Commit Graph

733 Commits

Author SHA1 Message Date
Masahiro Yamada
d928664f41 powerpc: 74xx_7xx: remove 74xx_7xx cpu support
All the 74xx_7xx boards are still non-generic boards:
P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2

Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: York Sun <yorksun@freescale.com>
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Nye Liu <nyet@zumanetworks.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
2015-01-16 10:24:39 -05:00
Masahiro Yamada
d622ac3927 powerpc: mpc824x: remove MPC824X cpu support
All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Josef Wagner <Wagner@Microsys.de>
Cc: Torsten Demke <torsten.demke@fci.com>
Cc: Jim Thompson <jim@musenki.com>
Cc: Greg Allen <gallen@arlut.utexas.edu>
2015-01-05 12:08:55 -05:00
Masahiro Yamada
94ab8f411c MAKEALL: run genboardscfg.py all the time
This commit makes sure boards.cfg is up to date before starting
the build tests.  tools/genboardscfg.py exits immediately printing
"boards.cfg is up to date. Nothing to do." when boards.cfg is
already new.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-28 17:18:48 -04:00
Roger Meier
fd18a89e7f Makefile: remove generated boards.cfg within make distclean
Signed-off-by: Roger Meier <roger@bufferoverflow.ch>
Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
2014-08-22 10:41:35 -04:00
Masahiro Yamada
bb6da87d7e MAKEALL: adjust for Kconfig
- Use "make <board>_defconfig" instead of "make <board>_config".

 - Invoke tools/genboardscfg.py to generate boards.cfg when it is
   missing.

 - Show "Building ${BOARD_NAME} board..." message.
   (Prior to Kconfig, instead, mkconfig script displayed
   "Configuring for ${BOARD_NAME} board..." but it was removed.)
   Without this message, we cannot know which board is currently
   being built.

 - Do not show "# configuration written to .config".
   This message is useless and just annoying for MAKEALL.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-30 14:42:02 -04:00
Masahiro Yamada
e18fd9405c MAKEALL: make sure to invoke GNU Make
Since the command name 'make' may not be GNU Make on some platforms
such as FreeBSD, MAKEALL should call scripts/show-gnu-make to get
the command name for GNU MAKE (and error out if it is not found).

The GNU Make should be searched after parsing options because we want
to allow "MAKEALL -h" even if GNU Make is missing on the system.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-07-29 11:48:38 -04:00
Daniel Schwierzeck
ed638b6af2 MAKEALL: remove hard-coded MIPS boards
Remove all  MIPS boards and use $(targets_by_arch mips) for
filling list_MIPS.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2014-04-20 13:16:43 +02:00
Daniel Schwierzeck
538cf92c8c MIPS: drop incaip board
This is dead hardware and no one is interested in making the
necessary changes for upcoming features like generic board or
driver model.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
2014-04-20 13:16:43 +02:00
Albert ARIBAUD
3e11350255 Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts:
	Makefile
	drivers/net/npe/Makefile

These two conflicts arise from commit 0b2d3f20
("ARM: NET: Remove the IXP NPE ethernet driver") and are
resolved by deleting the drivers/net/npe/Makefile file
and removing the CONFIG_IXP4XX_NPE line from Makefile.
2014-02-20 13:16:05 +01:00
Masahiro Yamada
7390643f7b Makefile: remove a cleaning target "tidy"
Before this commit, "make tidy" did
"make clean" + delete "*.depend*" files.

But, we do not have "*.depend*" files any more,
which means "make tidy" is the same as "make clean".

This commit removes the redandant target "tidy".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-02-19 11:07:51 -05:00
Masahiro Yamada
9e4140329e kbuild: change out-of-tree build
This commit changes the working directory
where the build process occurs.

Before this commit, build process occurred under the source
tree for both in-tree and out-of-tree build.

That's why we needed to add $(obj) prefix to all generated
files in makefiles like follows:
  $(obj)u-boot.bin:  $(obj)u-boot

Here, $(obj) is empty for in-tree build, whereas it points
to the output directory for out-of-tree build.

And our old build system changes the current working directory
with "make -C <sub-dir>" syntax when descending into the
sub-directories.

On the other hand, Kbuild uses a different idea
to handle out-of-tree build and directory descending.

The build process of Kbuild always occurs under the output tree.
When "O=dir/to/store/output/files" is given, the build system
changes the current working directory to that directory and
restarts the make.

Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>"
syntax for descending into sub-directories.
(We can write it like "make $(obj)=<sub-dir>" with a shorthand.)
This means the current working directory is always the top
of the output directory.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Gerhard Sittig <gsi@denx.de>
2014-02-19 11:07:50 -05:00
Albert ARIBAUD
a87a0ce702 Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master' 2014-02-19 07:15:01 +01:00
Alexey Brodkin
568c1fade9 arc: add architecture to MAKEALL
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Francois Bedard <fbedard@synopsys.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
2014-02-07 08:14:33 -05:00
Marek Vasut
c8d4b2f826 ARM: IXP: Remove the IXP architecture support
The architecture is unmaintained and dead, remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michael Schwingen <michael@schwingen.org>
Cc: Tom Rini <trini@ti.com>
2014-02-06 02:51:52 +01:00
David Feng
2475e63475 arm64: MAKEALL, filter armv8 boards from LIST_arm
Signed-off-by: David Feng <fenghua@phytium.com.cn>
2014-01-09 16:09:00 +01:00
Masahiro Yamada
4d1584bd0d MAKEALL: add -b (--board) option
Some board have multiple configurations.
For example, the board "m54455evb" has many configurations:
M54455EVB, M54455EVB_a66, M54455EVB_i66, M54455EVB_intel, ...

When we modify board-related files, we need to test
all configurations based on such a board.

In such a case, the new option -b is useful.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2013-11-25 10:41:54 -05:00
Masahiro Yamada
8948794a27 MAKEALL: rename boards_by_* functions to targets_by_*
We expect boards_by_* function to return the 7th filed, 'Target',
not the 6th field, 'Board name'.

So the function names, boards_by_* are a little misleading,
and should be renamed to targets_by_*.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-11-08 09:38:24 -05:00
Masahiro Yamada
8e5a2d4257 MAKEALL: fix boards_by_field function
Commit 27af930e changed the boards.cfg format
and it changed boards_by_field() function incorrectly.
For tegra cpus it returned Board Name field,
not Target field.

This commit restores the behavior prior to 27af930e in the right way.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-11-08 09:38:24 -05:00
Masahiro Yamada
54d1f5048a MAKEALL: fix a bug to use CROSS_COMPILE_<ARCH>
Commit 27af930e changed the boards.cfg format but
missed to change get_target_arch() fuction.
This commit adjusts it for CROSS_COMPILE_<ARCH>
to work correctly.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-11-08 09:38:24 -05:00
Masahiro Yamada
23d6410c2d MAKEALL: fix awk warning message
If you do `./MAKEALL -M ` or `./MAKEALL -m`
GNU awk would display warnings like follows:

    awk: warning: escape sequence `\ ' treated as plain ` '

In the first place, we do not explicitly set the field separator.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-11-08 09:38:24 -05:00
Wolfgang Denk
93e1459641 Coding Style cleanup: replace leading SPACEs by TABs
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Drop changes for PEP 4 following python tools]
Signed-off-by: Tom Rini <trini@ti.com>
2013-10-14 16:06:54 -04:00
Albert ARIBAUD
0610a16cf2 omap1510inn: arm925t: remove support
omap1510inn is orphan and has been for years now.
Reove it and, as it was the only arm925t target,
also remove arm925t support.
Update doc/README.scrapyard accordingly.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-10-07 19:25:19 +02:00
Albert ARIBAUD
27af930e9a Merge and reformat boards.cfg and MAINTAINERS
Put all informations about targets, including state (active or
orphan) and maintainers, in boards.cfg; remove MAINTAINERS;
adjust the build system accordingly.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2013-09-12 09:14:37 -04:00
Wolfgang Denk
eca3aeb352 Licenses: introduce SPDX Unique Lincense Identifiers
Like many other projects, U-Boot has a tradition of including big
blocks of License headers in all files.  This not only blows up the
source code with mostly redundant information, but also makes it very
difficult to generate License Clearing Reports.  An additional problem
is that even the same lincenses are referred to by a number of
slightly varying text blocks (full, abbreviated, different
indentation, line wrapping and/or white space, with obsolete address
information, ...) which makes automatic processing a nightmare.

To make this easier, such license headers in the source files will be
replaced with a single line reference to Unique Lincense Identifiers
as defined by the Linux Foundation's SPDX project [1].  For example,
in a source file the full "GPL v2.0 or later" header text will be
replaced by a single line:

        SPDX-License-Identifier:        GPL-2.0+

We use the SPDX Unique Lincense Identifiers here; these are available
at [2].

Note: From the legal point of view, this patch is supposed to be only
a change to the textual representation of the license information,
but in no way any change to the actual license terms. With this patch
applied, all files will still be licensed under the same terms they
were before.

Note 2: The apparent difference between the old "COPYING" and the new
"Licenses/gpl-2.0.txt" only results from switching to the upstream
version of the license which is differently formatted; there are not
any actual changes to the content.

Note 3: There are some recurring questions about linense issues, such
as:
    - Is a "All Rights Reserved" clause a problem in GPL code?
    - Are files without any license header a problem?
    - Do we need license headers at all?

The following excerpt from an e-mail by Daniel B. Ravicher should help
with these:

| Message-ID: <4ADF8CAA.5030808@softwarefreedom.org>
| Date: Wed, 21 Oct 2009 18:35:22 -0400
| From: "Daniel B. Ravicher" <ravicher@softwarefreedom.org>
| To: Wolfgang Denk <wd@denx.de>
| Subject: Re: GPL and license cleanup questions
|
| Mr. Denk,
|
| Wolfgang Denk wrote:
| > - There are a number of files which do not include any specific
| > license information at all. Is it correct to assume that these files
| > are automatically covered by the "GPL v2 or later" clause as
| > specified by the COPYING file in the top level directory of the
| > U-Boot source tree?
|
| That is a very fact specific analysis and could be different across the
| various files.  However, if the contributor could reasonably be expected
| to have known that the project was licensed GPLv2 or later at the time
| she made her contribution, then a reasonably implication is that she
| consented to her contributions being distributed under those terms.
|
| > - Do such files need any clean up, for example should we add GPL
| > headers to them, or is this not needed?
|
| If the project as a whole is licensed under clear terms, you need not
| identify those same terms in each file, although there is no harm in
| doing so.
|
| > - There are other files, which include both a GPL license header
| > _plus_ some copyright note with an "All Rights Reserved" clause. It
| > has been my understanding that this is a conflict, and me must ask
| > the copyright holders to remove such "All Rights Reserved" clauses.
| > But then, some people claim that "All Rights Reserved" is a no-op
| > nowadays. License checking tools (like OSLC) seem to indicate this is
| > a problem, but then we see quite a lot of "All rights reserved" in
| > BSD-licensed files in gcc and glibc. So what is the correct way to
| > deal with such files?
|
| It is not a conflict to grant a license and also reserve all rights, as
| implicit in that language is that you are reserving all "other" rights
| not granted in the license.  Thus, a file with "Licensed under GPL, All
| Rights Reserved" would mean that it is licensed under the GPL, but no
| other rights are given to copy, modify or redistribute it.
|
| Warm regards,
| --Dan
|
| Daniel B. Ravicher, Legal Director
| Software Freedom Law Center (SFLC) and Moglen Ravicher LLC
| 1995 Broadway, 17th Fl., New York, NY 10023
| (212) 461-1902 direct  (212) 580-0800 main  (212) 580-0898 fax
| ravicher@softwarefreedom.org   www.softwarefreedom.org

[1] http://spdx.org/
[2] http://spdx.org/licenses/

Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-07-24 09:44:16 -04:00
Tom Rini
54e458de55 Revert "MIPS: Jz4740: Add qi_lb60 board support"
The files board/qi/qi_lb60/qi_lb60.c and include/configs/qi_lb60.h were
licensed under the GPL v3 or later, and not v2 or later.  As this is
incompatible with the project, revert this board support until the
responsible parties are available to re-license (if so desired) under
GPL v2.

Signed-off-by: Tom Rini <trini@ti.com>
2013-07-15 09:19:39 -04:00
Wolfgang Denk
d6ed322222 Power: remove support for Freescale MPC8220
The Freescale MPC8220 Power Architecture processors have long reached
EOL; Freescale does not even list these any more on their web site.

Remove the code to avoid wasting maitaining efforts on dead stuff.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
2013-05-15 08:41:03 -04:00
York Sun
c17b94ec5e MAKEALL: Fix case substitution for old bash
Bash ver 3.x doesn't support the parameter expansion with case
substitution. Use tr instead.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Allen Martin <amartin@nvidia.com>
2013-04-02 16:23:34 -04:00
Stephen Warren
f32c08da82 MAKEALL: allow regex matches for -s option
This allows:

MAKEALL -s tegra

to replace:

MAKEALL -s tegra20 -s tegra30 -s tegra114

The following also works:

MAKEALL -s tegra -s omap

Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-27 15:29:32 -04:00
Andreas Bießmann
6bdd9f8967 MAKEALL: fix kill_children for BSD hosts
ps on BSD hosts (like OS X) do not provide the --no-headers switch nor
understand the AIX format descriptions. Unfortunately there seems no solution to
get the PIDs of children in a platfrom independent manner.
Therefore detect the OS and decide upon that which way to go.

This patch makes the MAKEALL script cleanly stoppable on bare OS X when using
the parallel builds of targets.

Additionally this patch removes double call to grep by a single call to sed for
GNU style child PID detection.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2013-03-11 17:00:28 -04:00
Allen Martin
47104c37de MAKEALL: add support for per architecture toolchains
Add support for per architecture CROSS_COMPILE toolchain definitions
via CROSS_COMPILE_ARCH where "ARCH" is any of the supported u-boot
architectures.  This allows building every supported u-boot board in a
single pass of MAKEALL.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
2013-02-20 09:40:34 -05:00
Joe Hershberger
0851020479 MAKEALL: Add options for incremental building
--continue will allow you to <ctrl-c> the MAKEALL and pick up where
you left off.

--rebuild-errors will allow you to rebuild only those boards which
had trouble on the last run of MAKEALL, allowing you to quickly test
a simple fix on just those boards.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2012-12-06 11:23:00 -07:00
Joe Hershberger
c97d59cbda MAKEALL: Fix kill_children
When building in parallel, make sure that we look up the children
based on the the actual process group id instead of just assuming
that the MAKEALL pid is the process group id.

Also ensure that logs from incomplete builds are deleted in the
process.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2012-12-06 11:23:00 -07:00
Stefan Roese
24dede480c MAKEALL: Add spear platform target to compile all SPEAr boards
Signed-off-by: Stefan Roese <sr@denx.de>
2012-11-07 01:29:46 +01:00
Tom Rini
ed296d206a MAKEALL: Add -s to '${MAKE} tidy' section
When BUILD_NBUILDS is > 1 we run the tidy command.  With the addition of
DocBook this now includes a -C doc/DocBook and a 'entering/leaving' pair
of messages happen.  Since we don't want to see what's being cleaned
here, we can just invoke make -s like we do when building.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-29 14:21:20 -07:00
Kim Phillips
33f336d528 MAKEALL: add a -C/--check option to enable build checking
thanks to Tom Rini for the good idea.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2012-10-15 11:54:03 -07:00
Tom Rini
61c0d6ae77 gth2: Remove this platform
After taking with the former maintainer, delete this platform.  The
patch is from the former maintainer.

Signed-off-by: Tom Rini <trini@ti.com>
2012-10-15 11:53:46 -07:00
Allen Martin
cce5d210e6 MAKEALL: fix per arch board lists
The LIST_arm rule included the Atmel boards twice (by virtue of
including both LIST_at91 and LIST_ARM9) and was missing all the
arm720t, arm946es, and arm1176 boards.  Change this list to use
boards_by_arch() which is less error prone.  After this change
"./MAKEALL arm" and "./MAKEALL -a arm" build the same boards.

Also fix up some missing and duplicate boards to arm, mips, and m68k.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Tom Rini <trini@ti.com>
2012-09-25 13:28:05 -07:00
Allen Martin
aa2e279d2a MAKEALL: update to work with new boards.cfg syntax
Update MAKEALL to handle the optional SPL CPU field that was added to
boards.cfg.  This impacts the cases in MAKEALL that have to match
against CPU type (field 3).  In these cases use ':' as a field
separator to split the u-boot CPU from the SPL CPU.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-09-01 14:58:21 +02:00
Andy Fleming
033220e7a4 MAKEALL: Allow empty ERR directory
If we build everything correctly with multiple builds, and an
ERR directory had been previously created, we failed to report
that everything was fine because grep failed to find anything
in the ERR directory. Use grep -r, which doesn't complain if
there are no input files.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Tested-by: Tom Rini <trini@ti.com>
2012-08-09 21:22:05 +02:00
Joe Hershberger
b86a475c1a MAKEALL: Report boards with errors vs warnings
In the summary, indicate which boards errored and which boards merely
warned.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Andy Fleming <afleming@freescale.com>
2012-05-22 10:19:04 +02:00
Joe Hershberger
b594bd6ab3 MAKEALL: Fix error reporting for BUILD_NBUILDS==1
This was broken by f588bb034d

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Andy Fleming <afleming@freescale.com>
2012-05-22 10:18:17 +02:00
Andy Fleming
f50bf50d7f Improve MAKEALL parallel builds
The patch that added parallel builds broke MAKEALL -l, so this
fixes that. At the same time, it improves the termination so
that it shuts down the build threads if you cancel the build.
Lastly, it removes a bunch of debug code.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Tested-by: Wolfgang Denk <wd@denx.de>
2012-05-18 13:49:04 +02:00
Andy Fleming
bb1c01eaf6 Remove extra boards from LIST_ixp
pdnb3 and scpu are explicitly on LIST_ixp, even though they are
also specified in boards.cfg as having cpu ixp. This means that
they will be built twice when doing ./MAKEALL ixp, or ./MAKEALL arm.

This was pointless before, but actually breaks things if you launch
both builds at the same time, as they overwrite each other.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-05-18 13:44:40 +02:00
Andy Fleming
f588bb034d Allow for parallel builds and saved output
The MAKEALL script cleverly runs make with the appropriate options
to use all of the cores on the system, but your average U-Boot build
can't make much use of more than a few cores.  If you happen to have
a many-core server, your builds will leave most of the system idle.

In order to make full use of such a system, we need to build multiple
targets in parallel, and this requires directing make output into
multiple directories. We add a BUILD_NBUILDS variable, which allows
users to specify how many builds to run in parallel.
When BUILD_NBUILDS is set greater than 1, we redefine BUILD_DIR for
each build to be ${BUILD_DIR}/${target}. Also, we make "./build" the
default BUILD_DIR when BUILD_NBUILDS is greater than 1.

MAKEALL now tracks which builds are still running, and when one
finishes, it starts a new build.

Once each build finishes, we run "make tidy" on its directory, to reduce
the footprint.

As a result, we are left with a build directory with all of the built
targets still there for use, which means anyone who wanted to use
MAKEALL as part of a test harness can now do so.

Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-04-30 16:52:19 +02:00
Marek Vasut
9b96c6b11f MAKEALL: Add -m/-M option to determine maintainers
The -m option tries to find the board in MAINTAINERS file and figure out the
email. The -M option lists boards including their maintainers emails and all
affiliated emails. There are multiple strategies used to retrieve these emails:

1) Check board/<boardname> with git log and use three most recent emails
2) Check board/<boardname> with git log and use three most used emails
3) Try finding board in MAINTAINERS file and retrieve all emails from there

The result is then sorted and unique results are retrieved and reported.

For -m option, only strategy 3) is used.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2012-03-30 22:34:58 +02:00
Scott Wood
0c18569606 MAKEALL: display SPL size if present
This makes it easier to detect changes in the SPL portion,
as can currently be done for the main U-Boot image.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Tom Rini <trini@ti.com>
2012-03-26 13:42:07 +02:00
Stefan Kristiansson
deddf5d2e3 openrisc: Add architecture to MAKEALL
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
2012-01-13 21:17:04 +01:00
Wolfgang Denk
b9f31cc42c ARM: convert "omap730p2" boards to boards.cfg
Signed-off-by: Wolfgang Denk <wd@denx.de>
Dave Peverley <dpeverley@mpc-data.co.uk>
Acked-by: Tom Rini <trini@ti.com>
2011-12-10 23:13:06 +01:00
Wolfgang Denk
c81f9cdd22 ARM: convert "omap16xx" boards to boards.cfg
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kshitij Gupta <kshitij@ti.com>
Acked-by: Tom Rini <trini@ti.com>
2011-12-10 23:12:12 +01:00
Wolfgang Denk
a276db28ca ARM: convert "apollon" board to use boards.cfg
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2011-12-10 23:10:36 +01:00