Commit Graph

12 Commits

Author SHA1 Message Date
Kumar Gala
39a7e7fd53 ppc/p4080: CoreNet platfrom style secondary core release
The CoreNet platform style of bringing secondary cores out of reset is
a bit different that the PQ3 style.  Mostly the registers that we use
to setup boot translation, enable time bases, and boot release the cores
have moved around.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-24 12:05:28 -05:00
Kumar Gala
c725908681 ppc/85xx: Fix bug in setup_mp code
Its possible that we try and copy the boot page code out of flash into a
DDR location that doesn't have a TLB cover it.  For example, if we have
3G of DDR we typically only map the first 2G.  In the cases of 4G+ this
wasn't an issue since the reset page TLB mapping covered the last page
of memory which we wanted to copy to.

We now change the physical address of the reset page TLB to map to the
true physical location of the boot page code, copy and than set the
TLB back to its 1:1 mapping of the reset page.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-09-08 09:10:06 -05:00
Poonam Aggrwal
0e870980a6 8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
The number of CPUs are getting detected dynamically by checking the
processor SVR value.  Also removed CONFIG_NUM_CPUS references from all
the platforms with 85xx/86xx processors.

This can help to use the same u-boot image across the platforms.

Also revamped and corrected few Freescale Copyright messages.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-28 17:12:38 -05:00
Kumar Gala
c840d26c75 85xx: Introduce determine_mp_bootpg() helper.
Match determine_mp_bootpg() that was added for 86xx.  We need this to
address a bug introduced in v2009.03 with 86xx MP booting.  We have to
make sure to reserve the region of memory used for the MP bootpg() so
other u-boot code doesn't use it.

Also added a comment about how cpu_reset() is dealing w/an errata on
early 85xx MP HW.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-01 15:29:49 -05:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Kumar Gala
902ca09246 85xx: Rename CONFIG_NR_CPUS to CONFIG_NUM_CPUS
Use CONFIG_NUM_CPUS to match existing define used by 86xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Jon Loeliger <jdl@freescale.com>
2008-08-12 00:09:29 +02:00
Kumar Gala
348753d416 Fix some more printf() format problems.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-07-14 23:01:01 +02:00
Kumar Gala
cf6cc01427 85xx: Additional fixes and cleanup of MP code
* adjust __spin_table alignment to match ePAPR v0.94 spec
* loop over all cpus when determing who is up.  This fixes an issue if
  the "boot cpu" isn't core0.  The "boot cpu" will already be in the
  cpu_up_mask so there is no harm
* Added some protection in the code to ensure proper behavior.  These
  changes are explicitly needed but don't hurt:
  - Added eieio to ensure the "hot word" of the table is written after
    all other table updates have occurred.
  - Added isync to ensure we don't prefetch loading of table entries
    until we a released

These issues we raised by Dave Liu.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-29 09:42:19 -05:00
Kumar Gala
97b3ecb575 85xx: Fix detection of MP cpu spin up
We were looking at the wrong memory offset to determine of a secondary
cpu had been spun up or not.  Also added a warning message if the
all the secondary cpus we expect don't spin up.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-04-11 17:32:56 -05:00
Kumar Gala
dd6c910aad 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page
Provide a board_lmb_reserve helper function to ensure we reserve
the page of memory we are using for the boot page translation code.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:04 -05:00
Kumar Gala
79679d8002 85xx: Update multicore boot mechanism to ePAPR v0.81 spec
The following changes are needed to be inline with ePAPR v0.81:

* r4, r5 and now always set to 0 on boot release
* r7 is used to pass the size of the initial map area (IMA)
* EPAPR_MAGIC value changed for book-e processors
* changes in the spin table layout
* spin table supports a 64-bit physical release address

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:04 -05:00
Kumar Gala
ec2b74ffd3 85xx: Added support for multicore boot mechanism
Added the cpu command that provides a generic mechanism to get status,
reset, and release secondary cores in multicore processors.

Added support for using the ePAPR defined spin-table mechanism on 85xx.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-03-26 11:43:03 -05:00