(),
which returns 0.

Update it and tidy up the incorrect '-1' values in the comments.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:38 +08:00
Simon Glass
ad95047936 dm: test: Don't fail when tests are skipped due to build
At present tests that are marked as only for livetree fail when executed
on sandbox_flattree. They cannot actually be executed, but we should not
resport them as 'not found', since this causes errors. Instead, they
should be silently skipped.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:38 +08:00
Simon Glass
fe9a967925 dm: test: Fix running of multiple test from command line
At present when multiple 'ut dm' commands are executed, all but the first
is run with a flat tree, even if live tree is enabled. This is because the
live tree node pointer is set to NULL and never restored.

This does not affect normal test running, which just runs all the test in
one go, but can be confusing when several individual tests are run during
the same U-Boot run.

Correct this by restoring the pointer.

Fixes: c166c47ba3 (dm: test: Add support for running tests with livetree)
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08 13:57:38 +08:00
AKASHI Takahiro
79907a4f84 test: add tests for u16_str<n>cmp()
New seven test cases for u16_str<n>cmp() are added under Unicode unit test,
which should be executed by "ut unicode" command.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-09-20 20:09:19 +02:00
Rick Chen
abd858e575 dm: cache: Add enable and disable ops for sandbox and test
Add cache enable and disable ops for test coverage.

Signed-off-by: Rick Chen <rick@andestech.com>
Cc: KC Lin <kclin@andestech.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-03 09:31:03 +08:00
Peng Fan
c66f4f5e30 sandbox: clk: add clk enable/disable test code
Since we added clk enable_count and prograte clk child enabling
operation to clk parent, so add a new function sandbox_clk_enable_count
to get enable_count for test usage.

And add test code to get the enable_count after we enable/disable
the device clk.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-08-22 00:10:09 +02:00
Michal Simek
753e5385ca test/py: Add cmd_memory dependency back to test_mmc_wr
Based on discussion with Stephen Warren there was recommendation to list
both memory and random command dependencies just in case that dependency is
not properly handled by Kconfig.

Fixes: a09c1f7e1c ("test/py: Fix MMC/SD block write test dependency")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
2019-08-22 00:09:58 +02:00
Tom Rini
9c6115822e Merge branch '2019-08-11-ti-imports'
- More DaVinci updates and fixes
- PCIe support on am65x
- Watchdog converted to DM
- Assorted other bugfixes
2019-08-12 18:47:53 -04:00
Sekhar Nori
f5b904796f dm: core: add support for getting register address and size
Current dev_read_*() API lacks support to get address and size
of a "reg" property by name or index. Add support for the same.

Livetree support has been added but not tested on real hardware.

The existing unit tests testing reading address from device-tree
have been updated to test address as well as size.

Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12 13:33:39 -04:00
Sekhar Nori
acbb7cd4d3 clk: add support for clk_is_match()
Add support for clk_is_match() which is required to
know if two clock pointers point to the same exact
physical clock.

Also add a unit test for the new API.

Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-08-12 13:33:38 -04:00
Simon Glass
3f0d680745 env: Drop the ACTION typedef
Avoid using a typedef here which is unnecessary. Add an 'env_' prefix to
both the enum and its members to make it clear that these are related to
the environment.

Add an ENV prefix to these two flags so that it is clear what they relate
to. Also move them to env.h since they are part of the public API. Use an
enum rather than a #define to tie them together.

Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
dd2408cac1 env: Drop the ENTRY typedef
U-Boot is not supposed to use typedef for structs anymore. Also this name
is the same as the ENTRY() macro used in assembler files, and 'entry'
itself is widely used in U-Boot (>8k matches).

Drop the typedef and rename the struct to env_entry to reduce confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-11 16:43:41 -04:00
Simon Glass
9fb625ce05 env: Move env_set() to env.h
Move env_set() over to the new header file.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
Simon Glass
0c670fc148 common: Move gzip functions into a new gzip header
As part of the effort to remove things from common.h, create a new header
for the gzip functions. Move the function declarations to it and add
missing documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-11 16:43:41 -04:00
Michal Simek
a09c1f7e1c test/py: Fix MMC/SD block write test dependency
Test is using random command which has own Kconfig symbol CMD_RANDOM which
already depends on CMD_MEMORY. That's why replace cmd_memory by cmd_random.

Fixes: 09da18deab ("test/py: add MMC/SD block write test")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-08-09 13:45:25 +08:00
Sam Protsenko
2e8fef747b test/py: avb: Move AVB test to android dir
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-08-07 23:15:13 -04:00
Julius Werner
bddd985734 fit: Do not automatically decompress ramdisk images
The Linux ramdisk should always be decompressed by the kernel itself,
not by U-Boot. Therefore, the 'compression' node in the FIT image should
always be set to "none" for ramdisk images, since the only point of
using that node is if you want U-Boot to do the decompression itself.

Yet some systems populate the node to the compression algorithm used by
the kernel instead. This used to be ignored, but now that we support
decompression of all image types it becomes a problem. Since ramdisks
should never be decompressed by U-Boot anyway, this patch adds a special
exception for them to avoid these issues. Still, setting the
'compression' node like that is wrong in the first place, so we still
want to print out a warning so that third-party distributions doing this
can notice and fix it.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-07 15:31:05 -04:00
Tom Rini
898c40c0d6 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clk
- Port more CCF code to work with i.MX8 devices.
2019-08-02 13:29:46 -04:00
Jean-Jacques Hiblot
09da18deab test/py: add MMC/SD block write test
Add a standalone MMC block write test. This allows direct testing of MMC
access rather than relying on doing so as a side-effect of e.g. DFU or
UMS testing, which may not be enabled on all platforms.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
2019-07-31 15:31:36 +08:00