Commit Graph

69560 Commits

Author SHA1 Message Date
AKASHI Takahiro
ed9349c697 efi_loader: capsule: add memory range capsule definitions
Memory range capsule gives us a way to notify that some memory regions
should be left untouched across the next reset.
See UEFI specification, section 8.5.3.

Since how we should handle this kind of capsule is totally up to
the system, no implementation will be added in this commit.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:49 +01:00
AKASHI Takahiro
c74cd8bd08 efi_loader: capsule: add capsule_on_disk support
Capsule data can be loaded into the system either via UpdateCapsule
runtime service or files on a file system (of boot device).
The latter case is called "capsules on disk", and actual updates will
take place at the next boot time.

In this commit, we will support capsule on disk mechanism.

Please note that U-Boot itself has no notion of "boot device" and
all the capsule files to be executed will be detected only if they
are located in a specific directory, \EFI\UpdateCapsule, on a device
that is identified as a boot device by "BootXXXX" variables.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:49 +01:00
AKASHI Takahiro
2bc27ca8a0 efi_loader: define UpdateCapsule api
In this commit, skeleton functions for capsule-related API's are
added under CONFIG_EFI_UPDATE_CAPSULE configuration.
Detailed implementation for a specific capsule type will be added
in the succeeding patches.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:49 +01:00
AKASHI Takahiro
96ec4b1a18 common: update: fix an "unused" warning against update_flash()
Since update_flash() is used only in update_tftp(), it should be
guarded with appropriate config options.

After the commit 3149e524fc, common/update.c will be built under
either CONFIG_UDATE_TFTP, CONFIG_DFU_TFTP or CONFIG_UPDATE_FIT.
Since CONFIG_UPDATE_FIT, hence fit_update(), doesn't rely on
update_flash(), the compiler may cause an "unused" warning if
CONFIG_UPDATE_FIT=y and CONFIG_UPDATE_TFTP=n and CONFIG_DFU_TFTP=n.

This is, for example, the case for sandbox defconfig where
EFI_CAPSULE_FIRMWARE_FIT is enabled for test purpose.

Fixes: 3149e524fc ("common: update: add a generic interface for FIT
       image")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2020-12-03 21:22:49 +01:00
Ilias Apalodimas
94e7820024 cmd: efidebug: Add support for TCG2 final events table
A previous commit is adding EFI_TCG2_PROTOCOL, which in it's eventlog
support registers an EFI configuration table.
Let's add the necessary GUID so 'efidebug table' command can display
table names properly.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-12-03 21:22:40 +01:00
Ilias Apalodimas
c8d0fd5825 efi_loader: Introduce eventlog support for TCG2_PROTOCOL
In the previous patches we only introduced a minimal subset of the
EFI_TCG2_PROTOCOL protocol implementing GetCapability().
So let's continue adding features to it, introducing the
GetEventLog() and HashLogExtendEvent() functions.

In order to do that we first need to construct the eventlog in memory,
specifically in EFI_BOOT_SERVICES_DATA memory and a configuration table
from EFI_ACPI_MEMORY_NVS.
U-Boot won't currently add any events to the log or measure any
components, but will expose the necessary EFI APIs for applications
to do so.

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-12-03 21:22:40 +01:00
Ilias Apalodimas
8e0b0871b8 tpm: Add tpm2 headers for TCG2 eventlog support
A following patch introduces support for the EFI_TCG2_PROTOCOL
eventlog management.
Introduce the necessary tpm related headers

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-12-03 21:22:40 +01:00
Ilias Apalodimas
e926136bb2 tpm: use more than sha256 on pcr_extend
The current tpm2_pcr_extend is hardcoded using SHA256.
Let's make the actual command to the TPM2 configurable so we can support
a wider range of algorithms and keep the current command line as-is i.e
limited to SHA256 only

Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-03 21:22:40 +01:00
Heinrich Schuchardt
fc364424ac efi_loader: replace printf by log in efi_uclass.c
Use logging functions instead of printf() and debug().

Change logging messages for uclass creation and destruction to log_debug().

Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-03 21:22:30 +01:00
Tom Rini
a2c8324711 Merge branch '2020-12-01-next-imports' into next
- More IPQ40xx improvements
- Add string support to setexpr (and tests)
- ProxyDHCP support
- Assorted cleanups
2020-12-02 11:35:02 -05:00
Holger Brunck
7292a18256 km/arm: coding style clean up
Address most of the checkpatch issues we found in km_arm and common km
code.

CC: Stefan Roese <sr@denx.de>
CC: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2020-12-01 14:12:28 -05:00
Philippe Reynes
7d5b1bf6b8 spl: spl_fit.c: enable check of signature for config node in spl/tpl
This commit add the support of signature check for config node
in spl/tpl when the function spl_load_simple_fit is used.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-01 14:12:28 -05:00
Robert Marko
a282ada198 IPQ40xx: clk: add USB clock handling
USB clocks were completely forgotten as driver would always return 0 even if clock ID was unknown.

This behaviour changed with "IPQ40xx: clk: dont always return 0" and this will now causes the USB-s to fail probing as clock enable will return -EINVAL.

So to fix that lets add all of the USB clocks to the driver.

Fixes: 430e1dcf ("IPQ40xx: Add USB nodes")

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-12-01 14:12:28 -05:00
Robert Marko
20476b51aa IPQ40xx: clk: dont always return 0
Currently the driver will go through the clock ID-s and set/enable them as needed.
But if the ID is unknown it will fall through the switch case to the default case which will always return 0.

This is not correct and default cases should return a error code since clock ID is unknown.
So lets return -EINVAL instead.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-12-01 14:12:28 -05:00
Robert Marko
164cc98a7b IPQ40xx: clk: drop breaks in switch case
There is no point in having break statements in the switch case as there is already a return before break.

So lets drop them from the driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-12-01 14:12:28 -05:00
Robert Marko
90534536a3 IPQ40xx: clk: use dev_read_addr()
Lets convert the driver to use dev_read_addr() instead of the devfdt_get_addr().

While we are here, lets also alphabetise the includes.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-12-01 14:12:28 -05:00
Patrick Delaunay
48aee0afb6 cmd: Kconfig: migrate CONFIG_SYS_PROMPT_HUSH_PS2
Move CONFIG_SYS_PROMPT_HUSH_PS2 in Kconfig, depending
on CONFIG_HUSH_PARSER, and remove the default value defined
in cli_hush.c under __U_BOOT__.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-01 14:12:28 -05:00
Patrick Delaunay
310f285e78 hush: Remove default CONFIG_SYS_PROMPT_HUSH_PS2 setting from board files
There is no reason to define default option for this macro which is
already done in common/cli_hush.c.

  87 #ifndef CONFIG_SYS_PROMPT_HUSH_PS2
  88 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
  89 #endif

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-12-01 14:12:28 -05:00
Heinrich Schuchardt
e1864db60d net: sntp: remove CONFIG_TIMESTAMP constraint
CONFIG_TIMESTAMP is not related to the RTC drivers. It does not make any
sense to let the updating of the RTC by the sntp command depend on it.

Drop the CONFIG_TIMESTAMP checks.

Furthermore function dm_rtc_set() is enabled by CONFIG_DM_RTC. There is no
reason to require CONFIG_CMD_DATE when using a driver model RTC. The UEFI
sub-system can consume the RTC functions even if there is not date command.

Only check CONFIG_CMD_DATE when using a non-driver model RTC.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-12-01 14:12:28 -05:00
Simon Glass
2c02152a8e setexpr: Add support for strings
Add support for dealing with string operands, including reading a string
from memory into an environment variable and concatenating two strings.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Marek Behún <marek.behun@nic.cz>
2020-12-01 10:33:38 -05:00
Simon Glass
f66bee41ab setexpr: Convert to use a struct for values
At present a ulong is used to hold operand values. This means that
strings cannot be used. While most operations are not useful for strings,
concatenation is. As a starting point to supporting strings, convert the
code to use a struct instead of a ulong for operands.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
8f4aa7ddb9 setexpr: Correct buffer overflow bug and enable tests
At present when more than one substitution is made this function
overwrites its buffers. Fix this bug and update the tests now that they
can pass.

Also update the debug code to show all substrings, since at present it
omits the final one.

Fixes: 855f18ea0e ("setexpr: add regex substring matching and substitution")
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
9528229f22 setexpr: Correct dropping of final unmatched string
At present the 'nlen' variable increases with each loop. If the previous
loop had back references, then subsequent loops without back references
use the wrong value of nlen. The value is larger, meaning that the string
terminator from nbuf is copied along to the main buffer, thus terminating
the string prematurely.

This leads to the final result being truncated, e.g. missing the last
(unmatched) part of the string. So "match match tail" become
"replaced replaced" instead of "replaced replaced tail".

Fix this by resetting nlen to the correct value each time around the lop.

Fixes: 855f18ea0e ("setexpr: add regex substring matching and substitution")
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
d422c77ae8 setexpr: Add some tests for buffer overflow and backref
Add tests to check for buffer overflow using simple replacement as well
as back references. At present these don't fully pass.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
56331b2680 setexpr: Split the core logic into its own function
At present this function always allocates a large amount of stack, and
selects its own size for buffers. This makes it hard to test the code
for buffer overflow.

Separate out the inner logic of the substitution so that tests can call
this directly. This will allow checking that the algorithm does not
overflow the buffer.

Fix up one of the error lines at the same time, since it should be
printing nbuf_size, not data_size.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
e713124e35 test: Add some setexpr regex tests
Add tests for the setexpr regex commands.

Note that these tests currently crash on sandbox due to an existing bug in
the setexpr implementation, so two of the tests are commented out.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
25a43ac84a setexpr: Add explicit support for 32- and 64-bit ints
At present this function assumes that a size of 4 refers to a ulong. This
is true on 32-bit machines but not commonly on 64-bit machines.

This means that the 'l' specify does not work correctly with setexpr.

Add an explicit case for 32-bit values so that 64-bit machines can still
use the 'l' specifier. On 32-bit machines, 64-bit is still not supported.

This corrects the operation of the default size (which is 4 for setexpr),
so update the tests accordingly.

The original code for reading from memory was included in 47ab5ad145
("cmd_setexpr: allow memory addresses in expressions") but I am not adding
a Fixes: tag since that code was not written with 64-bit machines in mind.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
7526deec7e command: Add constants for cmd_get_data_size string / error
At present these values are open-coded in a few places. Add constants so
the meaning is clear.

Also add a comment to cmd_get_data_size()

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Simon Glass
90a9901764 test: Add some tests for setexpr
This command currently has no tests. Add some for basic assignment and the
integer operations.

Note that the default size for setexpr is ulong, which varies depending on
the build machine. So for sandbox on a 64-bit host, this means that the
default size is 64 bits.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Pali Rohár
4532bf411e Makefile: Correctly propagate failure when removing target
On more places is used pattern 'command > $@ || rm -f $@'. But it does not
propagate failure from 'command' as 'rm -f' returns success.

Fix it by calling 'false' to correctly propagate failure after 'rm -f'.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-12-01 10:33:38 -05:00
Patrick Delaunay
8558217153 gpio: Convert to use APIs which support live DT
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the
driver can support live DT.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
2020-12-01 10:33:37 -05:00
Lyle Franklin
c8e251f82a Adds basic support for ProxyDHCP
- ProxyDHCP allows a second DHCP server to exist alongside your main
  DHCP server and supply additional BOOTP related options
- When u-boot sends out a DHCP request, the real DHCP server will
  respond with a normal response containing the new client IP address
  while simultaneously the ProxyDHCP server will respond with a blank
  client IP address and a `bootfile` option
- This patch adds CONFIG_SERVERIP_FROM_PROXYDHCP (default false) to
  enable this behavior and CONFIG_SERVERIP_FROM_PROXYDHCP_DELAY_MS
  (default 100) which tells u-boot to wait additional time after
  receiving the main DHCP response to give the ProxyDHCP response time
  to arrive
- The PXE spec for ProxyDHCP is more complicated than the solution
  added here as diagramed on page 16:
  http://www.pix.net/software/pxeboot/archive/pxespec.pdf:

```
DHCP Discover will be retried four times. The four timeouts are 4, 8, 16
and 32 seconds respectively. If a DHCPOFFER is received without an Option
timeouts in an attempt to receive a PXE response.
```

- Adding a simple delay worked for my purposes but let me know if a
  more robust solution is required

Signed-off-by: Lyle Franklin <lylejfranklin@gmail.com>
2020-12-01 10:33:37 -05:00
Anton Leontiev
db3667413d cmd: pxe: Use internal FDT if retrieving from FDTDIR fails
As FDTDIR label doesn't specify exact file to be loaded, it should
not fail if no file exists in the directory. In this case try to boot
with internal FDT if it exists.

Signed-off-by: Anton Leontiev <aleontiev@elvees.com>
2020-12-01 10:33:37 -05:00
Tom Rini
0719bf4293 Prepare v2021.01-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 13:09:42 -05:00
Tom Rini
53def460d2 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-11-30 12:50:32 -05:00
Tom Rini
a7ab4b71d5 Merge tag 'mmc-2020-11-29' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc
- mmc minor update for better debug and error check
- fsl_esdhc sysctl set and make sure delay check for HS400
2020-11-29 11:12:59 -05:00
Tom Rini
fc4c2f7f85 Pull request for UEFI sub-system for efi-2021-01-rc3 (3)
The following errors are corrected:
 
 * Linux crash when accessing UEFI variables at runtime.
 * UEFI variable using standalone MM on 32 bit systems
   not working due to missing packing of communication
   structure
 * NULL dereference when FAT16 root directory is full
 * FAT files with a short file name starting with 0xE5 (0x05 in directory
   entry) where treated as deleted.
 
 The UEFI SetTime() service is enabled on ARM QEMU.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAl/DPScACgkQxIHbvCwF
 GsQDhA/8CZAwTdKeXGkjaaQqDnU2rYS0D6HlQPeRFAjOC7bG2wD1WBEMz27j4on0
 3IgX/E9M3HVk2AtFHT/yOs3fhEXXZLONjciL5bppxZzfyYvhe/b3/GPy1BxjCSJ9
 8N0KohKU8xyGFCQjyyeBv3qnQV8m1WK7rIctFZ/0VZITvNCAdjRm0lcMBANQdG+B
 xlEmOUcPopNs01xmWBKwtZ5FXBb8dKo6+JZkRjBMN3PoBGzM53xiAn6Lv+coKr+c
 Z3DGgCpkOevSi6hYZZ2M5Dfe/Ar7fn4dInuxLjHaT05r7SRkmeqrFOSkvX7rKwa3
 IGpR+D6edb3qZ1XSiiqNLni/vxSVQFxWJwGFa50zk9pnCnD+lzUECLITOh5FD/Qb
 W9HK0lhgWzYX9+l+mrZ6XldhQhvSABa0B3Zxb9Y8+c2bfut04XuaKCtlJM3y83hu
 1AaNE5ClIU87sobn/jpdTiJSLz8F2rOSf7jVgdUmXP1Nc+q8vr+YzjDcM8BmGWrL
 k2Ku8npMkpn2JG1W7lwzlA5en6/+L5hAaujBo/jj1KlwUlNnfyVNVu/AZlK38Ug6
 7QIi7FJ7T4onRAkNqfzqfYlB2yvth1p/v3LomyGlkJgFCB+WW5aHVCK38/BlQ5jR
 Uf2uv7xX510vfct/wBYUAz3fp7S2l7K9Lf/dSNpgegiSSUe+5jc=
 =CgpH
 -----END PGP SIGNATURE-----

Merge tag 'efi-2021-01-rc3-3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi

Pull request for UEFI sub-system for efi-2021-01-rc3 (3)

The following errors are corrected:

* Linux crash when accessing UEFI variables at runtime.
* UEFI variable using standalone MM on 32 bit systems
  not working due to missing packing of communication
  structure
* NULL dereference when FAT16 root directory is full
* FAT files with a short file name starting with 0xE5 (0x05 in directory
  entry) where treated as deleted.

The UEFI SetTime() service is enabled on ARM QEMU.
2020-11-29 11:12:49 -05:00
Ilias Apalodimas
6974a4a373 charset: make u16_strnlen accessible at runtime
commit 1fabfeef506c ("efi_loader: parameter check in GetNextVariableName()")
introduces a check using u16_strnlen(). This code is used on EFI
runtime variables as well, so unless we mark it as runtime, the kernel
will crash trying to access it.

Fixes: 1fabfeef506c ("efi_loader: parameter check in GetNextVariableName()")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-29 05:18:37 +01:00
Etienne Carriere
03699bc756 lib/efi_loader: fix ABI in efi_mm_communicate_header
Pack struct efi_mm_communicate_header as done in EDK2 as seen in
release 201808 [1]. If not packed sizeof() for the structure adds
4 additional bytes on 32bit targets which breaks the ABI.

Link: [1] https://github.com/tianocore/edk2/blob/edk2-stable201808/MdePkg/Include/Protocol/MmCommunication.h#L21
Fixes: 23a397d2e2 ("efi_loader: Add headers for EDK2 StandAloneMM communication")
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-11-29 05:18:37 +01:00
Heinrich Schuchardt
31cadc3635 efi_loader: enable EFI_SET_TIME on sandbox and QEMU ARM
Enable EFI_SET_TIME on the sandbox and QEMU ARM to ensure that we compile
and test the relevant code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-29 05:18:37 +01:00
Heinrich Schuchardt
1ec29aa306 fs: fat: use ATTR_ARCH instead of anonymous 0x20
Using constants instead of anonymous numbers increases code readability.

Fixes: 704df6aa0a ("fs: fat: refactor write interface for a file offset")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-29 05:18:16 +01:00
Heinrich Schuchardt
a2c5a92d48 fs: fat: directory entries starting with 0x05
0x05 is used as replacement letter for 0xe5 at the first position of short
file names. We must not skip over directory entries starting with 0x05.

Cf. Microsoft FAT Specification, August 30 2005

Fixes: 39606d462c ("fs: fat: handle deleted directory entries correctly")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-11-29 05:18:16 +01:00
Heinrich Schuchardt
661d223868 fs: fat: avoid NULL dereference when root dir is full
When trying to create a file in the full root directory of a FAT32
filesystem a NULL dereference can be observed.

When the root directory of a FAT16 filesystem is full fill_dir_slot() must
return -1 to signal that a new directory entry could not be allocated.

Fixes: cd2d727fff ("fs: fat: allocate a new cluster for root directory of fat32")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-29 05:18:16 +01:00
Tom Rini
f6cf78dc6a Merge https://gitlab.denx.de/u-boot/custodians/u-boot-i2c 2020-11-28 10:55:46 -05:00
Pragnesh Patel
f517e5fe98 riscv: sifive/fu540: kconfig: Enable support for Opencores I2C controller
Enable support for SiFive FU540 Opencores I2C master controller.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-28 08:30:41 +01:00
Pragnesh Patel
b2d4cbe6d4 i2c: ocores: add i2c driver for OpenCores I2C controller
Add support for the OpenCores I2C controller IP core
(See http://www.opencores.org/projects.cgi/web/i2c/overview).

This driver implementation is inspired from the Linux OpenCores
I2C driver available.

Thanks to Peter Korsgaard <peter@korsgaard.com> for writing Linux
OpenCores I2C driver.

Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Rick Chen <rick@andestech.com>
2020-11-28 08:30:41 +01:00
Simon Glass
942012246a i2c: designware_i2c: Don't warn if no reset controller
At present if CONFIG_RESET is not enabled, this code shows a warning:

  designware_i2c_ofdata_to_platdata() i2c_designware_pci i2c2@16,0:
	Can't get reset: -524

Avoid this by checking if reset is supported, first.

Fixes: 622597dee4 ("i2c: designware: add reset ctrl to driver")
Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-28 08:30:41 +01:00
Baruch Siach
5a13c0d134 i2c: mvtwsi: disable i2c slave also on Armada 8k
The hidden I2C slave is also present on the Armada 8k AP806. Testing
shows that this I2C slave causes the same issues as Armada 38x.
Disabling that I2C slave fixes all these issues.

I2C blocks on the Armada 8k CP110 are not affected.

Extend the I2C slave disable to Armada 8k as well.

Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-11-28 08:17:16 +01:00
Jaehoon Chung
b3dc016caa mmc: check a return value about regulator's always-on
Regulator can be set to "always-on".
It's not error about enable/disable. It needs to check about
its condition.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-11-28 10:44:39 +08:00
Jaehoon Chung
58896458b7 mmc: display an error number to debug
It's useful to know an error number when it's debugging.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-11-28 10:43:42 +08:00