Commit Graph

25 Commits

Author SHA1 Message Date
Joe Hershberger
147162dac6 ubi: ubifs: Turn off verbose prints
The prints are out of control.  SILENCE!

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-04-11 15:52:54 -04:00
Joe Hershberger
7182906750 ubi: Expose a few simple functions from the cmd_ubi
Part, Read, and Write functionality that will be used by env_ubi.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2013-04-11 15:52:54 -04:00
Simon Glass
4c12eeb8b5 Convert cmd_usage() calls in common to use a return value
Change all files in common/ to use CMD_RET_USAGE instead of calling
cmd_usage() directly. I'm not completely sure about this patch since
the code since impact is small (100 byte or so on ARM) and it might
need splitting into smaller patches. But for now here it is.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-03-06 21:09:46 +01:00
Marek Vasut
2984fd1673 GCC4.6: Squash warning in cmd_ubi.c:
cmd_ubi.c: In function ‘ubi_volume_read’:
cmd_ubi.c:319:9: warning: variable ‘count_save’ set but not used
[-Wunused-but-set-variable]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-10-01 23:34:21 +02:00
Stefan Roese
7f5d8a4d8e UBI: Fix error code handling in ubi commands
Some ubi commands returned negative error codes, resulting in
the following error message on the prompt:

"exit not allowed from main input shell."

Negative error codes are not allowed.

This patch now changes the UBI code to return positive error codes.
Additionally "better" error codes are used, for example "ENOMEM" when
no memory is available for the UBI volume creation any more.

Also the output of some commands is enhanced:

Before:

=> ubi read 100000 testvol 100000
Volume testvol found at volume id 0
read 1048576 bytes from volume 0 to 100000(buf address)
=> ubi write 100000 testvol 1000
Volume testvol found at volume id 0

After:

=> ubi read 100000 testvol 100000
Read 1048576 bytes from volume testvol to 00100000
=> ubi write 100000 testvol 1000
4096 bytes written to volume testvol

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2011-03-21 10:02:16 +01:00
Stefan Roese
2f15cfd187 UBI/UBIFS: Automatically unmount UBIFS volume upon UBI partition change
Automatically unmount UBIFS partition when user changes the UBI device.
Otherwise the following UBIFS commands will crash.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-12-03 18:24:04 +01:00
Frans Meulenbroeks
388a29d024 various cmd_* files: fixed layout a little bit
Most of the files have U_BOOT_CMD on a separate line,
but a few didn't and had the first line on the same line
as U_BOOT_CMD.

This changes these files by adding a line break and a tab

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
2010-08-09 01:07:37 +02:00
Wolfgang Denk
47e26b1bf9 cmd_usage(): simplify return code handling
Lots of code use this construct:

	cmd_usage(cmdtp);
	return 1;

Change cmd_usage() let it return 1 - then we can replace all these
ocurrances by

	return cmd_usage(cmdtp);

This fixes a few places with incorrect return code handling, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-07-24 20:43:57 +02:00
Wolfgang Denk
54841ab50c Make sure that argv[] argument pointers are not modified.
The hush shell dynamically allocates (and re-allocates) memory for the
argument strings in the "char *argv[]" argument vector passed to
commands.  Any code that modifies these pointers will cause serious
corruption of the malloc data structures and crash U-Boot, so make
sure the compiler can check that no such modifications are being done
by changing the code into "char * const argv[]".

This modification is the result of debugging a strange crash caused
after adding a new command, which used the following argument
processing code which has been working perfectly fine in all Unix
systems since version 6 - but not so in U-Boot:

int main (int argc, char **argv)
{
	while (--argc > 0 && **++argv == '-') {
/* ====> */	while (*++*argv) {
			switch (**argv) {
			case 'd':
				debug++;
				break;
			...
			default:
				usage ();
			}
		}
	}
	...
}

The line marked "====>" will corrupt the malloc data structures and
usually cause U-Boot to crash when the next command gets executed by
the shell.  With the modification, the compiler will prevent this with
an
	error: increment of read-only location '*argv'

N.B.: The code above can be trivially rewritten like this:

	while (--argc > 0 && **++argv == '-') {
		char *arg = *argv;
		while (*++arg) {
			switch (*arg) {
			...

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2010-07-04 23:55:42 +02:00
Peter Tyser
3b653fdb32 cmd_ubi: Fix uninitialized variable warning
gcc 3.4.6 previously reported the following error on many MIPS boards
which utilize UBI:
  cmd_ubi.c:193: warning: 'vol' might be used uninitialized in this function

The current code is structured such that 'vol' will never be used when
it is NULL anyway, but gcc isn't smart enough to figure this out.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-04-09 16:30:29 +02:00
Andrzej Wolski
f6ca3b7094 ubi: help message correction
Fix incorrect information about size units and correct typo.

Signed-off-by: Andrzej Wolski <awolski@poczta.fm>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-20 23:54:57 +02:00
Simon Kagstrom
25c8f40059 Handle VID header offset in ubi part command
The VID header offset is sometimes needed to initialize the UBI
partition. This patch adds it (optionally) to the command line
for the ubi part command.

(Lines have been properly wrapped since last version)

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-09 09:57:54 +02:00
Wolfgang Denk
a89c33db96 General help message cleanup
Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-06-12 20:47:16 +02:00
Andreas Huber
0850301747 UBI: fix return code in ubi_volume_read
Return -ENODEV instead of 0 when trying to read from a non existing volume.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-05-20 13:01:58 +02:00
Stefan Roese
2d579e5060 ubi: Remove flash selection parameter (nor|nand|onenand) from "ubi part"
This patch removes the now unnecessary flash type parameter from the
"ubi part" command. Currently the user has to define the type of flash
he will be using UBI on. Example:

=> ubi part nor partition1

With this patch this type parameter is not needed anymore. The user can
now select the partition directly without the flash type paramter.
Example:

=> ubi part partition1

This breaks backward compatibility right now because of the change in the
command syntax. But UBI support is still quite fresh and the advantage of
this new command is syntax big enough for this change. Additionally the
code is much cleaner now.

Signed-off-by: Stefan Roese <sr@denx.de>
CC: Kyungmin Park <kyungmin.park@samsung.com>
2009-04-28 01:15:35 +02:00
Andreas Huber
c203ef5db0 UBI/cfi-mtd: Fix mtd name for multiple chips
On platforms with multiple NOR chips, currently only the first one
can be selected using the "ubi part" command. This patch fixes this
problem by using different names for the NOR "mtd devices".

It also changes the name of the NOR MTD device from "cfi-mtd" to
"norX" (X indexing the device numer) to better match the mtdparts
defaults.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
2009-04-04 23:25:40 +02:00
Peter Tyser
2fb2604d5c Command usage cleanup
Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28 08:49:52 +01:00
Peter Tyser
62c3ae7c6e Standardize command usage messages with cmd_usage()
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-01-28 08:43:45 +01:00
Wolfgang Denk
455ae7e87f Coding style cleanup, update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-12-16 01:02:17 +01:00
Stefan Roese
3b089e4f88 UBI: Set ubi_dev.type back to DEV_TYPE_NONE upon failing initialization
With this patch we set the type back to NONE upon failing UBI partition
initialization. Otherwise further calls to the UBI subsystem would try
to really access the non-existing UBI partition.

Thanks to Michael Lawnick for pointing this out.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-12-10 12:55:29 +01:00
Stefan Roese
2d2e05727f UBI: Fix size parsing in "ubi create"
Signed-off-by: Stefan Roese <sr@denx.de>
2008-12-09 10:07:41 +01:00
Stefan Roese
2ee951ba2a UBI: Enable re-initializing of the "ubi part" command
With this patch now, the user can call "ubi part" multiple times to
re-connect the UBI device to another MTD partition.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-12-09 10:07:36 +01:00
Piotr Ziecik
25ea652e90 UBI: Add proof-of-concept CFI flash support
With this patch UBI can be used on CFI flash chips.

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 11:33:33 +01:00
Stefan Roese
a5c4067017 UBI: Change parsing of size in commands to default to hex
Currently the size parameters of the UBI commands (e.g. "ubi write") are
decoded as decimal instead of hex as default. This patch now interprets
all these values consistantly as hex, as all other standard U-Boot commands
do.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-24 08:31:16 +01:00
Kyungmin Park
694a0b3f1c UBI: Add UBI command support
This patch adds these UBI commands:

ubi part [nand|onenand] [part] - Show or set current partition
ubi info [l[ayout]] -Display volume and UBI layout information
ubi create[vol] volume [size] [type] - Create volume name with size
ubi write[vol] address volume size - Write volume from address with size
ubi read[vol] address volume [size] - Read volume to address with size
ubi remove[vol] volume - Remove volume

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2008-11-19 20:34:39 +01:00